Yamaha RX-V1067 User manual

101183
SERVICE MANUAL
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■CONTENTS
TO SERVICE PERSONNEL ............................................2
FRONT PANELS .........................................................3–4
REAR PANELS ...........................................................5–8
REMOTE CONTROL PANELS .......................................9
SPECIFICATIONS / 参考仕様 ................................. 10–15
INTERNAL VIEW .......................................................... 16
SERVICE PRECAUTIONS / サービス時の注意事項 ..... 16
DISASSEMBLY PROCEDURES / 分解手順 ........... 17–20
UPDATING FIRMWARE /
ファームウェアの書き込み .....................................21–22
AMP ADJUSTMENT / アンプ部調整 .......................23–25
SELF-DIAGNOSTIC FUNCTION /
ダイアグ（自己診断機能）
.......................................26–67
DISPLAY DATA .......................................................68–70
IC DATA ...................................................................71–90
PIN CONNECTION DIAGRAMS .............................91–94
BLOCK DIAGRAMS ................................................95–99
PRINTED CIRCUIT BOARDS ............................. 100–126
SCHEMATIC DIAGRAMS ................................... 127–145
REPLACEMENT PARTS LIST ............................ 147–177
REMOTE CONTROL ........................................... 178–180
ADVANCED SETUP ............................................ 181–183
本機の基本設定/初期化を行う ........................... 184–185
AV RECEIVER
'10.08
Copyright © 2010 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan
RX-V1067/HTR-8063/
RX-A1000
Note: When IC502 of NET P.C.B. or NET P.C.B. is replaced, the network function of this unit will not operate properly
without additional setting.
In such case, report the serial number of this unit to the following e-mail address.
Yamaha Corporation will reply providing the setting procedure to make the network function of this unit operate
properly.
注意：
NETP.C.B. および IC502（NETP.C.B.）を交換した場合、本機のネットワーク機能が正常に動作しません。
正常に動作させるための設定方法は、YCJ（YamahaCorporationJapan）からご連絡します。
はじめに、交換した本機のシリアルナンバーを下記の E-mail アドレスへ報告してください。
E-mail: yca[email protected]amaha.com
RX-V1067/HTR-8063/
RX-A1000
DRAFT

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
1. Critical Components Information
Components having special characteristics are marked ⚠and
must be replaced with parts having specifications equal to those
originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
• Meter impedance should be equivalent to 1500 ohms shunted
by 0.15 F.
■TO SERVICE PERSONNEL
• Leakage current must not exceed 0.5mA.
• Be sure to test for leakage with the AC plug in both polarities.
WARNING: CHEMICAL CONTENT NOTICE!
For U model
“CAUTION”
“F2003: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 10A,
125V FUSE.”
For C model
CAUTION
F2003: REPLACE WITH SAME TYPE 10A, 125V FUSE.
ATTENTION
F2003: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 10A, 125V.
WALL
OUTLET EQUIPMENT UNDER TEST
AC LEAKAGE
TESTER OR
EQUIVALENT
INSULATING
TABLE
本機に搭載されているすべての基板およびハンダ付けに
よる接合部は無鉛ハンダでハンダ付けされています。
無鉛ハンダにはいくつかの種類がありますが、修理時に
は下記のような無鉛ハンダの使用を推奨します。
󱾁 Sn+Ag+Cu（錫+銀+銅）
󱾁 Sn+Cu（錫 + 銅）
󱾁 Sn+Zn+Bi（錫 + 亜鉛 + ビスマス）
注意：
無鉛ハンダの融点温度は通常の鉛入りハンダに比べ 30 〜
40℃程度高くなっていますので、それぞれのハンダに合っ
たハンダごてをご使用ください。
All of the P.C.B.s installed in this unit and solder joints are
soldered using the lead free solder.
Among some types of lead free solder currently available,
it is recommended to use one of the following types for
the repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder
is about 30°C to 40°C (50°F to 70°F) higher than that of
the lead solder, be sure to use a soldering iron suitable
to each solder.
About lead free solder / 無鉛ハンダについて
2
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
DRAFT

C, R, T, K, A, B, G, F, L models
J model
■FRONT PANELS
3
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RX-V1067 (R, T, K, A, B, G, F, L, J models)
HTR-8063 (C model)
DRAFT

4
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RX-A1000 (C, A models)
RX-A1000 (U model)
DRAFT

■REAR PANELS
5
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RX-V1067 (R model)
RX-V1067 (T model)
RX-V1067 (K model)
DRAFT

6
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RX-V1067 (A model)
RX-V1067 (B, G, F models)
RX-V1067 (L model)
DRAFT

7
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RX-V1067 (J model)
HTR-8063 (C model)
RX-A1000 (U model)
DRAFT

8
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RX-A1000 (C model)
RX-A1000 (A model)
DRAFT

■REMOTE CONTROL PANELS
9
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
RAV346
(U model)
RAV347
(C, R, A, L, J models)
RAV348
(T, K, B, G, F models)
DRAFT

