Zecre PH810W User manual

Trail Camera WIFI
Instruction Manual
Model: PH810W

LANGUAGE
English ···················································· 1~39
Deutsch··················································41~81
Français ···············································83~122
Italiano················································ 124~162
Español ··············································164~203

Trail Camera WIFI

English
SIMPLE TO USE·················································· 1
AFTER SALES SERVICE······································ 2
1. INSTRUCTION ················································· 2
2. BEFORE OPERATION ······································ 8
3. CAMERA OPERATION······································ 9
4. TEST CAMERA ··············································· 25
5. VIEWING/DELETING THE PHOTOS/VIDEOS······ 26
6. DOWNLOAD FILES ········································· 29
7. MOUNTING GUIDE·········································· 29
8. TROUBLESHOOTING/ FAQ·······························32
9. CUSTOMER SERVICE & WARRANTY ················37
10.ELECTRICAL SAFETY INSTRUCTIONS ············ 38

SIMPLE TO USE English 1
SIMPLE TO USE
1.Insert a Micro SD card and put 4 or 8 AA batteries (Not
included )in.
Please notice the front and back of the Micro SD card when you
insert it in the card slot. If you want to take out the card from
the slot, please lightly press it then pull it out. Please use high
quality alkaline batteries to power the camera.
2.Setup menu in “TEST” mode
Slide the switch to “TEST”, press MENU set menu. Set up the
parameters that you desire in the “TEST” mode.
3. Slide the switch to “ON” mode and the camera starts
working
It will start to count down 5 seconds when you switch to “ON”,
then the screen will turn o󰀨. The camera is in standby mode.
When people or animals trigger the camera to work, it will
automatically take photos or videos. In ON mode, you can set
menu and watch video in APP "Trailcam Link".
4.Play back photos or videos
Slide the switch to “TEST”, press REPLAY to watch the photo or
video.

AFTER SALES SERVICE
2English
AFTER SALES SERVICE
We are committed to sincere and thoughtful service to ensure
customer satisfaction. If you have any questions or concerns
about our products, please feel free to email us.
From USA, email at: [email protected]
From EU, email at: [email protected]
We will reply you within 24 hours and provide you with a 100%
perfect solution. If you want to learn more about the following
information, you can scan the QR code to visit our website
www.hapimpofficial.com
■ Beginner tutorial
■ Download the manuals for di󰀨erent models
■ Get new product information
■ FAQ (Frequently Asked Questions and Answers)
■ Make suggestions or complaints about the products
■ Product operation video
1.INSTRUCTION
1.1.Features
● Bluetooth/WiFi Connection & APP Control. This WiFi hunting
camera will act as a WiFi hotspot without the need to be
connected to the router, which means that it will act as its own
network to which you can connect your mobile phone using a
free app"Trailcam Link". Within the 15- meter distance between
the hunting camera and your phone, connect Bluetooth and wi
and turn on the app, you will be able to download and watch the
recorded pictures and videos or set the menu from the app.
● 4K, 2.7K, 1080P, 720P, WVGA ,VGA video resolution.
● Programmable 5 , 8 , 12 , 16 , 20 and 32 Megapixel high-
quality resolution.

1.INSTRUCTION English 3
● 45 pieces of 940nm Infrared night vision LED for ash range
as far as 82 feet.
● In " Photo & Video " mode , the camera takes pictures rst
and then video at every trigger event .
● Impressively quick trigger time (0.1-0.5 seconds at a standard
temperature of 25℃ , Preboot 0.1 seconds).
● Unique side Prep Sensor design provides wider sensing
angle and enhances camera's response speed.
● In Time lapse setting, the camera automatically and
continually takes pictures/videos at a specied interval. It is
useful when observing plants owering, bird building nest, or
when monitoring unattended properties such as parking lots.
● With Target recording time on, the camera can be
programmed to only work in specied period every day. This
feature can work together with the Time lapse feature.
● Serial No setting enables you to code locations in the photos.
It helps multi-camera users identify the location when reviewing
the photos.
● Ultra-low standby power consumption. Extremely long
standby life.
● Built-in 2.4" TFT colour display to review images and videos.
● Date, time, temperature and moon phase can be stamped in
the pictures.
● Backpack-looking tree grabber makes mounting and aiming
a snap.
● Perform in the most extreme temperatures from -20℃to +60℃
● Compact size (5.6 x 4.2 x 2.9 inches ).
● Lockable and password protected.
● IP66 water resistance.
1.2.Application
● Trail camera for hunting.

