Zhone 4929 4929-A1-520 User manual

ADSL2+ 1U DSLAM w/ Modular Uplinks
4929-A1-530, 4929-A1-520, 4929-A2-530, 4929-A2-520
✓Plug 'n' play operation
and auto-configuration
✓Small enough to fit in any
remote terminal in ETSI
standard form factor for
19” and 23” racks
✓24 ports of ADSL2+ (ITU
G.992.5)
✓Modular, hot-swappable
media independent
backhaul using Uplink
Media Interface Modules,
MIM interface
✓NEBS compliant and
Environmentally
Hardened for remote
deployment
✓Compliant to ETSI
300-119-1-3
Environmental
Requirements
✓Built-in POTS voice splitter
to minimize space
requirements
Feature-rich ADSL2+ 1U DSLAM enables IP video from
the Remote Terminal/Street Cabinet in a native IP
Ethernet DSLAM supporting multiple network
connections
Zhone's 4900 series of ADSL2+ 1U DSLAMs are ADSL ITU G.992.5 compliant IP
DSLAMs, Ethernet based, environmentally hardened and small enough to fit in
even the most crowded Remote Terminals/Street Cabinets. The 4929 uses EAPS for
Ethernet ring topology support, for use with the IPD12000E DSLAM or other EAPS
devices.
The 4929 is extremely feature rich, including IGMP snooping for IP Video support,
SNMP Management, IP Traffic Management, enhanced security features, and up to
24 Mbps downstream bandwidth available on every port. Front loading,
hot-swappable uplink module options called Media Interface Modules are available
for installation into the DSLAM. MIMs include T1/E1, 100BaseFX, and 10/100
Ethernet for easy integration with other network elements as well as providing
easy upgrades as bandwidth requirements increase. In addition MIM uplink
options exist to add more Gigabit Ethernet Interfaces to the units
The 4929 interoperates with industry standard ADSL2+ modems over the local
loop while still preserving the benefits of a packet based architecture.
Simultaneous voice and data support allows providers to take advantage of line
sharing agreements and further reduces the cost of deploying the residential DSL
services such as High-speed Internet Access, Multicast Video (IP TV), Video on
Demand, Audio/Video streaming, Voice over IP, Gaming and LAN-to-LAN
connections that will increase the providers Average Revenue Per User (ARPU).
ADSL2+ is an ideal voice and data solution for residential use, supporting data
and POTS voice service over a single copper pair. By maintaining lifeline POTS,
the voice connection is never terminated in the event of power loss.
ADSL2+ provides the high-speed bandwidth required to deliver IP video from the
remote terminal.

Technical Specifications
ADSL2+ 1U DSLAM w/ Modular Uplinks
Dimensions
■Height 1U
■Width : 430 mm (excluding the mounting wings)
■Depth : 241mm (excluding the room for cabling)
Weight
■2.5 lbs. (1.1 kg)
Power
■DC: Dual -48 Volt DC terminal blocks
■Consumption: < 1.5 Amps
■AC: Requires separate AC power supply (sold
separately)
Interfaces
■Access ports
■24 ADSL2+ ports using RJ-21 connector (Annex
A)
■24 Splitter ports using RJ-21 connector (Annex
A)
■Uplink ports
■1 10/100/1000BT or fiber based (SFP) GigE port
for management or uplink
■1 RS232 Console port for RS-232 serial
management connection
■1 Media Interface Module (MIM) slot:
- 2 x Gigabit Ethernet (MIM-2000F)
- 2 x T1 (MIM-2T1)
- 2 x E1 (MIM-2E1)
- 4 x E1 (MIM-4E1)
- 4 x T1 (MIM-4T1)
- 10/100 Ethernet (MIM-10/100)
Standards Support
■IEEE 802.3
■IEEE 802.1p CoS
■IEEE 802.1Q VLAN
■IGMP Snooping - supports IGMPv 1 and IGMPv2
Protocol Support
■MTM Traffic Management - Configurable
Priority scheme 802.1p, DiffServ, IP address
range, Rate Limiting, Security
■IGMP snooping
■Enterprise MIBs “Chassis and Module
Identification, Configuration, IP Traffic
Management"
■IETF RFC1213 “Network Management of
TCP/IP-based internets: MIB-II”
■IETF RFC3440: “Definitions of Extension
Managed Objects for ADSL Lines”
■ITU-G.997.1: “Physical Layer Management for
DSL Transceivers”
■ADSL Forum Technical Report TR-024: “DMT
Line Code Specific MIB”
■Flash Upgradeable
Bandwidth/Distance
■Bandwidth: Maximum within ITU ADSL2+
standard
■Distance: up to 18,000 feet/7,500m (lower
speeds will be achieved at greater distances)
Regulatory Compliance
■NEBS: GR-63-CORE, GR-1089-CORE
■EMC: FCC Part 15; ICES-003; EN 300 386-2; CE
Marking
■Safety: UL1950, CSA C22.2 No. 950, EN60950,
IEC950, CE Marking
Operating Requirements
■Complies to ETSI 300-019-1-3 Environmental
Requirements
■Climatic conditions Classes 3.1 to 3.3
■Temperature: -40ºF to 149ºF (-40ºC to 65ºC)
■Non-operating temperature: -40ºF to 158ºF
(-40ºC to 70¼C)
■Humidity: 5% to 95%, non-condensing
■Altitude: -200ft to 16,600ft (-60m to 5,000m)
Ordering Information
4929-A1-520 ADSL2+ Annex A unit with no integrated splitter
4929-A1-530 ADSL2+ Annex A unit with integrated Annex A 900 ohm splitter
EPC-AC-2.5A-US Optional AC Power Supply, 2.5A, US plug
EPC-AC-2.5A-UK Optional AC Power Supply, 2.5A, UK plug
EPC-AC-2.5A-EU Optional AC Power Supply, 2.5A, EU plug
17 December 2010 11:30:01