Zamel EXTA ZCM-11 User manual

ZCM-11, ZCM-11/U TIME PROGRAMMER
WEEK’S - SINGLE-CHANEL INSTRUCTION MANUAL
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. [phone], Fax [phone]
www.zamelcet.com, e-mail: [email protected]
APPEARANCE
FEATURES
TECHNICAL DATA
DESCRIPTION
ZCM-11
Power supply terminals: A1, A2
Input rated voltage: ZCM-12: 230 V AC~(-15 ÷ +10 %)
ZCM-12/U: 24 ÷ 250 V AC, 30 ÷ 300 V DC
Nominal frequency: 50 / 60 Hz
Rated power consumption: 2 W / 14 VA
Number of channels: 1
Program quantity: 400 (200 On/Off pairs)
Program: daily, week’s
Operating modes: manual, automatic, random, impulse
Change of season summer/ winter: automatic, manual
Colour of LCD panel lighting: amber
Input: yes
Accuracy of time measurement: max ±1 s / 24 h at temp. 25 °C
Time of clock maintenance: 3 years
Time of programme maintenance: 10 years
Clamps of release system: IN, IN, IN, IN
Receiver input (supply) terminals: 11, 12, 14
Output relay parameters: 1 NO/NC-16 A/250 V AC1 4000 VA
Number of terminal clamps: 12
Section of connecting cables: 0,2 ÷ 2,50 mm2
Ambient temperature range: -20 ÷ +60 oC
Operating position: freely
Mounting: rail TH 35 (PN-EN 60715)
Protection degree: IP20 (PN-EN 60529)
Protection level: II
Overvoltage category: II
Pollution degree: 2
Dimensions: double-modular (35 mm) 90x35x66 mm
Weight: 0,140 kg
Reference standards: PN-EN 60730-1; PN-EN 60730-2-7
PN-EN 61000-4-2,3,4,5,6,11
●Week’s cycle control in dependence of
the current hour,
●Double-module casing with a protection
flap,
●Random op mode, additional control
input IN,
●Many programmes enabling various
applications,
●LCD display illumination,
●Mounted on TH 35 rail.
Programmable control timers are de-
signed for time functions execution in
automatics and control systems. Week’s
programmer controls the output relay in de-
pendence of program settings (day, hour).
The device is fitted with some additional
functions, among other things the random
function that is used for the operating mode
changing by means of an external push
button. It is possible to mount the device
on TH 35 rail and seal it if needed. A simple
menu layout and an ergonomic keyboard
enable easy and intuitive unit operating.
The construction of the system guar-
antees supporting of all the settings
with battery energy when the electric
power supply is off .
CAUTION:
Before installing
the device in the
switchboard
or starting the
system operation
in order to pro-
gramme it, the
battery security
separator should
be removed against
discharging.
The device should be connected
to a singlephase system accor-
ding to current standards. The
device connections will be descri-
bed in this manual. Only qualified
electricians are allowed to mount,
connect and adjust the device. It is necessary
to read this manual and know the unit functions
before the device mounting. Do not disassembly
the device casing or you will lose any warranty
rights and expose yourself to the electric shock
hazard. Before mounting operation make sure
of disconnecting the connection wires from the
electric network. Use a cross-head screwdriver
of 3.5 mm diameter to mount the device. The
relay should be carried, stored and used in an
appropriate way. Do not mount the device in
case of any device parts lack, damage or defor-
mation. In case of malfunction please notify the
manufacturer.
CAUTION
VER. 002_21.09.2009
Winter/summer time
Random mode
Manual mode
Automatic mode
Week’s day
Relay state
Info field
Current time (hh:mm:ss)
Power terminals
(A1, A2)
LCD display
Control buttons
Relay output terminals
(12, 12, 11, 11, 14, 14)
Trigger terminals
(IN, IN, IN, IN)
The symbol means selective collecting
of electrical and electronical equipment.
It is forbidden to put the used equipment
together with other waste.
DESCRIPTION
MAIN MENU
DATE SETTING
- Current date setting; entry after pressing OK;
YEAR - choose adequate year with cursors confirm with OK, range of
years: 2000÷2099;
MONTH - choose month with cursors confirm with OK;
DAY - choose day with cursors confirm with OK; the system has a protec-
tion against introducing incorrect parameter of a day for a given month (it
takes into account leap years and it automatically calculates the day of the
week on the basis of an arranged date);
Confirmation causes movement to a date setting window and set-up of cur-
rent summer/ winter time - if the option is arranged.
It is possible to exit every submenu window in any moment without sav-
ing settings by pressing the button or .
