York Fitness T800 Plus User manual

A

2
Thank you
Thanks for purchasing this product. The product will help you exercise your muscles in
the correct way and to improve your fitness – and all this in a familiar environment.
Implied Warranty
The importer of this machine assures that this device was manufactured from high quality
materials.
Prerequisite for the implied warranty is the proper setup in accordance with the operating
instructions. Improper use and /or incorrect transportation can render the warranty void.
The implied warranty is for 1 year, eginning with the date of purchase. If the device you
acquired is defective, please contact our Customer Service (Inset page) within the
guarantee period of 12 months as of purchase date. The warranty applies to the following
parts (as far as included in the scope of delivery): Frame, ca le, electronic devices, foam,
and wheels. The guarantee does not cover:
1. Damage affected y outer force
2. Intervention y unauthorized parties
3. Incorrect handling of the product
4. Non-compliance of the operating instructions
Wear parts and expenda le items are also not covered (such as running elt).
The device is only intended for private use. The warranty does not apply to professional
usage.
Spare parts can e ordered from Customer Services (Inset page) as needed.
Please make sure you have the following information on hand when ordering spare parts.
1. Operating instructions
2. Model num er (located on the cover sheet of these instructions)
3. Description of attachments
4. Attachment num er
5. Proof of purchase with purchase date
Please do not send the device to our firm without eing requested to do so y our Service
team. The costs of unsolicited shipments will e orne y the sender.
General safety instructions
A great deal of emphasis was placed on safety in the design and manufacture of this
fitness device. Still, it is very important that you strictly adhere to the following safety
instructions. We cannot e held lia le for accidents that were caused due to disregard.

3
To ensure your safety and to avoid accidents, please read through the operating
instructions thoroughly and attentively efore you use the sports device for the first time.
1) Consult your GP efore starting to exercise on this device. Should you want to exercise
regularly and intensively, the approval of your GP would e advisa le. This is especially
true for users with health pro lems.
2) We recommend that handicapped people should only use the device when a qualified
care is present.
3) When using the fitness device, wear comforta le clothing and prefera ly sports or
aero ic shoes. Avoid wearing loose clothing which could get caught in the moving parts of
the device.
4) Stop exercising immediately should you feel unwell or if you feel pain in your joints or
muscles. In particular, keep an eye on how your ody is responding to the exercise
program. Dizziness is a sign that you are exercising too intensively with the device. At the
first signs of dizziness, lay down on the ground until you feel etter.
5) Ensure there are no children near y when you are exercising on the device. In addition,
the device should e stowed in a place that children or house pets cannot reach.
6) Ensure that only one person at a time uses the fitness device.
7) After the sports device has een set up according to operating instructions, make sure
all screws, olts and nuts are correctly fitted and tightened. Use only attachments
recommended and/or supplied y the importer.
8) Do not use a device that is damaged or unservicea le.
9) Always place the device on a smooth, clean and sturdy surface. Never use near water
and make sure there are no pointed o jects in the direct vicinity of the fitness device. If
necessary, place a protective mat (not included in scope of delivery) to protect your floor
underneath the device and keep a free space of at least 0.5 m around the device for
safety reasons.
10) Take care not to put your arms and legs near moving parts. Do not place any material
in openings in the device.
11) Use the device only for the purposes descri ed in these operating instructions. Use
only attachments recommended y the manufacturer.
12) If the supply cord is damaged, it must e replaced y the manufacturer, its service
agent or similarly persons in order to avoid a hazard.