■Audio Section / オーディオ部
Minimum RMS Output Power (Power Amp. Section) /
定格出力（パワーアンプ部）
[RX-V1067/RX-A1000] (20 Hz to 20 kHz, 0.06 % THD)
U, C, R, T, K, A, B, G, F, L models (8 ohms)
FRONT L/R .............................................................105 W + 105 W
CENTER ............................................................................... 105 W
SURROUND L/R .....................................................105 W + 105 W
SURROUND BACK L/R ..........................................105 W + 105 W
J model (6 ohms)
FRONT L/R .............................................................105 W + 105 W
CENTER ............................................................................... 105 W
SURROUND L/R .....................................................105 W + 105 W
SURROUND BACK L/R ..........................................105 W + 105 W
[HTR-8063] (1 kHz, 0.7 % THD, 8 ohms)
U, C models
FRONT L/R .............................................................120 W + 120 W
CENTER ............................................................................... 120 W
SURROUND L/R .....................................................120 W + 120 W
SURROUND BACK L/R ..........................................120 W + 120 W
Maximum Effective Output Power / 実用最大出力（非同時駆動）
(1 kHz, 10 % THD, JEITA)
R, T, K, L models (8 ohms)
FRONT L/R .............................................................145 W + 145 W
CENTER ............................................................................... 145 W
SURROUND L/R .....................................................145 W + 145 W
SURROUND BACK L/R ..........................................145 W + 145 W
J model (6 ohms)
FRONT L/R .............................................................145 W + 145 W
CENTER ............................................................................... 145 W
SURROUND L/R .....................................................145 W + 145 W
SURROUND BACK L/R ..........................................145 W + 145 W
Max. Power Per Channel (1 kHz, 0.7 % THD, 4 ohms)
[B, G, F models]
FRONT L/R ................................................................165 W + 165 W
CENTER .................................................................................. 165 W
SURROUND L/R .......................................................165 W + 165 W
SURROUND BACK L/R ............................................165 W + 165 W
IEC Power (1 kHz, 0.06 % THD, 8 ohms) [B, G, F models]
FRONT L/R drive .......................................................110 W + 110 W
Dynamic Power Per Channel (IHF) [U, C, R, T, K, A, L models]
FRONT L/R drive
(8 / 6 / 4 / 2 ohms) ..................................... 135 / 165 / 210 / 280 W
Dynamic Headroom [U, C, R, T, K, A, L models]
8 ohms ....................................................................................1.1 dB
Damping Factor / ダンピングファクタ (1 kHz, 8 ohms)
FRONT L/R ..................................................................... 150 or more
Input Sensitivity/Input Impedance / 入力感度／入力インピーダンス
(1 kHz, 100 W/8 ohms)
PHONO (MM) .................................................... 3.5 mV / 47 k-ohms
AUDIO2, etc. .................................................... 200 mV / 47 k-ohms
MULTI CH INPUT
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R,
SUBWOOFER
..................................................................... 200 mV / 47 k-ohms
Maximum Input Signal / 最大許容入力 (1 kHz)
PHONO (MM) (0.1 % THD) .......................................60 mV or more
AUDIO2, etc. (0.5 % THD) ...........................................2.4 V or more
Output Level/Output Impedance / 出力電圧／出力インピーダンス
AV OUT ............................................................ 200 mV / 1.2 k-ohms
HEADPHONE OUT ............................................ 150 mV / 100 ohms
PRE OUT
FRONT, CENTER, SURROUND, SURROUND BACK (1 kHz)
SUBWOOFER (50 Hz)
....................................................................... 1.0 V / 1.2 k-ohms
ZONE2 OUT ......................................................... 1.0 V / 1.2 k-ohms
■SPECIFICATIONS /
参考仕様
Frequency Response / 周波数特性 (10 Hz to 100 kHz)
AUDIO2, etc. to FRONT L/R (Pure Direct) ........................0 / -3.0 dB
RIAA Equalization Deviation / RIAA 偏差 (20 Hz to 20 kHz)
PHONO (MM) ................................................................... 0 ±0.5 dB
Total Harmonic Distortion / 全高調波歪率 (20 Hz to 20 kHz)
PHONO (MM) to AV OUT (1 V)
.................................................................................0.02 % or less
AV1 etc. to SP OUT FRONT L/R (55 W/8 ohms)
.................................................................................0.04 % or less
Signal to Noise Ratio / 信号対雑音比 (IHF-A Network)
PHONO (MM) (Input shorted) to AV OUT
U, C, R, T, K, L models (5 mV) ................................ 86 dB or more
A, B, G, F models (5 mV) ........................................ 81 dB or more
J model (2.5 mV) ..................................................... 80 dB or more
AUDIO2, etc. (Input shorted) to SP OUT
200 mV .................................................................... 98 dB or more
250 mV .................................................................. 100 dB or more
Residual Noise / 残留ノイズ (IHF-A Network)
FRONT L/R to SP OUT.................................................150 µV or less
Channel Separation / チャンネルセパレーション (1 kHz / 10 kHz)
PHONO (Input shorted)
...................................................... 60 dB or more / 55 dB or more
AV1, etc. (Input 5.1 k-ohms shorted)
....................................................... 60 dB or more / 45 dB or more
Volume Control / 音量調整
Main Zone ........................ MUTE / -80 dB to +16.5 dB / 0.5 dB step
Other Zone (ZONE2) ....... MUTE / -80 dB to +16.5 dB / 0.5 dB step
Tone Control Characteristics / トーンコントロール特性
Main Zone (FRONT)
BASS
Boost/Cut ......................................... ±6 dB / 0.5 dB step / 50 Hz
Turnover frequency ..........................................................350 Hz
TREBLE
Boost/Cut ........................................±6 dB / 0.5 dB step / 20 kHz
Turnover frequency ......................................................... 3.5 kHz
Other Zone (ZONE2)
BASS
Boost/Cut ........................................ ±10 dB / 2 dB step / 100 Hz
Turnover frequency ..........................................................350 Hz
TREBLE
Boost/Cut .........................................±10 dB / 2 dB step / 10 kHz
Turnover frequency ......................................................... 3.5 kHz
Filter Characteristics / フィルタ特性
(fc=40/60/80/90/100/110/120/160/200 Hz)
High Pass Filter (H.P.F.)
FRONT, CENTER, SURROUND, SURROUND BACK small
....................................................................................12 dB/oct.
Low Pass Filter (L.P.F.)
SUBWOOFER
....................................................................................24 dB/oct.
10
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
DRAFT

