Zanussi 534320 User manual

ZANUSSI
P R O F E S S I O N A L
RACK TYPE DISHWASHERS
COMPACT RTCS 180
534322
Net weight - kg. 575 575 533 533
Total installed power - kW 25.7 25.7 25.6 25.6
water flow - liters/hr 240 240 240 240
boiler power - kW 12 12 12 12
boiler capacity - lt. 12 12 12 12
temperature - °C 80-90 80-90 80-90 80-90
Rinsing
pump power - kW 1.0 1.0 1.0 1.0
tank capacity - lt. 100 100 100 100
temperature - °C 55-65 55-65 55-65 55-65
1st wash
pump power - kW 0.20 0.20 0.20 0.20
tank capacity - lt. 45 45 45 45
temperature - °C <35 <35 <35 <35
Pre-wash
height/with open door 1771, 2119 1771, 2119 1771, 2119 1771, 2119
depth 884 884 884 884
width 1837 1837 1837 1837
External dimensions - mm
Insulation l l l l
Air emission - m³/h 180 180
Capacity baskets/h 1st/2nd speed 180, 120 180, 120 180, 120 180, 120
Capacity dishes/h 1st/2nd speed 3240, 2160 3240, 2160 3240, 2160 3240, 2160
N° of speeds 2 2 2 2
cold water inlet °C 15 15 15 15
hot water inlet °C 50 50 50 50
pressure min. , max. - bar 3, 7 3, 7 3, 7 3, 7
Water supply
Energy Saving Device incl. cond. unit l l
Feeding direction from RH to LH from LH to RH from RH to LH from RH to LH
Power supply Electric Electric Electric Electric
Model Electronic - A Electronic - A Electronic - B Electronic - B
RTCS180ERA
534320
RTCS180ELA
534321
RTCS180ERB
534322
RTCS180ELB
534323
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The Zanussi Dishwashing range is produced
for customers with the highest conceivable
demands for good efficiency, economy and
ergonomics for dishwashing operation. The
product range comprises glasswashers,
undercounter dishwashers, hood type
dishwashers, rack type dishwashers and pot
and pan washers. The rack type dishwasher
range is designed to be easily connected
with the equipment included in the Zanussi
Handling System range, to create a
functional and ergonomic dishwashing area.
The rack type dishwasher RTCS180 has a
capacity up to 180 racks per hour with 2
speeds, variable on installation. The range
consists of 4 electrically heated models
(steam on request), available with or without
Energy Saving Device (ESD).
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Solid 3mm square stainless steel
sub-frame with bolt-together construction that
can be delivered assembled or in modules to
be connected on site.
� All rear positioned water tubes in stainless
steel.
� Only one cable for electrical connection.
� Service from the front and from the side.
� Pre-arrangements for automatic detergent
dispenser, energy management device and
HACCP implementation (both basic as well
as integrated system).

