Switchbot Curtain rod 2 User manual

www.switch-bot.com文件名称: Curtain R- SMS-EN-2112材质和工艺：封面 157g铜板内页 128g铜版纸，骑马钉版本号: V4.4-2112设计师：ZBH成品尺寸：83mm X 110mm完成时间：2021/12/21更改内容：备注：此页从虚线下开始印刷，表格不印刷、红色线框不做印刷增加锁扣配件，修改部分安装示意图，删减部分文案。V4.4-2112User Manual

Curtain Rod 2

※ Please read this user manual carefully before using

the device.

1. Package Contents ------------------------------------------------ 02

2. Name of Parts ---------------------------------------------------- 03

3. Preparation ------------------------------------------------------- 04

4. Installation -------------------------------------------------------- 06

5. Control -------------------------------------------------------------- 23

6. Settings ------------------------------------------------------------- 26

7. Charging, Firmware and Factory Reset ----------------- 27

8. Specifications ---------------------------------------------------- 29

9. Return and Refund Policy ------------------------------------ 31

10. Contact and Support ----------------------------------------- 31

Contents

Visit support.switch-bot.com for more support.

Name of Parts

Package Contents

Hook Arm (Rod 2)

Hook Button

Hook

Reset Button

Type-C Charging Port

Indicator Light &

Light Sensor

Motor

Type-C CableMain Body Hook Pair (Rod 2)

Beads Fixer (beads installed) Clip

Preparation

• A smartphone or tablet with Bluetooth 4.2 or above.

• Download the SwitchBot app on App Store or Google

Play Store.

• Open the SwitchBot app and register for a SwitchBot

account or sign in directly if you have an account.

• Fully charge your SwitchBot Curtain.

• (Optional) If you intend to use Cloud Services, you need

to set up a SwitchBot Hub Mini (sold separately) and

connect your phone to the internet.

Check your Curtain Track

SwitchBot Curtain Rod 2 supports curtain track with the

following measurements:

If SwitchBot Curtain Rod 2 does not work on your

curtain track, please contact:

[email protected]

Diameter:

15.0 mm to 40.0 mm

iOS 11.0+Android 5.0+

Installation

Step 2: Install on your Curtain Track

Stretchable Hook Arm

Step 1: Add SwitchBot Curtain in the App

Create a SwitchBot account or sign in from the app's

profile page. On the Home page, tap the top right +

sign, select the Curtain logo and follow the instructions

to add SwitchBot Curtain to your account.

① Close your curtain and remove the ﬁrst hook from it.② Pull the detached Hook and attach it between the ﬁrst and second ring onto your curtain rod.③ Put the main body (attached with the other Hook) onto the rod, pull down the Hook and install it on the main body, you will hear a click when it is ﬁrmly installed.④ Finish by adjusting the position of the SwitchBot Curtain to keep it perpendicular to the ground, make sure the logo faces indoor. Put SwitchBot Curtain behind your curtain. 1. Ring Top Curtains

④ Adjust the position of the SwitchBot Curtain to keep it perpendicular to the ground, make sure the logo faces indoor.③ Put the main body (attached with the other Hook) onto the rod, pull down the Hook and install it on the main body, you will hear a click when it is ﬁrmly installed.

1110

2. Grommet Curtains

① Install SwitchBot Curtain at the back of your curtain.② Pull the detached Hook and attach it between the ﬁrst and second grommet.

Close your curtain, attach a clip on the first tab.

Install the clips provided according to the pictures below

before you install SwitchBot Curtain.

3. Tab Top Curtains

Open

Attach towards this way

First tab

1312

⑤ Refer to the pictures below, install the beads fixer at

the top of the grommet (with beads installed in it), make

sure that you clip it on the grommet firmly. Finish by

cutting the remaining beads or put it behind your curtain.

Attach the remaining clips on other tabs as shown on the

picture.

Beware that all other clips should be attached the opposite

way against the first clip, make sure all the clips are sitting

on the top of the rod and are aligned with each other.

First tab

The opposite way

First clip

Clip tail aligned

with clip head ② Pull the detached Hook and attach it between the ﬁrst and second tab onto your curtain rod.① Install SwitchBot Curtain at the back of your curtain.

1514

③ Put the main body (attached with the other Hook) onto the rod, pull down the Hook and install it on the main body, you will hear a click when it is ﬁrmly installed.④ Finish by adjusting the position of the SwitchBot Curtain to keep it perpendicular to the ground, make sure the logo faces indoor.4. Back Tab Curtains

Open

Close your curtain, attach a clip on the first tab.

First tab

Attach towards this way

Install the clips provided according to the pictures below

before you install SwitchBot Curtain.

1 617