U........................U.S.A. model
C..................Canadian model
R.....................General model
T..................... Chinese model
K ......................Korean model
A .................Australian model
B.......................British model
G..................European model
F..................... Russian model
L..................Singapore model
J .................. Japanese model
■Video Section / ビデオ部
Video Signal Type / ビデオ信号方式
Wall paper/GUI / 壁紙／ GUI (Monitor/Zone out)
U, C, R, K, J models .......................................................NTSC/PAL
T, A, B, G, F, L models ....................................................PAL/NTSC
Video conversion /ビデオコンバージョン
.......................................................................................NTSC/PAL
Composite Video Signal Level / コンポジットビデオ信号
...............................................................................1 Vp-p / 75 ohms
S-Video Signal Level / S ビデオ信号
Y .............................................................................1 Vp-p / 75 ohms
C (NTSC) ........................................................0.286 Vp-p / 75 ohms
(PAL) ...............................................................0.3 Vp-p / 75 ohms
Component Video Signal Level / コンポーネントビデオ信号
Y .............................................................................1 Vp-p / 75 ohms
Pb/Pr ...................................................................0.7 Vp-p / 75 ohms
D4 Video Signal Level / D4 ビデオ信号 [J model]
Y .............................................................................1 Vp-p / 75 ohms
Pb/Pr ...................................................................0.7 Vp-p / 75 ohms
Video Maximum Input Level / ビデオ最大許容入力
(VIDEO conversion OFF)
................................................................................ 1.5 Vp-p or more
Signal to Noise Ratio / 信号対雑音比 (VIDEO conversion OFF)
................................................................................... 60 dB or more
Frequency Response / 周波数帯域 (VIDEO conversion OFF)
(Monitor/Zone out)
Component video signal /コンポーネントビデオ信号
.................................................................5 Hz to 100 MHz, ±3 dB
D4 video signal /D4 ビデオ信号 [J model]
.................................................................5 Hz to 100 MHz, ±3 dB
■FM Section / FM部
Tuning Range / 受信周波数範囲
U, C models .........................................................87.5 to 107.9 MHz
R, L models ..............................87.5 to 108.0 / 87.50 to 108.00 MHz
T, K, A, B, G, F models .................................... 87.50 to 108.00 MHz
J model ..................................................................76.0 to 90.0 MHz
50 dB Quieting Sensitivity / 50dBSN 感度 (IHF)
(1 kHz, 100 % MOD.)
Mono ...................................................................... 3.0 µV (20.8 dBf)
Signal to Noise Ratio / S／N比 (IHF)
U model (HD) ...........................................................................80 dB
C, R, T, K, A, B, G, F, L, J models (Mono) ................................74 dB
C, R, T, K, A, B, G, F, L, J models (Stereo) ..............................70 dB
Harmonic Distortion / 歪率 (1 kHz)
U model (HD) ......................................................................... 0.03 %
C, R, T, K, A, B, G, F, L, J models (Mono) ................................ 0.3 %
C, R, T, K, A, B, G, F, L, J models (Stereo) .............................. 0.3 %
Antenna Input / アンテナ入力
......................................................................... 75 ohms unbalanced
■AM Section / AM部
Tuning Range / 受信周波数範囲
U, C models ........................................................... 530 to 1,710 kHz
R, L models ..................................... 530 to 1,710 / 531 to 1,611 kHz
T, K, A, B, G, F, J models ....................................... 531 to 1,611 kHz
Antenna / アンテナ
..................................................................................... Loop antenna
■General / 総合
Power Supply / 電源電圧
U, C models ............................................................ AC 120 V, 60 Hz
R model .......................................AC 110–120/220–240 V, 50/60 Hz
T model ................................................................... AC 220 V, 50 Hz
K model .................................................................. AC 220 V, 60 Hz
A model .................................................................. AC 240 V, 50 Hz
B, G, F models ........................................................ AC 220 V, 50 Hz
L model ...................................................... AC 220–240 V, 50/60 Hz
J model .............................................................. AC 100 V, 50/60 Hz
Power Consumption / 消費電力
U model ....................................................................490 W / 620 VA
C model ....................................................................400 W / 510 VA
R, T, K, A, B, G, F, L models .................................................... 490 W
J model ................................................................................... 275 W
Standby Power Consumption (reference data) /
待機時消費電力（参考値）
HDMI control: OFF / Standby through: OFF
...................................................................................0.2 W or less
HDMI control: ON / Standby through: ON
Input: AV1(HDMI no signal)
............................................................................. 2.7 W (typical)
NET Standby: ON
................................................................................ 4.5 W (typical)
Maximum Power Consumption (7ch drive, 10 % THD) [R, L models]
............................................................................................. 1,190 W
Dimensions (W x H x D) / 寸法（幅 × 高さ × 奥行き）
............................... 435 x 182 x 430 mm (17-1/8" x 7-1/8" x 16-7/8")
Weight / 質量
............................................................................. 14.7 kg (32.4 lbs.)
Finish / 仕上げ
[RX-V1067]
J model ..........................................................................Gold color
R, T, K, A, B, G, F, L, J models ..................................... Black color
R, G, F, L models ......................................................Titanium color
[HTR-8063]
C model ........................................................................ Black color
[RX-A1000]
U, C, A models ............................................................. Black color
Accessories / 付属品
Remote control ..............................................................................x 1
Batteries (R03, AAA, UM-4) ..........................................................x 2
Indoor FM antenna (1.4 m) ...........................................................x 1
AM loop antenna (1.2 m) ..............................................................x 1
YPAO microphone (6.0 m) ............................................................x 1
Power cable (2 m) (U, C, R, T, K, A, B, G, F, J models) ...............x 1
(2 m) (L model) .......................................................x 2
*Specifications are subject to change without notice.
※ 参考仕様および外観は、製品の改良のため予告なく変更すること
があります。
11
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
DRAFT

