YIC Technologies ATG3G Series User manual

YUECHUNG INTERNATIONAL CORP. 1
URL:http://www.yic.com.tw E-mail: [e-mail]
Y
YI IC C
ATG3G Series
GPS & 3G External Antennas
Product Number ： ATG3G-35095-2.5BA
1. Picture

YUECHUNG INTERNATIONAL CORP. 2
URL:http://www.yic.com.tw E-mail: [e-mail]
Y
YI IC C
ATG3G Series
2. Electrical Characteristics
Item Specifications
GPS Antenna Dielectric Center Frequency 1575.42±3MHz
Antenna
Band Width CF±5MHz
Polarization RHCP
Gain 2dBic（Zenith）
V.S.W.R ＜1.5
Impedance 50Ω
Axial Ratio 3dB（max）
LNA Gain 28±2dB
Noise Figure ＜1.5dB
V.S.W.R ＜2.0
Supply Voltage 2.2~5V DC
Current Consumption ＜15mA
3G/GSM Antenna Frequency Range 806~960MHz/1710~2170MHz
V.S.W.R ＜2.0
Polarization Linear
Gain 2.5dBi
Impedance 50Ω
Mechanical Cable RG174
Connector SMA/MCX/FAKRA or others
Radome Material ABS
Mounting Method Adhesive
Environmental Operating Temperature -40℃~+85℃
Relative Humidity Up to 95%
Vibration 10 to 55Hz with 1.5mm amplitude 2hours
Environmentally Friendly ROHS Compliant

YUECHUNG INTERNATIONAL CORP. 3
URL:http://www.yic.com.tw E-mail: [e-mail]
Y
YI IC C
ATG3G Series
3. Radiation Pattern
GPS Antnna
3G/GSM Antenna

YUECHUNG INTERNATIONAL CORP. 4
URL:http://www.yic.com.tw E-mail: [e-mail]
Y
YI IC C
ATG3G Series
4. Drawing

YUECHUNG INTERNATIONAL CORP. 5
URL:http://www.yic.com.tw E-mail: [e-mail]
Y
YI IC C
ATG3G Series
5. Characteristics and Reliability Test
Test Items Test Condition and Procedure Requirements
C1 S.W.R. Set DUT on Network Analyzer; make individual
calibration to test
Directive DUT specification
C2 Antenna
Gain
Set DUT on Antenna Chamber; make individual
calibration to test
Directive DUT specification
M1 Vibration MIL-STD-202G, 201A
Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz
3 directions; 2 hours for each direction
1. No Visual Damage
2. Frequency Tol.<= 5%
M2 Random
Drop
Height: 1.5 Meter;
3 directions; 1 time for each direction
1. No parts separated
2. Frequency Tol.<= 5%
M3 Solderability MIL-STD-202G, 210F, cond. A
Solder iron: 350±10°C; Duration: 5 seconds
1. Mounted on PCB
2. No Visual Damage
M4 Terminal-
Pull Test
MIL-STD-202G, 211A, cond. A
Holding with individual specification; force applied
to axis of terminal
1. Directive DUT specification
2. Frequency Tol.<= 5%
M5 Terminal-
Torque Test
MIL-STD-202G, 211A, cond. E
Holding with individual specification; applied
clockwise and counterclockwise to the axis of
terminal
1. Directive DUT specification
2. Frequency Tol.<= 5%
M6 Dimension Inspection of dimension, color, material, package,
surface process
Directive DUT specification
E1 Salt Spray MIL-STD-202G, 101E, cond. B
Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%;
Time: 48 hours
After 2 Hours Recovery
1. No Visual Damage
2. Frequency Tol.<= 5%
E2 Humidity MIL-STD-202G, 103B, cond. B
Temp: 40°C; RH: >= 95%; Time: 48 hours
After 2 Hours Recovery
1. No Visual Damage
2. Frequency Tol.<= 5%
E3 Thermal
Shock
1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes)
Cycles: 24
After 2 Hours Recovery
1. No Visual Damage
2. Frequency Tol.<= 5%
E4 Life (High
Temp.)
MIL-STD-202G, 108A, cond. A
Temp: 85°C; Time: 96 hours
After 2 Hours Recovery
1. No Visual Damage
2. Frequency Tol.<= 5%
R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2002/95/EC
R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC
R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC

YUECHUNG INTERNATIONAL CORP. 6
URL:http://www.yic.com.tw E-mail: [e-mail]
Y
YI IC C
ATG3G Series
6. Note
6.1 This product specification guarantees the quality of our product
as a single unit. Please make sure that your product is evaluated
and confirmed against your specifications when our product is
mounted to your product.
6.2 The product will get free warranty for one year since the date
of purchase users operate in the correct way; users will have to
pay cost of the materials and maintaining fee out of the condition.
6.3 Electrostatic sensitive device.Observe precautions for handling.