Yolink YS6704-UC Operation manual

In-wall Outlet
YS6704-UC
Installaon & User Guide
Rev 1.1

Contents
In the Box ······· ····· · ·· · ·1······················ ····· ···················································· · ·
Introducon ······························································································2
Set Up ····································································································· ·4·
Installaon ································································································6
Using the YoLink App ················································································11
················About YoLink Control ······························ ··································18
·Maintenance ······················································································· ····24
Specificaons ····················································································· ·····26·
Troubleshoong ················································································· ·····28·
Warning ······························································································ ····29·
Customer Service & Warranty ······························································· ····30·

1
In the Box
A. In-wall Outlet
B. (2)Cross Head Screw (M3)
C. Sloed Head Screw (M3) (2)
D. Quick Start Guide
CONTROLLED
CLASS 2 5VDC Max2.4A
ALWAYS ON
A.
C.
B.
D.

Introducon
With one independent control outlet, plus one always on outlet and one always on USB ports,
you can easily control lights and home electric devices plugged into the controlled outlet via
YoLink App on your iOS or Android devices, as well as popular voice assistants and 3rd-party
automaon apps such as IFTTT.
2
WH IT E
HO T
Live Wire
Ground Wire
Neutral Wire
Mounng Hole
Mounng Hole
POWER Buon
Press once to turn on or
off the outlet
Outlet 1 (Controlled)
Plug in your device and
control it independently
from your smartphone
CONTROLLED
CLASS 2 5VDC Max2.4A
ALWAYS ON
Outlet 2 (Always On)
Plug in your device and
cannot be controlled
USB Port
Charge your smartphone,
tablet or other USB-powered
device (5V DC, Maximum 2.4A).
USB outlets are always on
Plate
Status LED

The LED light indicates the current status of the outlet:
CONTROLLED
CLASS 2 5VDC Max2.4A
ALWAYS ON
Green
Outlet is On (Not on when the outlet is Off)
Blinking Green
Connecng to Cloud
Fast Blinking Green
Establishing Connecon with YoLink System
Slow Blinking Green
Updang
Irregular Blinking Green
Removing Connecon to YoLink System
Irregular Slow Blinking Green
Restoring to Factory Defaults
3

Set Up
Set Up - First-Time YoLink Users (Exisng users proceed to Add Device, next page)
* Ge t re ad y: your I n- wa ll O ut letTo set up an d us e , yo u will need a n Ap pl e iPho ne or tablet that i s iOS 9.0 o r high er, or an A nd ro id p ho ne or
tab let th at i s Android 4.4 o r hi gh er
Follow the steps below to set up your In-wall Outlet via the YoLink app
Download YoLink app through Apple App Store or Google Play Store
Log in or create a new account if required
Download, and log
in to YoLink app
1
* Make sure your hub is connected to the
internet (green LED indicator is
blinking, blue LED indicator is
always on)
Power
Adapter
Hub
SET
Set up YoLink Hub
2
YoLink Hub is required to set up your . Please set up your YoLink Hub firstIn-wall Outlet (refer
to YoLink Hub manual)
* Ethernet patch cable (included) to your network
(router, switch, etc.), recommended, but oponal.
Otherwise connect your Hub to your home Wi-Fi
network. Refer to the Hub set up manual for more
informaon:
YS1603-UC_User Guide 4

Add Device
Turn on power the Status LED aer installaon (refer to Installaon secon on next page),
will blink green several mes . The green LED indicates the device is online and ready to use
Tap “ ” buon, then scan QR Code on the device
5
Turn on power
aer installaon
Tap “ ” buon
to add devices
12
* If the outlet is powering on, press the POWER
buon once, the Status LED will blink green , your
device is ready to use
CONTROLLED
CLASS 2 5VDC Max2.4A
ALWAYS ON