•DIMENSIONS /
寸法図
Unit: mm (inch)
単位：mm（インチ）
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and
the double-D symbol are trademarks of Dolby Laboratories.
ドルビーラボラトリーズからの実施権に基づき製造されています。「ドルビー」、
「PROLOGIC」、「SurroundEX」およびダブル D 記号 、ドルビーラボラトリー
ズの商標です。
“SILENT CINEMA” is a trademark of Yamaha Corporation.
「サイレントシネマ™ SILENTCINEMA ™」はヤマハ株式会社の登録商標です。
AAC ロゴマーク はドルビーラボラトリーズの商標です。
Rhapsody and the Rhapsody logo are registered trademarks of
RealNetworks, Inc.
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM
Radio Inc. and its subsidiaries. All rights reserved. Service not available in
Alaska and Hawaii.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio, and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
DTS および記号は DTS 社の登録商標です。また、DTS-HD、DTS-HDMaster
Audio、および DTS ロゴは DTS 社の商標です。製品にはソフトウェアを含みます。
著作権 DTS社。不許複製。
“iPod” is a trademark of Apple Inc., registered in the U.S. and other
countries. “iPhone” is a trademark of Apple Inc.
iPod は、米国および他の国々で登録された AppleInc. の商標または登録商標で
す。
iPhone は、AppleInc. の商標または登録商標です。
Bluetooth is a registered trademark of the Bluetooth SIG and is used by
Yamaha in accordance with a license agreement.
Bluetooth は、BluetoothSIG の登録商標でありヤマハはライセンスに基づき使
用しています。
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are
trademarks, or registered trademarks of HDMI Licensing LLC.
HDMI、HDMI ロ ゴ、およびHigh-DefinitionMultimediaInterface は、HDMI
Licensing,LLC の商標または登録商標です。
“x.v.Color” is a trademark of Sony Corporation.
「x.v.Color」は、ソニー株式会社の商標です。
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
MPEGLayer3 音声圧縮技術は FraunhoferIIS および Thomson によってライセン
ス供与されています。
This receiver supports network connections.
本機はネットワーク接続に対応しています。
HD Radio™ Technology Manufactured Under License From iBiquity Digital
Corp. U.S. and Foreign Patents. HD Radio™ and the HD Radio logo are
proprietary trademarks of iBiquity Digital Corp.
Front view
Top view
435 (17-1/8")
ø 60
335 (13-1/4")
50
(2")
430 (16-7/8")
382 (15")
263 (10-3/8") 61.5
(2-3/8")
182 (7-1/8") 161 (6-3/8") 27
(1")
21
(7/8")
21
(7/8")
57.5
(2-1/4")
221.5 (8-3/4") 211.5 (8-3/8")
150 (5-7/8")
RX-A1000 model
ø 18
RX-A1000 model
ø 18
12
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
DRAFT

