Zenty ZT-118 User manual

[phone] | [e-mail] Page 1of 33 Copyright © Zenty AV
Zenty | Professional A/V Solution Provider
ZENTY ®
9807 EMILY LANE
STAFFORD, TX 77477
[phone]
[email protected]

[phone] | [email protected] Page 2of 33 Copyright © Zenty AV
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by electrical spikes,
surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended
in order to protect and extend the life of your equipment.

[phone] | [email protected] Page 3of 33 Copyright © Zenty AV

[phone] | [email protected] Page 4of 33 Copyright © Zenty AV

[phone] | [email protected] Page 5of 33 Copyright © Zenty AV
•Incorporates HDBaseT technology
•4 x HDMI input and 4 x HDBaseT output with 4 x HDMI Loop out
•HDMI 2.0 version support 4K@60Hz YUV4:4:4, 8bit, 18G, HDR10
•Transmit up to 70m/230ft. under 1080p, 40m/131ft. under 4K@60Hz
•HDCP 2.2/1.4 compliant
•With wide-band Bi-Direction IR routed control(38~56KHz)
•Supports 4x Analog Audio input
•Supports 4x Analog Audio and 4x SPDIF Audio extraction output
•Supports Panel Button with LCD, IR Routing, RS232, TCP/IP, PC Tool Control
•Supports POC (Receiver powered by HDBaseT Matrix)
•Supports Micro USB for FW updating
•x Main Unit (HDBaseT Matrix)
•x DC24V4A Power adapter
•x Remote control
•(5) x IR Transmitter cables, 5x Wide-Band IR Receiver cables
•x CD for control software & user manual & Command list
•(4) x 3Pin plug for Analog audio output
•1U rack design metal case with 2 mounting ears
Operating Temperature Range
-5 to +40°C (23 to +104 °F)
Storage Temperature Range
-10 to +60°C (-14 to +140 °F)
Operating Humidity Range
5 to 90 % RH (no condensation)
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Bandwidth
18Gbit/s

[phone] | [email protected] Page 6of 33 Copyright © Zenty AV
Video Format Supported
4K@60Hz, YUV4:4:4 8bit
4k@30Hz/1080P/1080i/720P/576P/480P/57
6i/480i
HDCP Compliant
HDCP2.2 and HDCP1.4
Output Video
HDMI2.0 and HDMI 1.4 (over HDBaseT and
HDMI)
Audio Format Supported
PCM, Dolby5.1, DTS5.1 digital audio
Maximum Transmission Distance
1080P 70m/230ft. | 4K 40m/131ft.
Power Consumption
68 watts (Max.)
Dimensions
L438 x W394 x H44 mm
Mass (Main Unit)
3kg/6.6lbs

[phone] | [email protected] Page 7of 33 Copyright © Zenty AV

[phone] | [email protected] Page 8of 33 Copyright © Zenty AV

[phone] | [email protected] Page 9of 33 Copyright © Zenty AV
Channel
Button method
Input 1-4
1. Directly press the number key, such as input channel 1, and select
"1" to press (only when the output port is selected, the input channel
number will be valid)
2. Long press means all outputs select current input
Output 1-4
Directly press the number key, such as the output channel 2, press
button "2" and press it again to cancel the selection;
Long press output 4 to select all channels, and long press again to
cancel
MENU
Function Button; Enter the function option or back to previous option
ENTER
Confirm Button: enter function selection mode
UP
Button for UP option
DOWN
Button for NEXT option
PRESET
Preset, short press to quickly enter the preset call function
LOCK
Long press to LOCK, Long press again to UNLOCK
The signal switch includes 4 free switching channels, which can be configured as input/output
according to the requirements, forming a matrix of 1 x 4 ~ 4 x 1, which can switch any input.
Signal to 1 channel output or all channel output.
The specific operation as follows:

[phone] | [email protected] Page 10 of 33 Copyright © Zenty AV
Switch the input to the output
Operation format: "output channel" + "input channel"
For Example: Output port 2 switch to input 1
Operation: Press OUT number "2" + IN number "1" to complete the switch
The video interface has two sub menus:
1. Video Routing
2. Video On/Off

