YitaHome FTPLDB-3001 User manual

ASSEMBLY INSTRUCTIONS
Pure & Easy
STORAGE SHEDS
FTPLDB-3001
FTPLDB-3002
FTPLDB-3005
FTPLDB-3006
FTPLDB-3007
FTPLDB-3008
CONTACT US:
,
󾋸󾋿󾋿󾋿󾋾󾋸󾋾󾋿󾋷󾋿󾋻󾋿󾋷󾋷󾋻󾋺󾋷󾋿󾋷󾋷󾋸󾋹󾋷󾋷


󾋸
󾋹“”󽦁
󾋺“”
NBKTHS-V 2

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
1 2
1. Gather and organize all required parts prior to assembly.
2. Assemble on a flat, clean and soft surface.
3. Two or more people are needed for the assembly.
4. Align the holes before assembly and snap into place with a slight tap.
5. Please prepare rubber mallet in advance for convenient installation.
6. The product’s structure prevents it from being conveniently assembled in
low temperatures, so do not intentionally install at low temperatures.
7. During installation, please refer to the accessories guides to ensure that they
are installed in the correct directions.
Item
no. Reference Image Qty. Item no. Reference Image Qty.
Item
no. Reference Image Qty. Item no. Reference Image Qty.
X1
X1
X1
X1
X1
X1
A
D
F
X1
G
X1
H
B
C
E
X6
X12
X1
X1
X1
X1
X1
X18+
1extra
X24+
4extra
X12+
2extra
1
2
4
5
7
8
9
10
11
12
M8X20mm
M5X16mm
M4X8mm

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
3 4
3pcs
12
11pc
B1pc H1pc 8
Exploded View
A
E
G
HH
H
H
F
C
B
B
B
D
1
2
3
Insert part H into part B’s slot first,
then make sure it can slide
backward to the full extent.
Note: The triangularly marked spots on
parts B and H should be on the same side.
12
8

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
5 6
1pc
F
2 3 1pc
E
F
H
B
F
H
B
1
2
Insert parts F into part B’s slots first,
then make sure it can slide right to the full extent.
Insert parts E into part B’s slots first,
then make sure it can slide right to the full extent.
E
1
2

1pc
G
4
E
F
H
B
Follow the above step for parts G and B.
G
1
2
18pcs
10
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
7 8
5
10
E
F
H
B
G

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
9 10
4pcs
11
61pc
C2pcs 12pcs 2
1
2
C
C
11
4pcs
11
71pc
D2pcs 12pcs 21pc 41pc 51pc 76pcs 12
D
D
1
2
D
11
5
4
12
12
7
Note that part ① (hinge) has two sides
that differ in width.
Before fixing the installation position,
either side can be selected to ensure
that all hinges installed use the same
side width.
Note that part ① (hinge) has two sides
that differ in width.
Before fixing the installation position,
either side can be selected to ensure
that all hinges installed use the same
side width.

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
11 12
4pcs
24pcs
11
92pcs
12pcs 21pc 93pcs 12
1pc
A
8pcs
11
8
2
11
Note that part ① (hinge) has two sides
that differ in width.
Before fixing the installation position,
either side can be selected to ensure
that all hinges installed use the same
side width.
1
2
11
A
A
A
9
12
E
G
H
F
C
B
D

Installation Completed
11
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
13 14
4pcs
11
10 2pcs
2
A
2
11
E
G
H
H
F
C
B
D
Unlocked State Locked State