13
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
*1Surround Decoder
Pro Logic
PL IIx Movie / PL II Movie
Decode Type PL IIx Music / PL II Music
PL IIx Game / PL II Game
Neo:6 Cinema
Neo:6 Music
•SELECT MENU
Sound field parameters
Decode Type (*1) DSP Level: -6 to +3 dB, [0] Initial Delay: 1 to 99 ms Room Size: 0.1 to 2.0 Liveness: 0 to 10 Surround Initial Delay: 1 to 49 ms Surround Room Size: 0.1 to 2.0 Surround Liveness: 0 to 10 Center Level: 0 to 100 %, [100 %] Surround L Level: 0 to 100 %, [100 %] Surround R Level: 0 to 100 %, [100 %] Surround Back Initial Delay: 1 to 49 ms Surround Back Room Size: 0.1 to 2.0 Surround Back Liveness: 0 to 10 Surround Back L Level: 0 to 100 %, [7.1CH: 35 %, 6.1CH: 50 %] Surround Back R Level: 0 to 100 %, [7.1CH: 35 %, 6.1CH: 50 %] Front Presence L Level: 0 to 100 % [33 %] Front Presence R Level: 0 to 100 % [33 %] Reverb Time: 1.0 to 5.0 s Reverb Delay: 0 to 250 ms Reverb Level: 0 to 100 % Direct: Auto / Off, [Auto] Panorama: Off / On, [Off] Center Width: 0 to 7, [3] Dimension: -3 to +3, [0] Center Image: 0.0 to 1.0, [0.3] Reset
MOVIE Standard ●● ●●● ●●● ●
Spectacle ●●●● ●● ●● ●
Sci-Fi ●●●● ●● ●● ●
Adventure ●●●● ●● ●● ●
Drama ●●●● ●● ●● ●
Mono Movie ●●●● ●●● ●
ENTERTAINMENT Sports ●●● ●● ●● ●
Action Game ●●● ●● ●● ●
Roleplaying Game ●●● ●● ●● ●
Music Video ●●● ●● ●● ●
CLASSICAL Hall in Munich ●●●● ●
Hall in Vienna ●●●● ●
Chamber ●● ● ●●● ●
LIVE/CLUB Cellar Club●●●● ●
The Roxy Theatre ●●●● ●●● ●
The Bottom Line ●●●● ●
STEREO 2ch Stereo ●●
7ch Stereo ●●● ●●●● ●
ENHANCER Enhancer On
Enhancer Off
SUR. DECODE Surround Decoder ● ●
STRAIGHT
Category Program
Parameter
DRAFT

14
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
•SET MENU TABLE / セットメニュー
MAIN MENU SUB-MENU PARAMETER VALUE [INITIAL VALUE]
Speaker
Setup
Auto Measure Optimizes the speaker configuration automatically using YPAO.
Multi Position Yes / No
Result Not Available
Manual Setting Pattern
Setting Data Copy Pattern1 ▶2 / Pattern2 ▶1
Power Amp Assign [7ch Normal] / 7ch +1ZONE / 5ch BI-AMP
Configuration
Front speaker Large / [Small]
* When “Subwoofer” is set to “None”, “Front” is disabled.
Center speaker Large / [Small] / None
Surround speaker L/R Large / [Small] / None
Surround Back speaker L/R Large x1 / Large x2 / Small x1 / [Small x2] / None
Front Presence [Use] / None
Subwoofer [Use] / None
Extra Bass Not Available
Bass Cross Over 40 / 60 / [80] / 90 / 100 / 110 / 120 / 160 / 200 Hz
Distance
Meter / [Feet]
Front L
Front R
Center
Surround L
Surround R 0.30 to 24.00 m, [3.00 m], 0.05 m step
Surround Back L 1.0 to 80.0 ft, [10.0 ft], 0.2 ft step
Surround Back R
Front Presence L
Front Presence R
Subwoofer
Level
Front L
Front R
Center
Surround L
Surround R -10.0 to +10.0 dB, [0.0 dB], 0.5 dB step
Surround Back L
Surround Back R
Front Presence L
Front Presence R
Subwoofer
Parametric EQ PEQ Select Manual / Flat / Front / Natural / [Through]
PEQ Data Copy
Flat > Manual / Front > Manual / Natural > Manual
*Select “ENTER”
Front L Band / Gain ▶Band: #1 to #7
Front R ▲Gain: -20.0 to +6.0 dB, [0.0 dB], 0.5 dB step
Center Freq. / Gain ▶Frequency: 31.3 Hz to 16.0 kHz, [62.5 Hz]
Surround L ▲Gain: -20.0 to +6.0 dB, [0.0 dB], 0.5 dB step
Surround R Q / Gain ▶Q: 0.500 to 10.080, [1.000]
Surround Back L ▲Gain: -20.0 to +6.0 dB, [0.0 dB], 0.5 dB step
Surround Back R Reset Yes / No *Select “ENTER”
Front Presence L
Front Presence R * When “PEQ Select” is set to “Manual”, this section is disabled.
Subwoofer
Test Tone [Off] / On
Sound Setup
Lipsync Manual / [Auto]
Select “Manual” 0 to 250 ms, [0 ms], 1 ms step
Dynamic Range [MAX] / STD / MIN/AUTO
Max. Volume -30.0 to +16.5 dB (Maximum volume), [+16.5 dB], 5.0 dB step
Initial Volume [Off] / On
Select “On” Mute, -80 to +16.5 dB, [0.0 dB], 0.5 dB step
Adaptive DSP Level [On] / Off
Video SetupAnalog to Analog Conversion Off / [On]
Processing
[Off] / On
Resolution [Auto] / 480p / 720p / 1080i / 1080p / Through *Select “ENTER”
Aspect [Through] / 16:9 Normal
DRAFT