4
Special Safety recautions
● ower source:
●Choose a place in reach of a socket when placing the treadmill.
●Always connect the appliance to a socket with a grounded circuit and no other
appliances connected to it. It is recommended not to use any extension cords.
●A faulty grounding of the appliance can cause the risk of electrical shocks. Ask a
qualified electrician to check the socket in case you do not know if the appliance is
grounded appropriately. do not modify the plug provided with the appliance if it is not
compati le with your socket. ask a qualified electrician to install a suita le socket.
●Sudden voltage fluctuations can seriously damage the treadmill. Weather changes or
switching on and off other appliances can cause peak voltages, over-voltage or
interference voltage. To limit the danger of damage to the treadmill, it should e equipped
with an over-voltage protective device (not included).
●Keep power cord away from the carrying roller. Do not leave the power cord elow the
striding elt. Do not use the treadmill with a damaged or worn out power cord.
●Unplug efore cleaning or engaging in maintenance work. Maintenance should only e
done y authorized service technicians, unless otherwise stated y the manufacturer.
Ignoring those instructions would automatically void the warranty.
●Inspect the treadmill efore every use to make sure that every part is operational.
●Do not use the treadmill outdoors, in a garage or under any kind of canopy. Do not
expose the treadmill to high humidity or direct sunlight.
●Never leave the treadmill unattended.
Make sure the striding elt is always tense. Start the striding elt efore stepping on it.
If the
supply
cord is
damaged,
it must
be
replaced
by
the manufacturer, its
service
agent
or
similarly
qualified
persons
in order to avoid a hazard.
This appliance is not intended for use by persons (including children with
reduced physical, sensory or mental copaiba if the supply cord is damaged,
it must be replaced by the manufacturer, its service
Children should
be
supervised
to ensure that
they
do not
play
with the
appliance

5
Assembly
●Before starting with the assem ly of this fitness device carefully read through the set up
steps as of page 8. We also recommend that you view the assem ly drawing prior to
assem ly.
● Remove all packaging material and place the individual parts on a free surface. This will
provide you with an overview and will simplify assem ly.
● Please consider that there is always the risk of injury when using tools and carrying out
technical activities. Please proceed with care when assem ling the device.
●Make sure you have a hazard-free working environment and do not, for example, leave
tools lying around. Deposit the packaging material in such a way that it does not pose a
danger. Foil/plastic ags are a potential risk of suffocation for children!
●Take your time when viewing the drawings and then assem le the device according to
the series of illustrations.
●The device must e carefully assem led y an adult person. If necessary, request aid
from another technically talented person.

6
Unpacking & Assembly
WARNING: Use extreme caution when assem ling this treadmill. Failure to do so could
result in injury.
NOTE: Each step num er in the assem ly instructions tells you what you will e doing.
Read and understand all instructions thoroughly efore assem ling the treadmill.
UN ACK AND VERIFY THE CONTENTS OF THE BOX:
● Lift up and remove the ox that surrounds the Treadmill.
● Check the following items are present. If any of the parts are missing, contact with the
dealer.

7
Silicon ottler
Safety key Manual
Main body Hardware pack
Console A Console B

8
Running belt
Side rail Incline motor
Running deck
Rear cover
Motor belt
Front roller
Rear roller
Main parts
Motor cover Monitor Motor

9
Hardware bag
Allen C.K.S. full thread screw×6 （ M8*15 ）
T shaped wretch 1pcs
Allen C.K.S. full thread screw ×4 M6×25
Allen C.K.S half thread screw*2pcs (M8*50*20)
T shaped range S5 1pcs
L Allen wrenchS6 1pcs

10
Treadmill instruction
Console
Upright post
Handle ar
Safety key
Motor cover
Running elt
Side rail
Rear cover
Incline frame
Base frame
Main frame

11
Technical information
*WE RESERVE THE RIGHT TO AMEND THE PRODUCT WITHOUT PRIOR NOTICE.
Dimension Unfold :1090*750*1380
Fold : 1615*750*1380
Running board 1250*440mm
S eed 1.0－16.0km/h

12
Step 1: Take out the machine from ox and put it on the flat floor. (As shown)
Step 2: Insert the upright post into clamping ring on the oth side of the main frame with Allen C.K.S.
half thread screw M8*50*20 and Allen C.K.S. full thread screw M8*15 (without lock now).
ASSEMBLY INSTRUCTIONS

13
Step 3: Put the handle ar in a horizontal line (as the direction of the figures), then connect the console
B and upright post with 4 pcs of Allen C.K.S. full thread screw M8*15. (Lock the olts)
Step4 ： Put the Cnsole A on the treadmill,and connect all the wires well, use the Allen C.K.S. full
thread screw M6*25 to tighten the console.

