Youshiko YC9460 User manual

Youshiko YC9460 WiFi Weather Station
Technical Data and Features
Base station:
Perpetual Calendar Up to Year 2099
Day of week in 8 languages user selectable: English, German, Italian, French, Spanish, Dutch, Danish
andRussian
Time in optional 12 / 24 hour format.
Automatic calibration of network ( Internet ) time service
Barometric pressure:
— Air pressure data source network
— Pressure alternatively in hPa/mb or inHg or mmHg
Wind speed and direction:
—Wind speed and direction data source network
—Wind speed alternatively in km/h or Mph
Indoor humidity measurable range: 20%RH to 95%RH
Indoor temperature:
— Temperature measurement ranges:-20°C to 60°C or(-4°F to 140°F)
— Temperature alternatively in °C or °F.
Minimum/maximum display for humidity and temperature
Feels like temperature data source via internet.
The future weather forecast and temperature report function,weather forecast information provided by the
network
Connects directly to Wi-Fi network
Power Supply:
Battery: 2 x LR6 AA ( not included )
Mains adapter: DC5V 1.2A ( Included )
Wireless Outdoor Sensor:
— Outdoor temperature measurement ranges: -40°C (-4°F) ~ 70°C (158°F)
— Outdoor measurable range: 20%RH to 95%RH
— Data transmission frequency: 433 MHz
— Wireless range: max. 60 m (open area)
— Batteries: 2 x LR06 (UM-3), 1.5 V (size AA) ( not included )
— Protection class: IPX4

Base station Appearance:

Part A-Positive LCD
A1: Network Time icon
A2: Time
A3: Week for today A4: Calendar
A5: ALARM icon A6: WIFI icon
A7: Indoor Temperature
A8: Outdoor Temperature
A9: Indoor Humidity A10: Remote wireless channel
A11: Outdoor Humidity A12: Feels Like Temperature
A13: Barometric pressure
A14: Wind Direction
A15: Wind Speed
A16: Weather forecast for the next forth
days
A17: Week for the next forth days
A18: Minimum temperature forecast for the
next forth days
A19: Maximum temperature forecasts for
the next forth days
A20: Weather forecast for the next third
days
A21: Week for the next third days
A22: Minimum temperature forecast for the
next third days
A23: Maximum temperature forecasts for
the next third days
A24: Weather forecast for the next second
days
A25: Week for the next second days
A26: Minimum temperature forecast for the
next second days
A27: Maximum temperature forecasts for
the next second days
A28: Weather forecast for tomorrow
A29: Week for tomorrow
A30: Minimum temperature forecast for
tomorrow
A31: Maximum temperature forecast for
tomorrow
A32: Weather forecast for today
Part B – Back button and power
B1: “ ” touch field B2: “ ” and “ ” button
B3: “ ” button B4: “ ” button
B5: “ ” button
B6: “MEM” button
B7: Alarm on/off shift switch
B8: Battery compartment
B9: USB charger output socket
B10: Power supply socket
B11: Support frame

Part C –Wireless Outdoor Sensor:
C1: LCD display – Temperature
C2: LCD display – Humidity
C3: Transmit signal LED
C4: “°C/°F” button
C5: “TX” button
C6: Channel selector switch
C7: Battery compartment

Initial operation:
Insert required batteries observing polarity [ “+” and “–“ marks] in Wireless Outdoor Sensor , Select the
Channel no: 1or set the correct channel as per your requirement.
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, the
Wireless Outdoor Sensor began to switch tothe normal working mode,to detect the temperature and
humidity in the environment . At this time, the sensor will transmit wireless signaland with interval of about
1 minute, will automatically transmit the wireless signal, each transmitted wireless signal emission
sensor indicator will flash , when every time signal is generated by the sensor .
APP software for installing base station：
DOWNLOAD APP:
Hardware Requirements:
iPhone 4s (or above) enabled smart device
Software Requirements
iOS 7 (or above) or Android 4.3 (or above)
DownloadAPP (Weather Sense)
Download IOSAPP application software URL:
https://itunes.apple.com/cn/app/weathersense/id1273633929?mt=8
Download Android APP application software URL:
https://play.google.com/store/apps/details?id=com.emax.weahter
Or Simple search for WeatherSense App on your smart phone or other suitable device .

