DAKtel DT-7X User manual
www.daktelasia.com
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
1
•
•DECT HANDSET
•
•
•
•
•
•
•
•
•
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
4
once the connection is successful.
4.
instructions.
should appear on the screen left side. The cellular antenna indication on the screen right side.
2. Select WLAN setting and press Menu/ok
3. Select ON and press Menu/ok
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
•For landline connection
• To call another terminal or terminals registration mode
•
• For power adapter connection
•
GREEN
BLUE
WHITE
RED
5
Sim Card
Slot
PSTN
Line
Power
Adapter
On/Off
Speaker SOS Handset
Charging Point
Page /
3. Cellular connection
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
To choose an action press the MENU/OK button.
Speaker
SOS
Speaker
Menu / Ok
Pause
Microphone
Use this function to unregister handset/s or Communicator/s (when going inside the deleted items,
to the base.
Note: First you need to select which PP you wish to modify. Then press MENU/OK to select and
confirm, you may move with up and down and select with MENU/OK. For final confirmation use
again the MENU/OK button.
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
To choose an action press the MENU/OK button.
Use this function to unregister handset/s or Communicator/s (when going inside the deleted items,
to the base.
Note: First you need to select which PP you wish to modify. Then press MENU/OK to select and
confirm, you may move with up and down and select with MENU/OK. For final confirmation use
again the MENU/OK button.
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
•
Press MENU/OK to enter SOS Number.
MENU/OK.
pressed for at least 5 seconds till the SOS call is cancelled.
Periodic check is under the main SOS feature.
2. Select ON and press menu/ok
1. Under the SOS menu, go to SMS alert and press menu/ok.
sent too.
Please contact us for additional info.
Please contact us for additional info.
requesting to enter a 4 digits code! Once a correct 4 digits code is inserted, the line will be open to
9999!
For additional Communicator registration, press one time on Communicator SOS button. A
handset will.
To check handset / Communicator registration to base, press one time on base PAGE button, the
handset/s and or Communicator/s which are registered to the base should start ringing. To cancel,
press again on the base PAGE button or on the communicator SOS button or handset end button.
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
9
•
Press MENU/OK to enter SOS Number.
MENU/OK.
pressed for at least 5 seconds till the SOS call is cancelled.
Periodic check is under the main SOS feature.
2. Select ON and press menu/ok
1. Under the SOS menu, go to SMS alert and press menu/ok.
sent too.
Please contact us for additional info.
Please contact us for additional info.
requesting to enter a 4 digits code! Once a correct 4 digits code is inserted, the line will be open to
9999!
For additional Communicator registration, press one time on Communicator SOS button. A
handset will.
To check handset / Communicator registration to base, press one time on base PAGE button, the
handset/s and or Communicator/s which are registered to the base should start ringing. To cancel,
press again on the base PAGE button or on the communicator SOS button or handset end button.
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
•
Press MENU/OK to enter SOS Number.
MENU/OK.
pressed for at least 5 seconds till the SOS call is cancelled.
Periodic check is under the main SOS feature.
2. Select ON and press menu/ok
1. Under the SOS menu, go to SMS alert and press menu/ok.
sent too.
Please contact us for additional info.
Please contact us for additional info.
requesting to enter a 4 digits code! Once a correct 4 digits code is inserted, the line will be open to
9999!
For additional Communicator registration, press one time on Communicator SOS button. A
handset will.
To check handset / Communicator registration to base, press one time on base PAGE button, the
handset/s and or Communicator/s which are registered to the base should start ringing. To cancel,
press again on the base PAGE button or on the communicator SOS button or handset end button.
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
11
•
Press MENU/OK to enter SOS Number.
MENU/OK.
pressed for at least 5 seconds till the SOS call is cancelled.
Periodic check is under the main SOS feature.
2. Select ON and press menu/ok
1. Under the SOS menu, go to SMS alert and press menu/ok.
sent too.
Please contact us for additional info.
Please contact us for additional info.
requesting to enter a 4 digits code! Once a correct 4 digits code is inserted, the line will be open to
9999!
For additional Communicator registration, press one time on Communicator SOS button. A
handset will.
To check handset / Communicator registration to base, press one time on base PAGE button, the
handset/s and or Communicator/s which are registered to the base should start ringing. To cancel,
press again on the base PAGE button or on the communicator SOS button or handset end button.
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
12
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
13
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
14
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
checking.
15
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
After selecting, press one time on the Pull
Cord SOS button
Successful registration will follow with a
After selecting, press one time on the
Wristband SOS button.
Successful registration will follow with a
After selecting, press one time on the Fall
Detector SOS button.
Successful registration will follow with a
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
After selecting new registration, press
separate between the 2 parts. Successful
registration will follow with a connection
Then select registration and replace the
registration will follow with a connection
After selecting new registration, press one
time on the smoke button. Successful
registration will follow with a connection
Make sure that the bed sensor was not
touch at least 5min before! Then After
selecting new registration, press 1 time on
the bed sensor. Successful registration will
follow with a connection sound from the
After selecting new registration, press one
time on the gas button. Successful
registration will follow with a connection
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
Single press on the same PAGE button and then follow the same as registration procedure (for
•
•
•
•
•
•
•
•
1. press the SOS button.
2. press the SOS button or automatic SOS if fall down.
3. press the SOS button.
•
•
starts.
•
•
•
now presses
##, then press
speakerphone mode.
hearing issues.
You can make a conference call using 1 external line and 2 internal lines. When a call has been
press * button on the handset the 3 parties are in conference.
1.
2.
3.
4.
4.1
4.2
4.3
4.4
4.5
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
now presses
##, then press
speakerphone mode.
hearing issues.
You can make a conference call using 1 external line and 2 internal lines. When a call has been
press * button on the handset the 3 parties are in conference.
1.
2.
3.
4.
4.1
4.2
4.3
4.4
4.5
Up to 5 alarm Communicators can be registered to the 4G / DECT base.
2. Single press on the DECT communicator SOS button.
3. At this stage registration sound will be heard from the communicator (the blue LED on the side
1. Single or long press on the front SOS button to trigger the alarm.
2.
2. Select PP Setup and press menu/ok.
4. (PP) Communicator menu:
19
internal call.
1.
1.1 Flash when the communicator registers to a base but not operational.
1.3 OFF when register to a base and operational.
2.
3.
3.1 Lighted when a communicator replaced on the charger.
•
•
•
•
•
•
•
•
Other manuals for DT-7X
1
Table of contents
Other DAKtel Home Automation manuals