Installaon
If you are not comfortable working with 120V electrical wiring, please consult or hire a qualified
electrician. Turn off circuit(s) at the breaker or fuse panel, and confirm there is no voltage in the
box before starng the installaon (there may be mulple live circuits within the switch box).
Failure to use best electrical safety pracces can result in injury or death! All wiring connecons
must be made aer the power is turned off to avoid personal injury and/or damage to the outlet
In-wall Outlet is designed and intended for indoor use only!
Total 15 amp maximum current. (Refer to the equipment or light bulb/fixture specificaons if in
doubt)
Outlet is designed and intended only for permanently installed fixtures, and in accordance
with the naonal and local electrical codes and regulaons of the United States or Canada, as
applicable
IMPORTANT SAFETY NOTICE!
6

7
Get Ready Begin Installaon:
Turn off circuit(s) at the breaker or fuse
panel, and confirm there is no voltage in
the box before starng the installaon
(there may be mulple live circuits
within the switch box)
Unscrew and remove the outlet plate;
then use a voltage tester to confirm the
circuit is dead
Exisng wall outlet (to be replaced) or
new box with wiring ready (neutral wire
required)
At least 2 inches of box depth is required
(2 1/8" deep boxes are typical)
Screwdriver (Phillips, recommended),
straight screwdriver, wire strippers and
voltage tester

8
Unscrew the outlet from the electrical
box and pull it out with the wires sll
aached
Three wires will be aached to the outlet: an
incoming hot wire, which is black; a typically
neutral wire, which is white; and a typically
grounding wire, which is green or bare typically
copper. There may be other wires in the box,
but you should only be working with the wires
connected directly to the outlet
Compare your new outlet with the one
you’re replacing to find the corresponding
l o c a o n s fo r t h e e l e c t r i c a l s c re w
connectors
* If you must remove the exisng outlet, labeling the wires
first may be helpful
Since the power is off, you can match the
connector in a simple way: do not disconnect
all wires at once, otherwise it may cause
confusion, but unscrew and connect one wire
at a me
Hot Wire
(Typically Black)
Ground
(Typically Green or Bare Copper)
Neutral Wire
(Typically White)

9
C o n n e c t th e first w ir e yo u u n s c r e w to th e as s o c i ate d sc re w t e r mi n al o n t h e In - wa l l
O u t l e t ; d o th e sa m e fo r th e re m a i n i n g t wo w i re s
Before co nn ec n g th e wi re to th e ter mi na l , e n su re th ere i s ab ou t 1/ 2 in ch o f bare w ire v i s i bl e (st ri p off
in s u l a o n a s nee de d)
Insert the wire into the terminal
Tighten the screw terminal
Gently tug on the wire to ensure a ght connecon
WH I T E
HO T
Hot/Live
Neutral
Ground
Insert the associated
(hot, neutral, Ground)
wires
1/2 inch
Tighten the screw
WHI T E
HOT

B.
10
Gently push the new, wired outlet back
into the electrical box and screw it in
place
Snap on the outlet plate and screw it,
turn on the power at the circuit breaker
Snap on the plate and screw it
Turn on the power
Secure the outlet
to the box with
two screws
Push outlet and wiring
into the electrical box
CONTROLLED
CLASS 2 5VDC Max2.4A
ALWAYS ON
Hot/Live
Ground
Neutral
C.

11
Using the YoLink App
Device page
Timer
Set the one-me-mer duraon for
the outlet (refer to page 13)
Connecon status
of outlet and Hub
Details
* Tap to go to Details page
(refer to page 12)
Device name
* Edit name on Details page
Real-me status:
Turned on or turned off
Schedule
Create on/off schedules to automate
your (refer to page )outlet 14
* Tap to turn on/off the outlet
* Outlet is turned off

12
Details page
Device me
* Tap to sync with mobile
Device SN (unique)
Connecon status
of outlet and Hub
Firmware version
* ” indicates a “#### ready now
new update is available (refer
to page )24
Device status
* Turned on or turned off
* Tap to delete the device from
your YoLink account
Add / remove
from favorites
Device type
Choose a room
for device
Device EUI (unique)
Device history
Outlet turned on or
turned off, logged
with date & me
Rename the device
Device model
Power on status
aer an update
or power loss
Switch Last State or
Off or On
* Default is set to Last State