User registration：
After downloading the APP, open APP, Please register yourself with a valid email and password of your
choice, the program will jump out of a registration interface, Registration shown below, after registration is
completed ( You must activate your password in your mail Box / It may take time to receive the email in
your mailbox, so please wait ) and you must do the account activation.
Account login interface Account registraon interface Prompt mailbox account
acvaon
Weather station / Internet / APP Connection :
After registration and activation for the APP, login in to the appand thenthis will jump tothe Internet Wifi
router ( Your Wi-Fi network name ), then connect to the Internet Wifi router ( Your Wi-Fi network
name ) by entering WIFI login & password, jump the next interface according to NEXT ,
Please note:
If the base station is used for the first time, the base station will automatically enter the AP mode or
some time it may not / so press “ ” and the display will display AP.
If not for the first time use, the base station began to switch tothe normal working mode, to detect the
temperature, and humidity in the environment. At the same time, because the WIFI is not set up, the
network weather forecast information cannot be obtained, andthe air pressure, weather forecast and
temperature prediction have no content display. In this case, when the “ ” button is held down for more
than 3 seconds, the base station will automatically enter the AP mode.
Please insert the require battries in senser and connect your weather station main unit with supplied
power supply, all the symbols on the display screen will be displayed after about 3 seconds, wait for
one min , and weather station will go AP mode, If not then press for 3 seconds and weather station
will go AP mode and AP will show on display .

After confirming the base station enters the AP mode, click "NEXT" on the APP interface, And
according to the prompt click the prompt box, will automaticallyjump to the system's WI-FI settings, select
the WI-FI network "LivingSmart" and confirm the completion of the connection.
Please note: base unit picture showing in APP or in this user manual may be different to your
weather station
Then return to the APP interface and select the WIFI link named "LivingSmart" according to the APP
prompt.
Return to the APP interface, continue to click on "NEXT", to start the base station bonding, about a
few seconds later, if the match is successful, the APP interface will pop up the prompt box matching
success, at this time, hold down “ ” button of the base station for more than 3 seconds, let the base
station exit AP mode.
At the same time in APP click the prompt box, this will jump to the system's WI-FI settings again,
select the original WI-FI network .
After the APP interface is returned, APP will automatically set the location of the base station, and
show the main boundary after the success. At the same time, the base station is automatically connected
with the WIFI network , after the AP mode is exited. After the connection is successful, the base station
will automatically obtain the time, air pressure, weather forecast andtemperature prediction of the
network, and display it in the display screen. ( This can take few minutes ) .
Enter the WIFI hotspot
name and password
Prompts the device to
enter the AP mode
Prompt for the WIFi
hotspot named
LivingSmart
It is suggested that the
original WIFi hotspot
should be selected

The Base Station will now start to make a connection to the outdoor remote sensor. This operation takes
about 3 minutes and is displayed by a flashing reception RF antenna symbol “ ” in the “OUTDOOR”
display area on the receiver. the “OUTDOOR” display area will show an animation of the RF antenna
symbol, indicating the base station is searching for the signal from the outdoor sensor. At the same time
the base station began to establish WIFI connections (details see the following WIFI connection
description)
When the Base Station starts normal，Open the Base Station battery compartment cover ，Insert 2 x AA
batteries observing polarity [ “+” and “-” marks]，The battery is a backup power supply of the Base Station,
which can ensure the normal operation of the base station after the power adapter is unexpectedly cut off.
Note: after the power adapter is disconnected, the WIFI connection of the base station will be automatically
disconnected.
Outdoor sensor transmission:
When the Base Station successfully receives signals from the wireless sensor, the temperature and
humidity of the OUTDOOR are displayed on the OUTDOOR column of the Base Station.
The base station can connect up to 3 channel wireless sensor registration, the use of multiple wireless
sensor, the wireless sensor channel can not choose the same channel at the same time (a total of 1, 2, 3
channel can choose)
Press the " " button can switch the display of different channels of outdoor temperature and humidity,
when displaying the symbol " ", will display the channel every 5 seconds automatically switch a channel
If the Base Station failed to receive transmission from outdoor sensor (“- -”display on the LCD), press and
hold “ ” button for 3 seconds to receive transmission manually. the outdoor temperature will show an
animation of the RF antenna symbol，the Base Station will re receive the wireless signal of the outdoor
sensor.
Note: when the wireless sensor set up different channels, the base station "OUTDOOR" also want to switch
to the same channel. When there is no wireless sensor signal transmission on the channel, "--" will be
displayed in the channel of the base station
Manual time setting:
Press and hold down the “ ” button for 2 seconds, the temperature is display either in °C to flash. Now
use “ ” and “ ” buttons to set the temperature unit in °C or °F.
Press “ ” to confirm your setting, the barometric pressure is display either in hPa/mb to flash. Now use
“ ” and “ ” buttons to set the pressure unit in hPa/mb or inHg or mmHg.
Press “ ” to confirm your setting, the wind speed is display either in km/h to flash. Now use “ ” and “ ”
buttonsto set the pressure unit in km/h or Mph.
Press “ ” to confirm your setting, the 12/24 hour mode display starts to flash. Now use “ ” and “ ”
buttonsto set the correct 12/24 hour mode.