15
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
MAIN MENU SUB-MENU PARAMETER VALUE [INITIAL VALUE]
HDMI SetupHDMI Control [Off] / On
Control Select OUT1 (TV1) / OUT2 (TV2)
ARC (Audio Return Channel) Off / [On]
TV Audio InputTV1 AV1 / AV2 / AV3 / [AV4] / AV5 / AV6 / AUDIO1 / AUDIO2
TV2 AV1 / AV2 / AV3 / AV4 / AV5 / AV6 / [AUDIO1] / AUDIO2
Audio OutputAmp [On] / Off
OUT1 On / [Off]
OUT2 On / [Off]
Standby Through [Off] / On
* When HDMI Control is set to “On”, “Standby Through” is
disabled.
Network
Setup
IP Address DHCP Off / [On]
Manual Setup IP Address
Subnet Mask
Default Gateway
DNS (Primary) / DNS (Secondary)
Network Standby [Off] / On
MAC Address Filter Mode [Off] / On
Address Setup
Multi Zone
Setup
Zone2 Set Volume Fixed / [Variable]
Max. Volume -30.0 to +16.5 dB (maximum volume), [+16.5 dB], 5.0 dB step
Initial Volume Off / Mute / -80.0 to +16.5 dB, [Off], 5.0 dB step
Mono [Off] / On
Monitor Out Assign [Main] / Zone2
Party Mode Set Target: Zone2 Disable / [Enable]
Zone Scene Rename
Zone Rename Disable / [Enable]
Function
Setup
Auto Power Down Timer 4hours / 8hours / 12hours / [Off]
Display Set Front Panel Display Dimmer -4 to 0
Scroll
Wall Paper Picture1 / Picture2 / Picture3 / Gray
Trigger OutputTrigger Mode [Power] / Source / Manual
Target Zone Main / Zone2 / [All]
* When “Trigger Mode” is set to “Power”, “Target Zone” is
disabled.
Target Source HDMI1
HDMI2
HDMI3
HDMI4
HDMI5
AV1
AV2
AV3
AV4 Low / [High]
AV5 * When “Trigger Mode” is set to “Source”, “Target Source” is
disabled.
AV6
VIDEO AUX
TUNER
Sirius Satellite Radio
AUDIO1
AUDIO2
DOCK
MULTI CH
Manual Low / [High]
* When “Trigger Mode” is set to “Manual”, “Manual” is disabled.
Memory Guard [Off] / On
Language
Setup
English (English), 日本語 (Japanese), Français (Franch),
Deutsch (German), Español (Spanish), РУccкий (Russian)
DRAFT

