YANXING FIT SW1 Instruction manual
Introduction of Scale Battery Installation
Flip the battery compartment
cover as the picture showed
direction.
1Install batteries according to
the picture show.
2
Remark:
1.Please place the scale on a hard and flat ground, not on soft or uneven ground, such
as mats, blankets etc., so as not to affect the accuracy of the measurement result.
2.The body report is for reference only, not as a medical opinion.
3.The scale will turn on automatically if the body weight is higher than 5KG. If the weight
is lower than 5KG, it can not be awakened.
Remark: When scale battery power to low, it show “Lo” and cannot be weighed
normally. Please replace the battery as soon as possible.
Basic Parameter
Product Name: Smart body scale
Product Model Name: SW1
Product Size: 280*280*25mm
Product Weight: 1.3KG
Measurement Capacity: 5KG ~ 150KG
Accuracy: 50g
Battery Type: 4 x AAA battery
Connection Technology: Bluetooth
Working Temperature: -10～45°C
Note: Please read this manual carefully before using the product and keep it properly.
Please remove the battery compartment cover on the
back of the scale, insert 4 AAA batteries, and then
place the scale on a flat ground. The display shows
0.00.
Digital Display Instruction
During weighing, the number flashes 3
times, indicating that the weight is
stable and the weighing is over.
Low Power Status
Digital Display
Non-slip rubber pad
Battery Cover
Firmware upgrade status
Overweight Status
Smart Body Scale
Quick Start Manual
Caution
Please do not use the body scale on slippery floors.
Please keep the surface of the scale and the soles of
your feet dry when using it.
Please use a damp cloth and neutral detergent to
clean the scale. Do not rinse it directly with water.
Do not stand on the edge of the scale when
weighing to prevent injury from falling.
Please do not place the scale in a humid
environment and keep it away from
high-temperature objects.
The weight information detected by this product is
only used as a reference for controlling body shape
and fitness, not as a medical opinion.
Scope of use
1. The body scale is suitable for the general
population to measure weight.
2. The weight of the following people may have large
errors. It is recommended to refer only to the change
trend of weight: growing children, elderly people,
patients with fever due to colds and other reasons,
patients with osteoporosis with very low bone
density, dropsy patients, artificial dialysis patients,
professional fitness trainer or athletes (or similar
people).
Connect Device
1.Connect your mobile phone to home wireless
network.
2.After scale power on, it enter Bluetooth pairing
connection mode by default.
3.Click Smart Life App on your phone, when using it
for the first time, please register/log in to your
account according to the app guidelines.
4.Go to the home page of the App, click "+" and
select "Auto Discovery", the App will search for the
smart device to be configured, and add the device
according to the App interface prompts.
If the device is not found, click "Add manually" at the top of
the scan page, and manually add the device according to
the interface prompts.
Install Smart Life App
Scan the QR code with your mobile phone, or search
for Smart Life in the app market, download and install
the App.
If your mobile phone has downloaded Smart Life App,
please make sure that the App version is the latest.
Smart Life App