Press “ ” to confirm your setting, the Time zones start to flash, Now use “ ” and “ ” buttons set a
correct time zone (-12 to +12).
Press “ ” to confirm your setting, the Hour display starts to flash. Now use “ ” and “ ” buttons to set
the correct hour.
Press “ ” to confirm your setting, the Minute displays starts to flash. Now use “ ” and “ ” buttons to
set the correct minute.
Press “ ” button to confirm your setting, the Month and Date icon display starts to flash. Now use “ ”
and “ ” buttonsto set the date display on Month/Date or Date/Month.
Press “ ” button to confirm your setting, the Year display 2017 starts to flash. Now use “ ” and “ ”
buttonsto set the correct year.
Press “ ” button to confirm your setting, the Month display starts to flash. Now use “ ” and “ ” buttons
to set the correct month.
Press “ ” button to confirm your setting, the Date display starts to flash. Now use “ ” and “ ” buttons
to set the correct date.
Press “ ” button to confirm your setting, the language selection for the Weekday displays starts to flash.
Now use “ ” and “ ” buttons to select a language.
Language Sunday Monday Tuesday Wednesday Thursday Friday Saturday
English, EN SU MO TU WE TH FR SA
German, GE SO MO DI MI DO FR SA
French, FR DI LU MA ME JE VEN SA
Italian, IT DO LU MA ME GI VEN SA
Spanish, SP DO LU MA MI JU VIE SA
Dutch, DU ZO MA DI WO DO VRI ZA
Danish, DA SO MA TI ON TO FRE LO
Russian, RU BC ПН BT CP ЧТ ПТ СБ
Press “ ” to confirm your setting and to endthe setting procedures, enter the clock mode.
F.Y.I.:
After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal
Time Mode.
There are 8 languages of Weekday: English, German, Italian, French, Spanish, Dutch, Danish and
Russian
When the WIFI connection is successful, the time will be automatically updated to the network time, the
symbol “ ” will display, at the time of setting, time and time zones are notto change.
Setting the daily alarms:
Press once “ ” button, the display conversion to alarm activation mode. I
Press and hold down “ ” button for 2 seconds until Alarm Time hour display starts to flash. Use the“ ”

and “ ”buttons to set the required hour.
Press “ ” button to confirm your setting, the Minute display starts to flash. Use the “ ” and “ ” buttons
to set the required minute.
Press “ ” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “ ” and
“ ” buttons to set the minute of snooze you need.
Press “ ” button to confirm your setting andto end the setting procedure
F.Y.I.:
After 20 seconds without pressing any button the clock switches automatically from setting mode to
Normal clock mode.
The alarm for opening and closing
The alarm shift switch is pushed in the “ ” position, LCD display the “ ” icon, the alarm function is open,
at the same time, the sound of "BI" sounded.
Product back of the alarm shift switch is pushed in the “ ” position, the “ ” icon disappears, the alarm
function is close
F.Y.I.:
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal
is heard.
The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze
time unit is minutes.
Switching off the alarm signal
While the alarm is sounding, press any button except the “ ” button or touch the " " field for
more than 3 seconds to stop the alarm signal.
Snooze Function:
While the alarm is sounding, Touch the " " field once to activate the snooze function. The alarm
signal sounds again after already been set.
In snooze mode, press any button except the “ ” button or touch the " " field for more than 3
seconds to exit the snooze mode.
F.Y.I.:
When the snooze function is set to OFF, while the alarm is sounding, press “SNZ”does not have this
snooze function.
Maximum/Minimum Temperature/Relative Humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “MEM” button:
Once to show the maximum temperature and humidity values.