14
Step 5: Fix the screws by tools, and then finished.

15
SETTING U YOUR TREADMILL
LACEMENT IN YOUR HOME
To make exercise a desira le daily activity for you, the treadmill should e placed in a
comforta le and convenient setting. This treadmill is designed to use minimal floor space
and to go nicely in your home.
Do not place the treadmill outdoors.
Do not place the treadmill near water or in high moisture content environment.
Make sure power cord is not in the path of heavy traffic.
If your room is carpeted, check the clearance to make sure there is enough space
etween the carpet fi er and the treadmill deck. If you are uncertain, it is est to
place a mat eneath your treadmill.
Locate the treadmill at least 4 feet from walls or furniture.
Allow a safety area of 2m X 1m ehind the treadmill so that you can easily get on and
off the treadmill without getting trapped during an emergency.
Occasionally after extended use you will find a fine lack dust elow your treadmill. This is
normal wear and DOES NOT mean there is anything wrong with your treadmill. This dust
can e easily removed with a vacuum cleaner. If you wish to prevent this dust from getting
on your floor or carpet, place a mat eneath your treadmill.
USE DEDICATED CIRCUIT
The outlet selected should e a dedicated circuit. It is particularly important that No
sensitive electrical equipment, such as computer or TV, share the same circuit.
CAUTION!
Make sure the running deck is level to the ground. If the deck is positioned on uneven
surface, it would cause premature damage to the electronic system.
Read this manual efore operating this treadmill.

16
GETTING STARTED
TURN OWER ON
Put the power cord into the electrical outlet with 10A. Flip this switch to the “ON” position.
The screen shines with prompt sound.
SAFETY KEY AND CLI
The safety key is designed to cut the main power to the treadmill should your fall.
Therefore, the safety key is designed to ring the treadmill to an immediate stop. At high
speeds, it may e uncomforta le and somewhat dangerous to come to a complete stop
immediately. So, use the safety key as emergency top only. To ring the treadmill to a
complete stop safely and comforta ly, use the red stop utton.
Your treadmill will not start unless the safety key is properly inserted into the key holder in
the middle of the console. The other end of the safety key should e securely clipped to
your clothing so that in the case that you fall, you will pull the safety key from the console,
which will stop the treadmill immediately to minimize injury. For your safety, never use the
treadmill without securing the safety key clipped to your clothing. Pull on the safety key
clip to make turn it will not come off your clothing.
GETTING ON AND OFF THE TREADMILL
Handle with care when getting on or off the treadmill. Try to use the handle ars while
getting on or off. While you are preparing to use the treadmill, do not stand on the running
elt. Straddle the running elt y placing your feet on oth side rails of the treadmill deck.
Place your foot on the elt only after the elt has egun to move at a consistent slow
speed.
During exercise, keep your ody and head facing forward at all times. Never attempt to
turn around on the treadmill when the running elt is still moving. When you have finished
exercising, stop the treadmill y pressing the red stop utton. Wait until the treadmill
comes to a complete stop efore attempting to get off the treadmill.
WARNING!
Never use this treadmill without first securing the safety tether clip to our clothing.
CAUTION!
For your safety, step onto the elt when the speed is no more than 3km/h.

17
FOLDING THE TREADMILL
1. Restore the incline to flat (0) position.
2. Unplug from power point efore folding.
3. Lift deck until it's parallel to the upright post and cylinder locks into position.
4. Caution: check to ensure cylinder locking device has engaged.
UNFOLDING THE TREADMILL
1. Place one hand on handle ar, use the other to push top of the running deck forward.
2. Press one foot on the middle section of the cylinder to disengage the locking
mechanism.
3. Allow deck to egin slowly dropping efore releasing hands.
MOVING THE TREADMILL
The treadmill can e moved around in house safely in its fold-up position y using the
transport wheels.
Firmly hold onto handle ars with oth hands, pull the treadmill towards you, then porta le
on wheels, drag or push slowly.
Transportation wheel
FLEXIBLE TUBE
Cylinder

18
Key Definition
LCD WINDOW
START KEY
QUICK SPEED KEY
PROGRAM KEY STOP KEY MODE key
SPEED”+“”-
QUICK SPEED KEY
INCLINE”+“”-“
start
pause
PAUSE
/