VIDEO (1) P.C.B.
POWER (2) P.C.B. (R model)
MAIN (3) P.C.B.
AM/FM TUNER (C, R, T, K, A, B, G, F, L, J models)
HD RADIO TUNER (U model)
FUNCTION (2) P.C.B.
FUNCTION (1) P.C.B.
POWER (1) P.C.B.
DIGITAL (3) P.C.B.
DIGITAL (1) P.C.B.
NET P.C.B.
FUNCTION (3) P.C.B.
VIDEO (2) P.C.B.
POWER (4) P.C.B.
POWER (3) P.C.B.
MAIN (2) P.C.B.
MAIN (5) P.C.B.
VIDEO (5) P.C.B.
POWER TRANSFORMER
VIDEO (3) P.C.B.
VIDEO (4) P.C.B.
MAIN (4) P.C.B.
MAIN (1) P.C.B.
OPERATION (1) P.C.B.
OPERATION (3) P.C.B.
DIGITAL (2) P.C.B.
OPERATION (2) P.C.B.
OPERATION (4) P.C.B.
Rear view
Top view
Front view
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
11 12
24
1
879 10
23
2
3
17 1621 2022 19
26 25
456
27
14 1318 15
16
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
■INTERNAL VIEW
■SERVICE PRECAUTIONS / サービス時の注意事項
安全対策
・ この製品の内部には高電圧部分があり危険です。修理
の際は、絶縁性の手袋を使用するなどの安全対策を
行ってください。
・ 下記箇所には電源を OFF にした後も電荷が残り、高電
圧が維持されており危険です。
修理作業前に放電用抵抗（5k Ω /10W）を下記箇所の
端子間に接続して放電してください。
放電所用時間は約 30 秒間です。
MAIN（3）P.C.B. の C1105、C1106
POWER（1）P.C.B. の C2016
“PRINTEDCIRCUITBOARDS：MAIN（3）P.C.B.、POWER
（1）P.C.B.” を参照してください。
Safety measures
• Some internal parts in this product contain high voltages
and are dangerous.
Be sure to take safety measures during servicing, such
as wearing insulating gloves.
• Note that positions indicated below are dangerous
even after the power is turned off because an electric
charge remains and a high voltage continues to exist
there.
Before starting any repair work, perform discharge
by connecting a discharge resistor (5k-ohms/10W)
between terminals at following positions.
The time required for discharging is about 30 seconds.
C1105 and C1106 on MAIN (3) P.C.B.
C2016 on POWER (1) P.C.B.
Refer to “PRINTED CIRCUIT BOARDS: MAIN (3) P.C.B.
and POWER (1) P.C.B.”.
DRAFT

Top cover
トップ カ バ ー
Front panel unit
フロントパネル ユニット
Sub-chassis unit
サブシャーシユニット
Push rivet
プッシュリベット
Push rivet
プッシュリベット
Side plate (L)
サイドプレート（L）
Side plate (R)
サイドプレート（R）
①
①
③
②
④
⑥
⑤
⑤
⑦
⑧
④
CB511
CB8
CB914
NET P.C.B.
FUNCTION (3) P.C.B.
VIDEO (3) P.C.B.
DIGITAL (1) P.C.B.
CB454 CB361
OPERATION (2)
CB806
17
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
Fig. 1
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (①), 4 screws (②) and 2 screws (③).
(Fig. 1)
b. Lift the rear of the top cover to remove it. (Fig. 1)
2. Removal of Front Panel Unit
and Sub-chassis Unit
a. Remove 6 screws (④) and then remove the front
panel unit forward. (Fig. 1)
b. Remove 4 push rivets and then remove the side plate
(L) and (R). (Fig. 1)
c. Remove 2 screws (⑤), 2 screws (⑥), 2 screws (⑦)
and screw (⑧). (Fig. 1)
d. Remove CB8, CB361, CB454, CB511, CB806 and
CB914. (Fig. 1)
e. Release 2 hooks, and remove the front panel unit.
(Fig. 1)
（番号順に部品を取り外してください。）
AC 電源コンセントから、電源コードを抜いてください。
1.トップカバーの外し方
a. ①のネジ 4 本、②のネジ 4 本、③のネジ 2 本を外し
ます。（Fig.1）
b. トップカバーの後部を持ち上げ、取り外します。（Fig.1）
2. フロントパネルユニットと
サブシャーシユニットの外し方
a. ④のネジ 6本を外し、フロントパネルユニットを前方
に取り外します。（Fig.1）
b. プッシュリベット 4 個を外し、サイドプレート（L）
／（R）を取り外します。（Fig.1）
c. ⑤のネジ 2 本、⑥のネジ 2 本、⑦のネジ 2 本、⑧の
ネジ 1 本を外します。（Fig.1）
d. CB8、CB361、CB454、CB511、CB806、CB914 を外し
ます。（Fig.1）
e. フック 2 箇所を外し、フロントパネルユニットを取り
外します。（Fig.1）
■DISASSEMBLY PROCEDURES / 分解手順
DRAFT