[phone] | [email protected] Page 11 of 33 Copyright © Zenty AV
1.Video Switch
Switch any output to one input or all outputs to the same input, default PTP.
①Select“Video”in the menu and press“ENTER
②Then use “UP””DOWN”button to select“Switching”
③Press“ENTER”enter next page
④Press “UP””DOWN”button to select the output（The fifth port means ALL）
⑤Press“ENTER”
⑥Press “UP””DOWN”to select the input
⑦Press“ENTER”，Switch Done

[phone] | [email protected] Page 12 of 33 Copyright © Zenty AV
2.Video On/Off
Turn on/off any output video or all outputs video
①Select“Video”in the menu and press“ENTER”
②Then use “UP””DOWN”button to select“On/Off”
③Press“ENTER”enter next page
④Press “UP””DOWN”button to select the output（The 9th port means ALL）
⑤Press“ENTER”to select the HDMI 1~4; HDBT 1~4
⑥Press “UP””DOWN”to select “On”or “Off”
⑦Press“ENTER”，Switch Done
The Audio Control have three sub menus:
1. Line Out
2. Audio Embed
3. Audio De-Embed
The specific operation is as follows:

[phone] | [email protected] Page 13 of 33 Copyright © Zenty AV
1. Line Out
HDMI output audio switch. You can select a channel of HDMI output to mute the sound of the TV
2. Audio Embed
Audio can be embedded to HDMI input. The embedded sound will cover the original sound of the
signal source. You can select any input to embed
3. Audio De-Embed
You can set the output audio (analog audio and coaxial audio) at the same time. You can choose a
certain audio output or mute

[phone] | [email protected] Page 14 of 33 Copyright © Zenty AV
Default EDID
Default1
4K60 444-LPCM: 2.0
FXN1234
Default2
4K60 420-LPCM: 2.0 FXN1234
Default3
4K30 444-LPCM: 2.0
FXN1234
Default4
1080P60 444-LPCM: 2.0
FXN1234
EDID Mode can set each input’s EDID. Includes: Default EDID; User EDID; Copy EDID; Copy HDBT
EDID.

[phone] | [email protected] Page 15 of 33 Copyright © Zenty AV
The PRESET interface can save the current video, audio, EDID, system Settings, etc., and supports 8
different scenes. Scenes can be modified and cleared through web pages, commands, and panels.
The default preset is consistent with factory Settings

[phone] | [email protected] Page 16 of 33 Copyright © Zenty AV
SETUP mode can set the device’s RS-232 baud rate, POC Switch, DHCP, Reboot, Factory Specific
operations are as follows

[phone] | [email protected] Page 17 of 33 Copyright © Zenty AV
It has 4 kinds of baud rates inside the device: 9600; 19200; 57600; 115200
Default Baud Rate is: 115200
①Select“Setup”in the menu and press“ENTER”
②Then use “UP””DOWN”button to select the “BAUD”and press “ENTER”
③Press “UP””DOWN”button to select the baud rate and press “ENTER”to confirm
On means Dynamic; Off means Static
①Select“Setup”in the menu and press“ENTER”
②Then use “UP””DOWN”button to select the “DHCP”and press “ENTER”
③Press “UP””DOWN”button to select“On”or“Off”and press “ENTER”to confirm

[phone] | [email protected] Page 18 of 33 Copyright © Zenty AV
The POC interface can select a certain HDBT output switch to control POC power supply, and the
default POC is "On"
Factory Run: Reset Video, Audio, EDID, Setup setting, Preset, Device name.
Factory User: Reset Video, Audio, EDID, Setup setting.

[phone] | [email protected] Page 19 of 33 Copyright © Zenty AV
Check the device information: IP or System information

[phone] | [email protected] Page 20 of 33 Copyright © Zenty AV
HDMI audio output supports uncompressed audio PCM, compressed audio Dolby and DTS, with a
maximum support of 7.1 sound channels and a maximum sampling rate of 192KHz.
Analog audio supports PCM 2.0 channel.
S/PDIF audio supports Dolby or DTS, 5.1 channel.