1.INSTRUCTION
4English
● Animal or event observation.
● Motion-triggered security camera, for home, o󰀩ce and community.
● All other indoor/outdoor surveillance where invasion evidence
needed.
1.3.Camera Overview
1.Monitor
2.MENU button
3.REPLAY button
4.Left button
5.Up/Video button
6.Down/Photo button
7.Right button
8.SHOT button
9.OK button
10.Speaker
11.Micro SD card slot
12.USB jack
13.OFF
14.TEST
15.ON
16.Lens
17.Infrared LEDs
18.Front motion PIR sensor
19.Side motion PIR sensor
20.DC jack
21.Bracket slot

1.INSTRUCTION English 5
1.4.Camera Specications
Photo resolution 32MP, 20MP, 16MP, 12MP, 8MP, 5MP,
Video resolution 4K, 2.7K, 1080P, 720P, WVGA, VGA
File format JPEG/AVI
Lens F=4mm; F/NO=2.0; FOV=125°; Auto IR le
External memory Up to 512GB; Recommended U3
Internal memory Stock 256 MB DDR
Range of IR ash 82 Feet
Triggering distance 82 Feet (Below 77 ℉/25℃at the normal
level)
Detection angle of PIR sensors 125°
PIR sensitivity High/Normal/Low
Camera temperature compensation Yes
Triggering time 0.1-0.5seconds; Pre boot 0.1 seconds
Shot lag 5 seconds to 60 mins programmable
Photo series 1-3, programmable
E󰀨ective shooting distance Daytime: 1m-innitive; Night time:1m-20m
Video length 3 seconds to 10 minutes
Photo & Video First take photo then video
Photo stamp On/O󰀨; Includes serial NO, temperature and
moon phase
Time lapse On/O󰀨; programmable
Target recording time Start & Stop; 00:00 to 23:59
Password protection 4 digit numbers
Built-in Microphone Yes
Built-in Speaker Yes
Auto-distinguish images Color images in daytime ; Black and white
images at night
Automatically turn o󰀨 the screen (when
switch is in TEST position)
Automatically turn o󰀨 the screen in 2 minutes
while no keypad controlling
Interface External: TV out (NTSC/PAL, Mini USB);
Mini USB; Micro SD Card slot; 6V DC power
jack
Power supply Batteries;at least 4xAA, expandable to 8xAA
or External 6V 1.5-2.0A power supply
Waterproof Yes; IP protection Class 66
Operating temperature -20℃to +60℃
Dimensions 5.6*4.3*2.9 inches

1.INSTRUCTION
6English
1.5.Simple to Use
①Install batteries ②Insert MicroSD card ③Switch to TEST
④Press MENU to setting ⑤Language setting ⑥Format memory card
⑦Set the Date & Time ⑧Switch to “ON” to use ⑨View Files: switch to
TEST, press REPLAY

1.INSTRUCTION English 7
1.6.Explanation of Camera Screen

2.BEFORE OPERATION
8English
2.BEFORE OPERATION
2.1.Power Supply
1)Batteries Installation
Open the camera by unlocking latch rstly. The battery
compartment is the right part of the camera. Open the protective
cover of the battery compartment and insert 4 x 1.5 V LR6/AA
batteries into the battery slots. Make sure insert each battery
with correct polarity(+ and - end against the long spring of each
battery slot). To increase the operating time, you can use 8 x 1.5
V LR6/ AA batteries. When using 4 batteries, they all should be
installed in the top 4 slots or the bottom 4 slots.
NOTES:
● NEVER INSTALL DIFFERENT TYPES OF BATTERIES or
MIXED NEW AND OLD BATTERIES in the product at the same
time.
● Anytime you load or unload batteries, make sure that the
camera is OFF. If using an external power source, remove the
internal battery.
2)Using an External Power Source
Optionally, you can connect an external 6V 1.5~2.0 A DC
power-source to the DC jack at the bottom of the camera. The
power connector is a 3.5 x 1.35 mm
coaxial DC power plug with positive
'tip' (inside pin) polarity.
Please notice that the external power
source does not supply power to the
batteries in the battery compartment