board-to-board connectors
基板対基板コネクター
board-to-board connectors
基板対基板コネクター
CB901
CB903
CB34
CB32
CB505
CB73
CB908
CB905
⑨
⑪
⑫
⑪
NET P. C. B.
DIGITAL (1) P. C. B.
CB512
FUNCTION (3) P. C. B.
CB944
CB917
CB918
CB920
CB809
CB811
CB810
CB910
CB912
CB909
⑭⑩ ⑬ Rear view
18
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
Fig. 2
Fig. 3
3. Removal of NET P.C.B.
a. Remove screw (⑨). (Fig. 2)
b. Remove 2 screws (⑩). (Fig. 3)
c. Remove CB505 and CB512 and then remove the NET
P.C.B. which is connected directly to the DIGITAL (1)
P.C.B. with board-to-board connectors. (Fig. 2)
4. Removal of DIGITAL (1) P.C.B.
a. Remove screw (⑪) and screw (⑫). (Fig. 2)
b. Remove 9 screws. (⑬) and screw (⑭). (Fig. 3)
c. Remove CB32, CB34, CB73, CB901, CB903, CB905,
CB908–910, CB912 and CB944. (Fig. 2)
d. Remove CB917–918, CB920 and then remove the
DIGITAL (1) P.C.B. which is connected directly to the
FUNCTION (2) P.C.B. with board-to-board connectors.
(Fig. 2)
3. NETP.C.B. の外し方
a. ⑨のネジ 1 本を外します。（Fig.2）
b. ⑩のネジ 2 本を外します。（Fig.3）
c. CB505、CB512 を外し、NETP.C.B. を取り外します。
ただし、NETP.C.B. は DIGITAL（1）P.C.B. に基板対基
板コネクターで直接接続されています。（Fig.2）
4. DIGITAL（1）P.C.B. の外し方
a. ⑪のネジ 1 本、⑫のネジ 1 本を外します。（Fig.2）
b. ⑬ネジ 9 本、⑭のネジ 1 本を外します。（Fig.3）
c. CB32、CB34、CB73、CB901、CB903、CB905、CB908
〜 910、CB912、CB944 を外します。（Fig.2）
d. CB917 〜 918 と CB920 を外し、DIGITAL（1）P.C.B. を
取り外します。
ただし、DIGITAL（1）P.C.B. は FUNCTION（2）P.C.B. に
基板対基板コネクターで直接接続されています。
（Fig.2）
DRAFT

Hook
フック
Hook
フック
⑯
FUNCTION (1) P. C. B.
VIDEO (1) P. C. B.
CB304
CB301
CB332
CB333
FUNCTION (3) P. C. B.
FUNCTION (2) P. C. B.
CB706
CB707
CB805
②
Remove CB333
②
Cable/ケーブル
Cable/ケーブル
Connect CB333
Lock the connector
コネクターロック
Insert the cable
ケーブルを差し込む
Connected
接続
Connected
接続
①①
①①
①
②
①
②
Unlock the connector
コネクターロック解除
Remove the cable
ケーブルを外す
⑰⑰⑰
⑮⑮ Rear view
J model
U model
19
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
5. Removal of VIDEO (1) P.C.B.
a. Remove 11 screws (⑮). (Fig. 4)
b. Remove CB304 and CB331–332. (Fig. 5)
c. Unlock and remove CB333. (Fig. 5)
d. Release 2 hooks and then remove the VIDEO (1) P.C.B.
(Fig. 5)
6. Removal of FUNCTION (1)–(3) P.C.B.s
a. Remove screw (⑯). (Fig. 5)
b. Remove 20 (U model)/19 (C, R, T, K, A, B, G, F, L
models) screws (⑰). (Fig. 4)
c. Remove CB706–707 and CB855. (Fig. 5)
d. Release hook and then remove the FUNCTION (1)
P.C.B. together with the FUNCTION (2) and (3) P.C.B.s.
(Fig. 5)
5. VIDEO（1）P.C.B. の外し方
a. ⑮のネジ 12 本を外します。（Fig.4）
b. CB304、CB331 〜 332 を外します。（Fig.5）
c. ロックを外し CB333 を外します。（Fig.5）
d. フック 2 ヶ所を外し、VIDEO（1）P.C.B. を取り外します。
（Fig.5）
6. FUNCTION（1）〜（3）P.C.B. の外し方
a. ⑯のネジ 1 本を外します。（Fig.5）
b. ⑰のネジ 19 本を外します。（Fig.4）
c. CB706 〜 707、CB855 を外します。（Fig.5）
d. フック 1 ヶ所を外し、FUNCTION（1）P.C.B. を
FUNCTION（2）、（3）P.C.B. と一緒に取り外します。
（Fig.5）
Fig. 4
Fig. 5
DRAFT

Sub-chassis unit
サブシャーシユニット
AMP unit (R) AMP unit (L)
Rubber sheet and cloth
ゴムシートと布
Ground lead
アース線
Ground lead
アース線
20
RX-V1067/HTR-8063/
RX-A1000
RX-V1067/HTR-8063/RX-A1000
When checking the P.C.B.:
• Put the rubber sheet and the cloth over this unit.
Follow the procedure below to place the amp unit.
(Fig. 6)
• Connect the ground points of the heatsink and sub-
chassis unit to the chassis with a ground lead or the
like. (Fig. 6)
• When connecting the flexible flat cable, be careful
with polarity.
• Reconnect all cables (connectors) that have been
disconnected.
Fig. 6
P.C.B. をチェックする場合には：
・ 本機の上にゴムシートと布を敷き、下図のようにア
ンプユニットを置きます。（Fig.6）
・ ヒートシンクとサブシャーシユニットのアースを
リード線等でシャーシに接続してください。（Fig.6）
・ フラットケーブルを接続する際、極性に注意してく
ださい。
・ 外したケーブル（コネクター）をすべて接続します。
DRAFT