Yealink SmartVision 60 User manual

SmartVision 60 InstallationSmartVision 60 Installation
Package ContentsPackage Contents
Hardware IntroductionHardware Introduction
NO.NO. NameName DescriptionDescription
NOTENOTE
We recommend that you use the accessories provided or approved by Yealink.
The use of unapproved third-party accessories may result in poor performance
SmartVision 60 Installation
1

1Mute Button & Mute LED
Indicator Touch to mute or unmute.
2Camera Button & Camera
LED Indicator Touch to turn the camera on or off.
3 DC15 V Connect to the power adapter.
4 USB-C Port Connect to the MCore Pro.
5 Reset Button Reset to factory defaults.
6 Security Slot Connect a universal security cable to the SmartVision 60 so that
you can lock it down.
7 Circular LED Indicator Indicate the device status and Cortana status.
8 Privacy Cap Automatically cover the camera when it is turned off.
9 Camera Camera.
LED IndicatorLED Indicator
Mute LED indicatorMute LED indicator
LED StatusLED Status DescriptionDescription
Off The device is powered off. The device is idle.
Solid green Unmuted in the meeting.
Flash green Incoming call/meeting.
Solid red Muted in the meeting.
Flash red The device is entering recovery mode for firmware upgrade.
Solid orange The device is starting up.
Flash orange The firmware is updating.
Camera LED indicatorCamera LED indicator
LED StatusLED Status DescriptionDescription
Off
The device is powered off.
The device is idle.
The camera privacy cover is closed.
Solid purple The camera privacy cover is open In the meeting.
Circular LED indicatorCircular LED indicator
LED LED StatusStatus DescriptionDescription
SmartVision 60 Installation
2

Off The device is powered
off.
Solid white The device is idle.
White breathing light Cortana Listening status.
Half of the LED flashes, with the first segment in blue and the second segment in
white Cortana Thinking status.
Blue and white breathing light flash alternately Cortana Response
status.
InstallationInstallation
Assemble your SmartVision 60Assemble your SmartVision 60
Paste on a tablePaste on a table
SmartVision 60 Installation
3

Place SmartVision 60 in a Meeting RoomPlace SmartVision 60 in a Meeting Room
SmartVision 60 Installation
4

ConnectionConnection
NOTENOTE
It is recommended that you can deploy the SmartVision 60 at about 1/3 of
the front of the conference table. The distance between the SmartVision 60 and the
seats should be around 3.5~4 meters for optimal audio and video effects.
NOTENOTE
Not included accessories requirements:
Display: Resolution of 1080p or higher and with an HDMI port.
Ethernet cable: CAT5e or higher ethernet cable.
SmartVision 60 Installation
5