3.CAMERA OPERATION English 9
2.2.Insert the Micro SD Card
The camera uses an Micro SD memory card to save photos (in
JPEG format) or videos (in AVI format). Micro SD cards up to
512 GB capacity are supported.
Insert the Micro SD card (with the camera's power switch in the
OFF position) before beginning to operate the camera. Don't
insert or remove the Micro SD card when the power switch is in
the ON position.Before inserting the memory card, please open
the front cover and make sure that the write protect switch on
the side of the card is OFF (NOT in the "Lock" position).
● Insert the Micro SD card into the card slot. A "click" sound
indicates the card is in successfully. If the wrong side of the
card is facing up, you will not be able to insert it without force
there is only one correct way to insert it.
● To take out the Micro SD card, please gently push in the card
(do not try to pull it out without pushing in rst). The card is
released from the slot and ready to be removed when you hear
the click.
Notes:
● Be sure the camera's power is switched OFF before inserting
or removing Micro SD cards or batteries.
● Camera will not operate without an Micro SD memory card
installed.
3.CAMERA OPERATION
3.1.Turn On/O󰀨 the Camera

3.CAMERA OPERATION
10 English
Slide the switch to "TEST / ON" to turn on the camera. Slide the
switch to "OFF" to turn o󰀨 the camera.
1 )OFF Mode
Power switch in the “OFF”position. The“OFF”mode is the "safe"
mode when any actions must be taken such as replacing the
Micro SD card or batteries or transporting the device.
2)TEST Mode
Power switch in the “TEST” position (LCD screen is on). The
purpose of the“TEST”mode is to allow you to change the
settings of the camera's parameters so that it can operate the
way as you want.
3)ON Mode
Power switch in the “ON”position, LCD screen is o󰀨 after count
down 5 seconds. After 1 minute, the camera will take photos
or videos automatically (according to its current parameter
settings) when it is triggered by the PIR sensor's detection of
activity in the area it covers.
"Trailcam LinK" APP can be connected in ON mode.
3.2.Setup Menu and Functions
We have two ways to setup menu: in the camera or in the APP.

3.CAMERA OPERATION English 11
1)Settings menu in camera
● Slid the Mode Button to "Test", then you can set the camera's
parameters as your need.
● Press “MENU”button to open the setup menu.
● Press Up/Down button ▲/▼ to scan all menu.Then press OK
button to enter the options interface.
● Press Up/Down button ▲/▼ to scan all options. And press
OK button to conrm options.
● Press “MENU”button again to turn back to last menu or exit
the setup menu.
2)Setting menu in APP: Connect the camera via Bluetooth
and WiFi
The camera is a high-quality WiFi hunting camera, which can
connect with mobile phone through WiFi/Bluetooth function.
● Download the "Trailcam Link" APP.
Method 1:
Scan the QR code to download.

3.CAMERA OPERATION
12 English
Method 2:
For Android phones, search for "Trailcam LinK" on the app store
that comes with the phone to download.
Due to network reasons or account problems in some areas, if
the app cannot be downloaded in the Google Play Store, please
contact us to get a new installation software.
From USA, email at: [email protected]
From EU, email at: [email protected]
For ios phone, please search "Trailcam LinK" on Apple Store to
download.
●Please turn on the Bluetooth function and WiFi function
of the mobile phone (NOTE: If the mobile phone is an Android
system, then the positioning function of the mobile phone needs
to be turned on).

3.CAMERA OPERATION English 13
● Open the "Trailcam LinK" APP to connect the camera.
The steps are as follows:
① Flip the camera's switch to "ON" mode. In "ON" mode, the
camera will turn o󰀨 the screen within 5seconds.
② When the camera screen is completely closed, please open
the "Trailcam Link" APP. When entering the page, the APP
page will display "TrailCam Link"Would Like to Access Your
Photos, please select "Allow Access to All Photos".

3.CAMERA OPERATION
14 English
③ Click "Connect camera".If the app prompt "TrailCam
LinK” Would Like to Use BluetoothClick "OK".（Before
operating again, make sure your bluetooth is turned on）