Zenty ZT-107 User manual
(844) 200-1945 | [email protected] Page 3of 11 Copyright © Zenty AV
The Zenty ZT-EX150 HDMI over Ethernet extender can transmitter a full 1080P 60Hz signal up to
492ft. using the latest HDBaseT transmission protocol. This extender features bi-directional power
over cable (PoC), and only requires power to be connected to either the receiver or the transmitter,
allowing for a clean installation. Using EDID pass-through, the extender will automatically detect
which resolutions and audio formats are compatible with the connected display, and set those
options to the highest standard available. Also features CEC commands, allowing source and display
devices, that support CEC, to communicate with each other via the extender, RS232 commands for
control, and bi-directional IR function.
•492ft. transmission distance over single CAT6 cable
•HDMI 1.4 | HDCP 1.4 compliant
•Video resolution up to 1080P 60Hz (YUV 4:4:4)
•HDMI High bit-rate (HBR) audio pass-through
•Power over cable (PoC) function; either the transmitter OR the receiver can be powered via
one 24V 1A included power supply
•Bi-directional IR, bi-directional RS232, CEC
Technical
HDMI Compliance
HDMI 1.4
HDCP Compliance
HDCP 1.4
Video Bandwidth
225MHz
Video Resolution
Up to 1080P 60Hz YUV 4:4:4, RGB 4:4:4
Color Space
RGB, YUV 4:4:4, YUV 4:2:2
Color Depth
8-bit
HDMI Audio Formats (Pass-through)
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1,
Dolby Digital+, Dolby TrueHD, DTS-HD Master
Audio, Dolby Atmos, DTS:X
(844) 200-1945 | [email protected] Page 4of 11 Copyright © Zenty AV
ESD Protection
Human body model - +-8kV (air-gap discharge)
& +-4kV (contact discharge)
Connections
Inputs
Transmitter:
1 x HDMI Type A [19-pin female] | 1 x IR Input
[3.5mm Stereo Mini-jack] | 1 x RS232 [Phoenix
jack]
Receiver:
1 x HDBaseT In [RJ45] | 1 x IR Input [3.5mm
Stereo Mini-jack], 1 x RS232 [Phoenix jack]
Outputs
Transmitter:
1 x HDBaseT Out [RJ45] | 1 x IR Output [3.5mm
Stereo Mini-jack]
Receiver:
1 x HDMI Type A [19-pin female] | 1 x IR Output
[3.5mm Stereo Mini-jack]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
115mm [W] x 64.7mm [D] x 17mm [H]
Weight
406g
Power Supply
Input AC100 –240V 50/60Hz
Output: DC 5V/1A (US/EU Standards,
CE/FCC/UL certified)
(844) 200-1945 | [email protected] Page 5of 11 Copyright © Zenty AV
Power Consumption
5.76W (Max)
Operation Temperature
32°F –104°F | -20°C –60°C
Storage Temperature
-4°F –140°F | -20°C –60°C
Relative Humidity
20 –90% RH (No Condensation)
Transmitter
1. Power: System power indicator
2. DC 24V: Connect 24V/1A adapter to AC wall outlet for power supply
3. HDBaseT Out: Standard HDBaseT output port. Connect HDBaseT receiver with a UTP cable
following the standard of direct interconnection method
4. HDMI In: Connect to HDMI source device, such as Blu-ray or PS5
5. IR In: Channel 2 IR receiver. Connect to an IR receiver cable
6. IR Out: Channel 1 IR transmitter. Connect to an IR transmitter cable
7. RS-232: Phoenix jack provides serial port control from transmitter to receiver
8. Connection signal indicator light:
a. Illuminating: The transmitter and receiver are in a good connection status
(844) 200-1945 | [email protected] Page 6of 11 Copyright © Zenty AV
b. Flashing: The transmitter and receiver are in poor connection status
c. No light: The transmitter and receiver are not connected
9. Data signal indicator light:
a. Illuminating: HDMI signal with HDCP
b. Flashing: HDMI signal without HDCP
c. No light: No HDMI signal
Receiver
1. Power: System power indicator
2. DC 24V: Connect 24V/1A adapter to AC wall outlet for power supply
3. HDBaseT In: Standard HDBaseT input port. Connect HDBaseT transmitter with a UTP cable
4. HDMI Out: Connect to an HD display via HDMI
5. IR In: Channel 1 IR receiver. Connect to an IR receiver cable
6. IR Out: Channel 2 IR transmitter. Connect to an IR emitter cable
7. RS-232: Phoenix jack provides serial port control from transmitter to receiver
8. Connection signal indicator light:
a. Illuminating: The transmitter and receiver are in a good connection status
b. Flashing: The transmitter and receiver are in poor connection status
(844) 200-1945 | [email protected] Page 7of 11 Copyright © Zenty AV
c. No light: The transmitter and receiver are not connected
9. Data signal indicator light:
a. Illuminating: HDMI signal with HDCP
b. Flashing: HDMI signal without HDCP
c. No light: No HDMI signal
(844) 200-1945 | [email protected] Page 10 of 11 Copyright © Zenty AV
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.
If your product does not work properly because of a defect in materials of workmanship, our company
(referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor
(5) Years”, which starts with the date of original purchase (“Limited Warranty period”), at its option
either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished
product. The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must mail-in your product during the warranty
period. This Limited Warranty is extended only to the original purchaser and only covers products
purchased as new. A purchase receipt or other proof of original purchase date is required for Limited
Warranty service.
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the
original carton. Include a letter detailing the complaint and provide a day time phone and/or email
address where you can be reached.
This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments, mis-adjustment of consumer
controls, improper maintenance, power line surge, lightning damage, modification, or service by
anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed
to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this
excludes damages for lost time, cost of having someone remove or re-install an installed unit if
applicable, travel to and from the service, loss of or damage to media or images, data or other recorded
content. The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICE, WHICH
ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
This manual suits for next models
1
Other Zenty Extender manuals