Description of elements and messages displayed
- days of week - day, - year
- transmitter’s status - program setting
- automatic mode - current time setting and summer/winter time shift
- manual mode - current date setting
- random mode - random mode setting
- impulse mode - extenal input setting
- external input - impulse mode setting
- winter time - automatic, - user
- summer time
- on/off
Button description
• in the main window - the automatic mode enter or relay state changeover, if the timer already in the automatic
mode;
• in the main window (3 seconds) - the random mode enter / exit;
• in the random mode - randomizing active/inactive manual toggle;
• the other windows - exit to a higher level without changes saving;
• in the main window - the manual mode enter or the relay state changeover, if the timer already in the manual mode;
• in the random mode - the relay state changeover and randomizing switch-OFF;
• the other windows - exit to a higher level without changes saving;
• in the main window - the main menu enter;
• the other windows - a submenu enter or setting acknowledgement;
• window/option toggle or set value increase/decrease;
Menu enter by pressing OK;
menu items scrolling by means of cursors .
Function Description
PROGRAM SETTING
CURRENT TIME SETTING
CURRENT DATE SETTING
WINTER/SUMMER TIME SETTING
RANDOM MODE SETTING
EXTERNAL INPUT SETTING
IMPULSE MODE SETTING
TIME SETTING
WINTER / SUMMER TIME SETTING
OPERATING MODE CHANGE (AUTOMATIC, MANUAL, RANDOM)
- setting the current clock time; entry after pressing
OK;
HOUR- choose adequate hour with cursor which you can
set in 1-24 or 1-12 (AM) and 1-12 (PM)format; confirm
with OK;
MINUTES - choose adequate parameter of minutes with cur-
sors confirm with OK;
Confirmation of the parameter of minutes causes simultane-
ous nullification of the parameter of seconds and movement to
the window of time setting.
It is possible to exit every submenu window in any moment
without saving settings by pressing the button or .
- winter/summer time toggle mode selection: -
automatic time changing on the last March Sunday, at 2:00
into summer time and on the last October Sunday, at 3:00 into
winter time, - winter/summer timer toggle manual, by
user; option entering after pressing OK;
MODE SETTING - with select or acknowl-
edge with OK; after selecting , winter/summer time will
be toggled automatically; after selecting mode you will
enter the next window;
With select winter/summer, where is winter time, -
summer time; if the time icon is changed, the timer will correct
the current time appropriately; acknowledge by pressing OK;
After time mode selecting winter/summer time change window
will be open.
MANUAL OP MODE TOGGLE - if the main window is open
and the timer is in the automatic mode pressing key will
force the unit to toggle into the manual mode and the relay
state changeover;
Successive key pressing will force the relay state changeo-
ver without the op mode;
AUTOMATIC MODE TOGGLE - if the main window is open
and the timer is in the manual mode pressing key will force
the unit to toggle into the automatic mode and the relay state
changeover;
Successive key pressing will force the relay state change-
over without the op mode;
RANDOM MODE TOGGLE - in order to enter the random
mode it is necessary to press and hold key for 3 secs;
Continuous light iindicates that the timer is not in the time
range where ON/OFF states randomizing is to be active, and
the pulsing light indicates that the unit is randomizing ON/
OFF states according to RANDOM MODE SETTING menu
settings; pressing key orces randomizing ON/OFF states
and the relay state changeover ( pulsing ), and RANDOM
MODE SETTING menu settings are still binding; successive
pressing key forces randomizing to be OFF;
Pressing key forces the relay changeover and randomiz-
ing switch-OFF, if it was active ( is lighting). The random
mode exit is possible by pressing and holding for 3 secs. .
Randomizing activity/inactivity update is being operated either
in automatic or manual mode.

PROGRAM VIEWING
PROGRAM SETTING
IMPULSE PROGRAM SETTING
PROGRAM CANCEL / RESTORE
- the impulse generating mode switch ON / OFF and impulse duration time setting; the display shows the current
mode state ( - ON, - OFF); enter edition with OK;
With cursors select the mode state or ; acknowledge selection with OK; if the option selected, the main
menu will be entered;
If selected set with cursors impulse duration time in seconds; acknowledge with OK;
After setting acknowledgement the impulse mode setting window is entered. In the impulse mode only programs are
available.
- defining ON-times and OFF-times for the given week’s days for the given programs running in automatic mode
messages on busy ON and OFF programs quantities are being showed alternatively in the current window ,
(e. g. ); edition entering by pressing OK; the programs are numbered as pairs ( / ). Max programs quantity is
equal to 200 / pairs;
With cursors select a program at (e.g. ) for parameters editing and enter editing mode with OK;
HOUR - with cursors select an hour, acknowledge with OK;
MINUTE - with cursors select minutes, acknowledge with OK;
WEEK’s DAY - with cursors select the week’s day when the given program is to be active (there are 16 week division
combinations available); acknowledge with OK - the program will be saved;
The next stored program will be displayed (e.g. ) - Press OK. to enter edition; in order to select the other pro-
gram use cursors, to exit programming press or ;
The last program is .
