Z-SHADE Everest User manual

2 YEAR LIMITED WARRANTY
Z-Shade Company Ltd., manufacturer of the product, warrants to the original purchaser
who provides a dated sales receipt from an Authorized Dealer, each part of the Z-Shade
product to be free from defects in material or workmanship for a period of two (2)
years after the date of original purchase. The Z-Shade frame is covered under a limited
two (2) year warranty and guarantees the frame to be free from defects in material or
workmanship. This warranty applies only for normal and expected uses, as determined by
the manufacturer.
Z-Shade Company Ltd. obligation and liability under this warranty is limited to the repair or
replacement (at its option) of the product or its parts, after its own review and examination.
RETURN GOODS: Before returning any part or product to Z-Shade, please phone or write
to obtain specific return shipping instructions. All shipping costs must be prepaid, and
Z-Shade is not responsible for products damaged in transit.
CONDITIONS: This warranty shall be void as to any product which has been altered or
modified in any manner. This warranty does not apply to damages caused by wind, rain, or
other forces of nature, not to accidental or deliberate damage of the product, nor to use of
the product that does not conform with the product instructions.
This warranty is provided in lieu of all other warranties, expressed or implied.
PRODUCT INFORMATION:
Read this information before proceeding. It is the user’s responsibility to take the following precautions
at all times.
• AlwaysstakeorweighdownyourZ-Shade™product.Donotuseinanypotentiallywindyorrainy
weather. Wind and rain can damage your product and may also result in injury to you or others.
Therefore, do not rely on product for protection in heavy or prolonged rain storms.
• TheZ-Shadeproductisdesignedasatemporarysunshelter.Donotleaveupforextendedperiods.
• UsecautionwhenhandlingtheZ-Shadeframe.Avoidpinchinghandsorngersasframeopensorcloses.
• DonotuseZ-Shadeproductinalightningstorm.
• DonotleaveyourZ-Shadeproductunattended.
• DonotbuildresunderZ-Shadeproduct.
PRODUCT CARE/MAINTENANCE:
ForlonglastingdurabilityandthebestpossibleprotectionforyourZ-Shadeproduct,followthesecareand
maintenance instructions:
• Useamildsoap(notdetergent)andplentyofwaterfortopcleaning.
• LettheZ-Shadetopandframedrycompletelybeforeclosingorstoringtoavoidmildew.
• TheZ-Shadeframewilloperateandlookbetterifoccasionallywipedwithsiliconespray,especiallybefore
andafteruseindampconditions.Removeexcesssiliconeresiduebeforeattachingtop.
• Slightlytightenboltsifframebecomesloose.
©2014 Z-Shade Company Ltd. All Rights Reserved.
EVEREST 1213
USER MANUAL
Z-Shade Company Ltd.
(855) 4 Z-SHADE
[phone]
www.zshadeusa.com
Instant CANOPY

Locking
Strips
Pull
Pin
Snap
Button
Snap
Button
With partner, grasp two
outer legs, slightly lift off the
ground, and step backwards
- stopping at full arms’
length.
INITIAL SET UP
SET UP
PACKAGE INCLUDES
With partner on opposite side of canopy, place
your Z-Shade frame in the center of area to be
shaded. Grasp outer legs, lift off the ground,
and step backwards - stopping at full arms’
length.
1
Unfold the polyester top and
place it over the open frame.
2
Grasp the top and bottom of the truss on
opposite sides. Slightly lift canopy up and push
hands together while stepping backwards until
canopy is fully opened. Be careful not to pinch
fingers or push too hard so as to avoid damage
to truss.
2
Secure the polyester top to
the frame by attaching the
locking strips on the top with
the locking strips on the
frame. Pull the corners down
fully.
3
• Z-Shade Frame
• Polyester Top
• 4-Piece Stake Kit
• Roll Away Bag
Please read each step before you attempt to set up. Save these instructions for future reference.
1
Engage Pull Pin slider at each corner by
pushing up on slider with one hand while
holding down on top of leg with other hand.
Pull Pin will engage in hole. Repeat on
opposite legs.
3
With partner, lift outer legs up and slide out the
inner legs until the snap button locks into outer
legs. Repeat on opposite legs.
4
With partner, slightly lift up
adjacent outer legs, depress snap
button to unlock and telescope
inner legs into outer legs.
Repeat on opposite legs.
1
Release Pull Pin at each corner
by first lifting fabric away from
slider. With one hand push up
on truss near the Pull Pin, pull
the pin out to release.
NOTE: It is much easier to
release Pull Pin when the
canopy weight has been
removed from the Pull Pin.
2
3
With partner on opposite
side, grasp top and bottom
area of trusses. Lift the
canopy up slightly and
shake it while stepping
towards your partner until
the unit is 3/4 closed.
With each partner grasping
two outer legs, push frame
together to fully close it.
Be careful not to pinch
fingers!
Store canopy in roll away bag.
4
Grasp top and bottom area of
trusses. Lift the canopy up
slightly and shake while
stepping towards your partner
until 3/4 closed. With each
partner grasping two outer legs,
push frame together to fully
close it. Be careful not to pinch
fingers!
TAKE DOWN
WARNING: Keep all flame and heat sources away from all product fabrics. These fabrics meet
the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact
with any flame source. The application of any foreign substance to the fabric may render the
flame-resistant properties ineffective.