13
Timer
With YoLink app, you can set up a mer to turn on or/and off the outlet
Note
One mer will run only once. You can set a new mer aer the mer has already run or once you
cancel it
Aer seng up, the mer is running at device without internet
Tap “ ” buon
to enable or disable
the mer
* Choose acon from “on”,
“off ”, or “on then off ”
Tap to save the sengs
Set the mer duraon
in Hours and Minutes

Schedule
Create on/off schedules to automate your outlet to work around your home and work schedules
Note
You can have a maximum 6 schedules at one me
You may add as many schedules as you want in Automaon sengs. Automaon sengs are saved
in the cloud
Aer seng up, the schedule is running at device without internet
14
Tap to save the sengs
Tap “ ” buon
to enable or disable
the schedule
* Click to edit the schedule.
Swipe le to edit or delete the
schedule
Tap to add a
schedule
Set repeang frequency
* Pick at least one day
Set the preferred state
“on”,”off ” or “on then off ”
Set the schedule me

Scene
Set one-click control for mulple devices in your YoLink app. You can only run a scene via your
YoLink app
Go to “Smart ”, tap “Scene” followed by the “ ” icon to add a scene
Fill in details followed by the “ ” icon
Tap to add an scene
* There are pre-set four scenes,
You can choose to either edit
or delete each of them
Tap “ ” buon
to enable or disable
the scene
* Click to edit the scene.
Swipe le to edit or delete
the scene
Add / remove
from favorites
Edit behavior
* You must have at least one
acon device, or you cannot set
a behavior.
you will be able to include one or
more devices in this scene, and
define their acons and/or states
Edit name
for the scene
Tap to save the sengs
Select an icon
for the scene
15

Automaon
Easily set up rules for “if this then do that” funcons
Go to “Smart ”, tap “Automaon” followed by the “ ” icon to add an automaon
Fill in details followed by the “ ” icon
16
Edit trigger
Edit behavior
* You must have at least one
acon device, or you cannot set
a behavior
Edit when
* Set a me range for the
automaon (always or during
specific days / mes)
Tap to add an
automaon
Tap “ ” buon
to enable or disable
the automaon
* Click to edit the automaon.
Swipe le to view the history
logs and to edit or delete the
automaon
Edit name
for the automaon
Tap to save the sengs
* In-wall Outlet can be set as
a trigger or acon device

Voice Assistants
Go to Sengs > Voice Assistants for the applicable voice assistant integraon guide
Tap “ ” in the upper le corner to go to My Profile
Connect YoLink with third-party voice assistants ser vice to control or monitor the status of
your devices through voice commands
* In-wall Outlet is integrated with Alexa and Google Assistant, and is also integrated with IFTTT .com, works as acon devices using IFTTT
17

About YoLink Control
YoLink Control is our unique device-to-device control technology. Using YoLink Control, YoLink
devices can be controlled without the Hub or an internet connecon. (Use of YoLink Control is
oponal; you can use the Automaon feature in the app OR use YoLink Control, but YoLink
Control offers the benefit of operaon without the Hub or internet connecon.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Door
Sensor or In-wall Outlet, while examples of a responder are another In-wall Outlet or a YoLink Plug
Mini
To config u re your I n -wa l l as a co ntro ller, Tu r n on th e usin g POW E R buon Outlet outlet
or via Yo Link ap p (ve r i fy th e Status L ED of I n -wa l l disp l ays gree n ) . Pre ss and h old Outlet
the POWER b uo n for 5- 1 0 seconds u n l th e LED q uickly b l inks green
Upon pairing, the LED will stop blinking (this may happen aer only blinking two or three mes)
To configure a as the responder n on the plug using YoLink Plug Mini . Tur POWER buon or
via YoLink app Mini (verify the Status LED of YoLink Plug displays blue). Press and hold the
POWER buon for 5-10 seconds unl the LED quickly blinks blue
Pairing
18