PROGRAM VIEWING - viewing settings for the switching pro-
grams ( / ) i.e. hours, minutes and the week’s days; enter
viewing with OK;
In order to scroll the programs press successively cursor
; cursor increases the program no.; cursor decreases
the program no.;
The programs are numbered in the form of ON / OFF pairs
(/ ) where every program may be treated independently;
there are 400 programs (200 pairs / ).
It is possible to exit every submenu window in any moment
without saving settings by pressing the button or .
PROGRAM CANCEL / RESTORE - the option is used during program setting and viewing for program cancelling (inacti-
vation) and restoring; enter by pressing OK;
With select the program to be cancelled / restored;
Press and hold OK for 3 seconds - if the program is active it will be cancelled (inactivated) and will not be checked during
the timer operating in the automatic mode (however it will by saved in the storage and it will be possible to restore the
program); horizontal lines will be displayed;
If the program is cancelled, it will be restored by pressing OK and its edition will be possible , pressing and holding OK
for 3 seconds will cause the program restoring without time edition possibility .
Week division combinations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
EXTERNAL INPUT SETTING
MAIN RESET
RANDOM MODE SETTING
- setting the unit mode after the IN external input triggering; enter edition by
pressing OK; with cursors select an appropriate external input mode, where:
- the external input function is OFF;
- the manual mode with the relay continuous switch-OFF;
- the manual mode with the relay continuous switch-ON;
- the automatic mode, the relay is being switched ON / OFF according to the preset
programs;
- the random mode according to the RANDOM MODE SETTING menu settings;
Acknowledge selection with OK; after acknowledgement the external input settings win-
dow will be entered.
It is possible to exit every submenu window in any moment without saving settings
by pressing the button or .
In order to cancel the clock system (time, date, activity of given functions etc.) you
should hold buttons ( and ) simultaneously in the main menu for 3 sec;
All the display fields will light up;
After a while, the clock will automatically set date and time.
Attention: In order to restore factory settings, you should additionally hold button OK
- setting the time range and days when the randomize function is to be ON and
defining maximum relay ON-time and OFF-time in the random mode; enter with OK;
select the appropriate window with cursors, where:
- defining the time and day of the random mode beginning (active randomizing);
- defining the time and day of the random mode ending (inactive randomizing);
- defining maximum relay ON-time in minutes - the time will be randomized for the
range from 1 minute to minutes;
- defining maximum relay OFF-time in minutes - the time will be randomized for
the range from 1 minute to minutes;
Window : press OK to enter; with cursors set randomizing ON hour, acknowledge
with OK; with set randomizing ON minute, acknowledge with OK; with cur-
sors set the days when randomizing is to be ON, acknowledge with OK; window will
be open.
Window : press OK to enter; with cursors set randomizing OFF hour, acknowledge
with OK; with set randomizing OFF minute, acknowledge with OK; with cur-
sors set the days when randomizing is to be OFF, acknowledge with OK; window will
be open.
Window : press OK to enter; with cursors set maximum ON- time (in minutes),
acknowledge with OK; window will be open.
Window : press OK to enter; with cursors set maximum OFF-time (in minutes),
acknowledge with OK; window will be open.
It is possible to exit every submenu window in any moment without saving settings
by pressing the button or .
5m 7m 3m 4m 8m 1m 2m
3m 3m1m 2m 1m 4m
t
11 14
11 14
CONNECTION
MOUNTING
ADVANTAGES
Intelligent calendar - the programmer is fitted with a built-in calendar
which fits leap years automatically, disables entering incorrect dates,
calculates a week’s day on the basis of the current date and fits the
summer / winter time change.
General purpose external input - the programmer is fitted with an ex-
ternal input that enables the operating mode change without operating
a switchboard, e.g. by means of a remote push button.
Programmable random mode - it is possible to set beginning and
ending time, and the day of the random mode activity. Additionally, it
is possible to program maximum ON and OFF times in dependence
of user’s needs.
Additional impulse mode - it is possible to switch the timer into the
impulse mode which gives control units new capabilities.
DIMENSIONS
PRODUCT FAMILY
ZCM-11 Programmer belongs to ZCM
family of products.
1. Disconnect power supply by the phase
fuse, the circuit-breaker or the switch-
disconnector combined to the proper
circuit.
2. Check if there is no voltage on con-
nection cables by means of a special
measure equipment.
3. Install the ZCM-11 on the TH 35 DIN
rail in the switchboard.
4. Connect the cables with the terminals in
accordance with the installing diagram.
5. Switch on the power supply from the
mains.
WARRANTY CARD
Salesman stamp and signature, date of sale
There is 24 months guarantee on the product
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
INNER DIAGRAM
RELAY CAPACITY
L(+)
L(+) / N(-)
N(-)
A2
A1
IN
μC
KLAW. LCD
RTC
ZAS.
Programmer type:
11 - week (1 channel)
12 - week (2 channel)
21 - year
31 - astronomical
Device type
Power supply:
ZCM-xx - 230 V AC
ZCM-xx/U - 24 ÷ 250 VAC
30 ÷ 300 V DC