Yolink Plug Mini YS6604-UC User manual

User Guide
YoLink Plug Mini YS6604-UC
REV 1.0

Contents
Introduction··············································· 1
Product Requirements·································· 2
Features··················································· 2
Set Up YoLink Plug Mini································· 3
Using YoLink App with Mini·············· 4YoLink Plug
YoLink Control·············································8
Specifications············································13
Maintaining the YoLink Plug Mini·····················11

Introduction
YoLink Plug Mini turns a typical electrical wall outlet into a multi-function smart outlet. You
can easily control lights and home electric devices via YoLink App on your iOS or Android
device.
1
Power Button
Plug in your device and
control it via YoLink App
Blue
The plug mini is on.
Red
The plug mini is off.
Blinking Blue
Connecting to cloud.
Fast Blinking Blue
Set up connection with devices.
Fast Blinking Red
Remove connection with devices.
Blinking Red and Blue
Factory resetting.
Slow Blinking Blue
Updating.

Features
Control from anywhere - Control your YoLink plug mini remotely via YoLink App on your
iOS or Android device.
YoLink Control - , turn on or off ini No internet is required your YoLink plug m when you
set up your plug with a YoLink controller.
2
Timer & Schedule - Automatically turn on or off household appliance after or at a certain time.
Scene - One click control. scene button to automatically turn on or off your Tap the
YoLink plug minis and action of other devices.
Automation - Set up rules for “If this then that” function.
Voice Control - Use Alexa or Google Assistant to control your devices with voice commands.
Product Requirements
1. A YoLink Hub.
2. A smartphone or tablet running iOS 9 or higher; Android 4.4 or higher.

Set Up YoLink Plug Mini
Follow the steps below to set up your YoLink plug mini via YoLink App.
Get the YoLink App from
Apple App Store or Google
Play.
Get Ready
Plug into an outlet and your
device is ready to go.
Tap the “ ” in YoLink App.
Scan the QR Code on the
QSG or the device.
Add To YoLink App Plug In and Enjoy
3

Using YoLink App with YoLink Plug Mini
Details
Name – Set a name for your YoLink Plug Mini.
Room – Choose a room for your YoLink Plug Mini.
Favorite – Click to add to/remove from Favorite.
You can enter a descriptive name, set the room, add to/remove from favorite, check
device history.
Tap the Plug Mini's icon in App to go to its
controls.
Tap the Details icon at the top-right.
Tap the icon for each of the settings you want to
personalize.
History – Check history log for the Plug Mini.
Delete – T h e device will be r e m o v e d f r o m your
account a n d YoL i n k A p p .
4

Timer
With YoLink App, you can set up a timer to turn on or/and off your Plug Mini.
Tap the Plug Mini's icon in App to go to its controls.
Tap “Timer” for timer setting.
Choose action from “ON”, “OFF”, or “ON then OFF”.
Set the timer duration in Hours and Minutes.
Tap “Save”.
Note
One timer will run only once. You can set a new
timer after the timer has already run or once
you cancel it.
The Timer here is running at device without internet.
5

Schedule
You can create ON/OFF schedules to automate your plugged-in devices to work around
your home and work schedules.
Tap Plug Mini's icon in App to go to its controls.
Within the Add Schedule screen, set the time,
your preferred state (“ON”,”OFF” or “ON then
OFF”) for the connected device, and repeating
frequency.
Tap “Save”.
Note
Tap “Schedule” to open the Schedule screen,
tap “ ” to add a new schedule.
Activate or deactivate the schedule at schedule
screen.
Swipe down each schedule to edit or delete it.
You can keep maximum 6 schedules at one time.
The schedule here is running at device without
internet.
You may try to add schedule at Automation
where you can add as many as you want. The
automation setting is saved in cloud.
6

Set one-click control for multiple devices in your YoLink App. You can run a scene via your
YoLink App or a YoLink Remote.
Note
Scene
Tap “Smart” and switch to Smart screen.
Tap “ ” to create your own scene.
To set a scene, you will need to select one or
more devices to be controlled, and then define
their actions and/or states.
To execute a scene, you may tap any scene at
“Smart” or “Favorite” when you mark it as favorite.
Swipe down each scene to edit or delete it.
You must have at least one YoLink Hub and a
YoLink Device in order to create a scene.
7

YoLink Control is our unique “device to device” control technology. Under YoLink Control,
the devices could be controlled without internet or Hub.
YoLink Control
You will need to physically set it up.
Devices which send out command is called controller(Master). Devices which receive
command and act accordingly is called responder(Slave).
Power Button
8

Find a plug mini as controller(Master). Hold the set button for 5-10 seconds, the lights
will flash blue quickly.
After pairing is done, the light will stop flashing.
Find another action device as responder(Slave). Hold the set button for 5-10 seconds, the
device will enter pairing mode.
When the plug mini is detected to be turned on, the action device will be turned on as well.
Pairing
9
Find a controller(Master) plug mini . Hold the set button for 10-15 seconds, the lights will
flash red quickly.
The above two devices will unpair by themselves and after unpairing is done, the light will
stop flashing.
Unpairing
When the plug mini is detected to be turned on, the action device will no longer turned on.
Find a responder(Slave) action device. Hold the set button for 10-15 seconds, the
device will enter unpairing mode.

Automation allows you to set up IFTTT rules so the devices could act automatically.
Automation
Tap “Smart” to switch to Smart screen and tap
“Automation”.
To set an Automation, you will need to set a
trigger time, local weather condition, or choose
a device with certain stage as a triggered
condition. Then set one or more devices, scenes
to be executed.
Tap “ ” to create an automation.
10

Maintaining the YoLink Plug Mini
Firmware Update
To keep the YoLink Plug Mini working well and enjoy all the latest improvement and fixes,
we recommend that you update the firmware when an update is available.
Tap the Plug Mini's icon in App to go to its controls.
Tap the Details icon at the top-right.
Tap “Update”.
Note
The light will be slowly blinking blue during
update and stop blinking when update is done.
Only the YoLink Plug Mini that is currently
reachable and has an available update will be
shown in the Details screen.
11

Factory Reset
Factory reset will erase all your settings and bring it back to default. This will not unlink the
device from your account, which you will have to do so through APP if needed.
H old the power button for 20 seconds until the LED blinks red and blue.
Factory reset will be done when the light stops flashing.
Power Button
12

Specifications
Button: Power Button
Maximum Current: 10A (Resistive)
Environment: -20°C ~ 45°C (Humidity ≤80%)
Input: 100-120V~, 60Hz
13

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio c ommunications. However, there i s no guara ntee that inte rference w ill not o ccur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
FCC Statement
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
2) This device must accept any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC RF Radiation Exposure Statement
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile
Configurations. The antennas used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.”