19
( Ⅰ
ⅠⅠ
Ⅰ ): Computer function Instruction:
1.1: P0: USER training program; P1-P36 the preset auto program; U01-U03: user-defined
program, FAT: ody fat function.
1.2: 7’’LCD display window
1.3: Speed Range: 1.0~16.0KM/H
1.4: Incline Range: 0~12%
1.5: Prevent over loading, over voltage, explosion proof, anti speed and electromagnetic
interference.
1.6: Self check and warning sound function.
1.7:MP3(Optional)
1.8:Bluetooth(Optional)
1.9:Fan(Optional)
( Ⅱ
ⅡⅡ
Ⅱ ): LCD window instruction:
2.1: “DISTANCE” window: Display the distance numerical value.
2.2: “CALORIES” window: Display the calories numerical value
2.3: “TIME” window: Display the time numerical value.
2.4: “SPEED” window: Display the speed numerical value.
2.5: “PULSE” window: Display the pulse numerical value
2.6:”INCLINE” window: Display the inclination numerical value.
The numerical range of each window:
TIME ： 0:00 – 99.59(MIN)
SPEED: 1.0 – 16.0(KM/H)
INCLINE: 0 – 12%
DISTANCE: 0.00 – 99.9(KM)
CALORIES: 0.0 – 999 (C)
( Ⅲ
ⅢⅢ
Ⅲ )Button instruction:
3.1: “PROG”: Program select key: when the treadmill is stopped, cycle select from the
manual program to “P1-P36 → U1~U3 → FAT”as you prefer. The default speed of manual
program is 1.0KM/H, the fastest speed is 16KM/H.
3.2: “MODE” : mode select key ： When the treadmill is stopped, set the Mode as you
prefer to.
You can cycle select the Time countdown → calories countdown → distance
countdown → Normal mode.
The reposition of default is 30 minutes when in P1-P36.
You can’t cycle select the FAT item when in FAT mode.

20
3.3:” START/PAUSE” key: When the treadmill is stopped, press the START key to turn on
the treadmill. Press “START” key when running, it will pause.
3.4: “STOP” key, when the treadmill is running, stop the treadmill slowly y pressing the
STOP key one times. When the LCD window show the ERR message.Press the stop key
to clear the err message. When the treadmill is running, press the “STOP” key for two
times, it can stops urgently.
3.5: “Speed +” KEY: increase the speed when running. Increase the parameter under the
ody fat testing.
3.6: “Speed –“KEY: decrease the speed when running. Decrease the parameter under the
ody fat testing.
3.7: “QUICK SPEED” key: when the treadmill is running, Speed up directly y pressing
the quick speed key3, 6, 12,16.
3.8: “Incline + “KEY: Increase the incline y pressing this key.
3.9: “Incline –“KEY: Decrease the incline y pressing this key.
3.10: “QUICK INCLINE KEY: Increase the incline directly y pressing the quick incline key
6, 9,12.
( Ⅵ
ⅥⅥ
Ⅵ ): Safety key function:
In any state, pull-out safety locks, window displays:”E7” and sound uzzer “DI-DI-DI”.
Then put well the safety lock, all show that the full light for 2 seconds, then go to manual
start mode (the equivalent of clearing reset).
( Ⅴ
ⅤⅤ
Ⅴ )Start instruction :
5.1: Put the power cord into the electrical outlet with 10A. Flip this switch to the “ON”
position. The screen shines with prompt sound.
5.2: Put the safety key on the correct position ,then turn on the power ,the LCD window
light is shinning ,and sound “ eee”, the treadmill enter in to the P0 Normal Mode.
5.3: Press “PROG” key to cycle select the program P0-P36,U01,U02,U03,FAT.
a) “P0” User program. Press “MODE” cycle select four training mode. User can select the
speed and inclination. Speed default is 1.0km/h, inclination default is 0%.
Training mode 1: Counting. Time, distance, calorie is plus. The select function is
closed.
Training mode 2: Time Countdown. Under selecting, time window flicker, press “+””-“to
modify the value. The range is 5-99 minute. Default is 30:00.
Training mode 3: Distance Countdown. Under selecting, Distance window flicker,
press “+””-“to modify the value. The range is1.0-99.0km. Default is1.0KM.