YOYORouter BE5 User manual

High Performance Combo Router BE5
Quick Start Guide Update
Sett ng up YOYORouter BE5 n Ethernet WAN Mode w th Fa lover
Configure YOYORouter BE5 in Ethernet WAN mode and test the connection.
To add failover to 3G Wireless WAN, ensure that your IM Card is inserted and the Ethernet WAN is
connected then follow these steps:
1. Log in.
2. elect Advanced then Network Setup.
3. Make sure that Connect on Control is set to Auto Reconnect (always-on).
4. Against Combo WAN Status, click the Sett ng button.
5. et Combo WAN Mode to Fa lover.
6. Enter an IP address in Remote Host for Keep Al ve that YOYORouter can ping to check the
connectivity. This can be numeric, e.g. 8.8.8.8 or text, e.g. www.google.com.
7. Your Ethernet WAN connection is shown as pr mary WAN. To add the 3G WAN as failover, click the Add
button against Secondary WAN and select 3G in the drop-down box.
8. Click the Save button.
9. The Dial-Up Profile (connection settings) for 3G mobile broadband are now displayed.
• elect Auto-Detect on for automatic configuration based on your IM card (recommended).
• elect Manual if you need to select alternative or enter special settings. elect your country and the
network operator, or Others to enter your own settings.
• If your IM requires a PIN code, enter it now.
10.Click the Save button then click OK to reboot YOYORouter.
BE5 Update double sided:La out 1 15/12/11 18:01 Page 1

Check ng Fa lover to 3G
1. Check that YOYORouter is normally connected to the Ethernet WAN connection
•System Status shows Ethernet WAN connection details.
•Fa lover Status shows zeroed IP addresses and blank Connect on T me
•W reless Modem L nk Status indicates D sconnected.
2. Unplug the Ethernet cable from the WAN port and check that Failover occurs:
•System Status shows blank Remaining Lease Time and zeroed IP addresses
•Fa lover Status shows 3G connection information (IP numbers) and Connect on T me.
•W reless Modem L nk Status indicates Connected.
3. Re-connect the Ethernet WAN and check that service reverts to the Ethernet WAN connection.
Normal (Ethernet) Failover (3G)
BE5 Update double sided:La out 1 15/12/11 18:01 Page 2