RACK TYPE DISHWASHERS
COMPACT RTCS 180
EBBC10 2010-05-28 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
SPLASH HOOD-RIGHT SIDE-COMPACT RACK
TYPE
864247 864247 864247 864247
SPLASH HOOD-LEFT SIDE-COMPACT RACK
TYPE
864248 864248 864248 864248
KIT SILASTIC CURTAINS FOR RACK TYPE DW 864245 864245 864245 864245
KIT SANITIZ.(1 HEAT.EL)-SHORT CRT 180R/H 864161 864161 864161 864161
KIT AIR GAP FOR COMPACT RACK TYPE 864309 864309 864309 864309
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW 867051 867051 867051 867051
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW 867050 867050 867050 867050
EL.HOT AIR BLOWER-RIGHT-600MM-COMPACT
RT
864506 864506
EL.HOT AIR BLOWER-LEFT-600MM-COMPACT
RT
864507 864507
EL. DRYING TUNNEL-CORNER-R>L-COMPACT
RT
864520 864520
EL. DRYING TUNNEL-CORNER-L>R-COMPACT
RT
864521 864521
EL. DRYING TUNNEL-COMPACT RT-R>L-900 MM 864516 864516
EL. DRYING TUNNEL-COMPACT RT-R>L-600 MM 864518 864518
EL. DRYING TUNNEL-COMPACT RT-L>R-900 MM 864517 864517
EL. DRYING TUNNEL-COMPACT RT-L>R-600 MM 864519 864519
DRAIN KIT FOR MODULAR+COMPACT RACK
TYPE
864150 864150 864150 864150
BASKET FOR 5 HALF INSULATED TRAYS-RED 867005 867005 867005 867005
12 S/S PLUGS FOR
WASH.ARMS-MODUL/COMP.RT
864239 864239 864239 864239
RTCS180ERA
534320
RTCS180ELA
534321
RTCS180ERB
534322
RTCS180ELB
534323
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
� Pre-wash is separate from wash zone with
less than 35°C water without chemicals for
maximum dirt removal and incorporates
automatic partial drain.
� In the wash zone all the soil is removed by
the combination of the mechanical washing
action by means of a powerful 300 litres /
minute self draining wash pump, the thermal
action of the heating elements that guarantee
a constant water temperature of between 55°
and 65°C and appropriate detergents. Wash
tank is pressed.
� Rinse zone: clean water is used to
eliminate any trace of detergent from the
wash-ware.
� As optional extra the RTCS180 can be
equipped with a drying zone for fast and
efficient drying.
� Tanks are pressed with completely
rounded corners and sloping base to facilitate
cleaning.
� Smooth surfaces.
� 304 AISI stainless steel front and side
panels, strainers and wash and rinse arms.
� Wash arms and double tank filter (flat and
deep box) easy to remove.
� Height adjustable stainless steel feet.
� All models finished in top quality materials
with double skinned construction to aid
durability and reduce noise.
� Self-draining wash pumps provide
maximum hygiene.
� Easy access to the energy saving
condenser unit.
� Large balanced inspection doors for easy
access to wash area.
� Self-cleaning cycle in pre-wash, wash and
rinse zones.
� Automatic start/stop function.
� Simple electric control panel.
� Counter balanced door with safety switch
and easy to grip handle.
� Built-in rinse water heater to increase the
temperature of the final rinse water.
� Electronic control panel with
autodiagnostic check control.
� 35mm thickness foam injection insulated
doors to reduce noise and reduce heat
dispersion.
� Separate pre-wash for lower detergent
and water consumption.
� Available with version equipped with
Energy Saving Device (ESD) to pre-heat the
incoming cold water and to save up to 12kW
of energy. ESD incorporates a condenser
unit to decrease temperature and humidity of
the outlet hot steam.
� 98% recyclable by weight.
� CFC free packaging.
� Low noise level.
� Developed and produced in ISO 9001 and
ISO 14001 certified factory.
* For models without ESD, the installation is
recommended below a dishwashing hood to
convey steam.

RACK TYPE DISHWASHERS
COMPACT RTCS 180
EBBC10 2010-05-28 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
XP - Connection for detergent probe l
XP - Connection for detergent dispenser l
V - Condensation outlet l
HWI - Hot water inlet G 3/4"
EQ - Equipotential screw l
EI - Electrical connection 400 V, 3N, 50
D - Water drain G 1 1/2"
CWI - Cold water inlet G 3/4"
RTCS180ERA
534320
LEGEND
534320

RACK TYPE DISHWASHERS
COMPACT RTCS 180
EBBC10 2010-05-28 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
XP - Connection for detergent probe l
XP - Connection for detergent dispenser l
V - Condensation outlet l
HWI - Hot water inlet G 3/4"
EQ - Equipotential screw l
EI - Electrical connection 400 V, 3N, 50
D - Water drain G 1 1/2"
CWI - Cold water inlet G 3/4"
RTCS180ELA
534321
LEGEND
534321

RACK TYPE DISHWASHERS
COMPACT RTCS 180
EBBC10 2010-05-28 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
XP - Connection for detergent probe l
XP - Connection for detergent dispenser l
HWI - Hot water inlet G 3/4"
EQ - Equipotential screw l
EI - Electrical connection 400 V, 3N, 50
D - Water drain G 1 1/2"
CWI - Cold water inlet G 3/4"
RTCS180ERB
534322
LEGEND
534322

RACK TYPE DISHWASHERS
COMPACT RTCS 180
EBBC10 2010-05-28 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
XP - Connection for detergent probe l
XP - Connection for detergent dispenser l
HWI - Hot water inlet G 3/4"
EQ - Equipotential screw l
EI - Electrical connection 400 V, 3N, 50
D - Water drain G 1 1/2"
CWI - Cold water inlet G 3/4"
RTCS180ELB
534323
LEGEND
534323