Zigen ZIG-DA14-UHD-UHD User manual

! ! !
zigencorp.com Toll Free: 877-650-5252
International: [phone]!
ZIG-DA14-UHD –HDMI 2.0 –600 MHz
HDMI Distribution Amplifier w/HDCP
2.2 & WebOS
ZIG-DA14-UHD-UHD
USER MANUAL Ver. 1.0
August 2015

2
!
ZIG%DA14*USER*MANUAL!
! !!
Table of Contents
Copyright and Trademark 3
Introduction 4
Package Contents 4
Features 4
Specifications 5
Block Diagram 7
Dip Switch Settings 8
WebOS Interface 10
Basic Setup/Use 12
IP/RS-232 Command Syntax 13
Commands 13
Warranty 15

! ! !
zigencorp.com Toll Free: 877-650-5252
International: [phone]!
Copyright and Trademarks:
All rights reserved by ZIGEN, INC. No part of this document may be reproduced
in any form or by any means without written permission from the product
manufacturer. Changes are periodically made to the information in this
document. They will be incorporated in subsequent editions. The product
manufacturer may make improvements and /or changes in the product described
in this document at any time.
All the registered trademarks referred to this manual are belonging to their
respective companies.
Before You Begin
Follow all instructions marked on the device during using.
Do not attempt to maintain the device by yourself, any faults, please contact your
vendor.
▪Provide proper ventilation and air circulation and do not use near water.
▪It is better to keep it in a dry environment.
▪The system should be installed indoor only.
▪Only use the power cord supplied with the device.
▪Do not use liquid or aerosol cleaners to clean the device.
▪Always unplug the power to the device before cleaning.
▪Unplug the power cord during lightning or after a prolonged period of non-
use to avoid damage to the equipment.
!

4
!
ZIG%DA14*USER*MANUAL!
! !!
Introduction
HDMI 2.0 - 600 MHz HDMI distribution amplifier perfect for distributing high
bandwidth (2160P60 RGB/4:4:4) HDCP 2.2 content to up to 25 UHD displays
(cascading up to 8 units). Weather you need full bandwidth UHD content
distributed in a retail environment or home the DA14-UHD-UHD is for you.
Robust technology designed and engineered in the USA includes an Ethernet
port and WebOS for configuration, EDID management (15 EDID presets &
memory for more), and Firmware & Remote reset in a small footprint ½RU.
Package Contents
• 1 x ZIG-DA14-UHD-UHD
• 1 x 12V/1.25A DC Power Supply
• 1 x User Manual
Typical Applications –HDMI Splitter/Distribution
Amplifier for:
•Retail UHD content distribution
•High bandwidth computer gaming
•Home UHD content distribution
•Corporate UHD media distribution
•UHD signage
Features
• 600 MHz HDMI 2.0 (2160P60 4:4:4) and HDCP 2.2 on all I/O
• WebOS Control
• Cascade up to 8 hops –1 UHD source to 25 UHD displays
• Supports 48-bit deep color
• Supports digital video formats up to 4K UHD (2160P60 @4:2:0 pixel
format)
• Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby
TrueHD, DTS HD-Master Audio and more.
• Supports Rec. 2020 color space
• RS-232 Command Set for 3rd Party control

! ! !
zigencorp.com Toll Free: 877-650-5252
International: [phone]!
Specifications
Ports
Inputs
HDMI x 1
Outputs
HDMI x 4 –Can cascade up to 8 times
Control/Access
WebOS control via Ethernet port (http)
Telnet via Ethernet
Serial (terminal) via 9-pin RS-232 port
Copy Protection Compliance
HDCP – Signals with 2.2, 1.4 or none will pass – all ports
Video Bandwidth
18 Gbps
Video Timings
All HDMI 2.0 formats supported. Maximum 4096x2160 @ 60Hz 4:4:4/RGB
Audio
HDMI 2.0 Supported
Power Consumption
10 watts
Power

6
!
ZIG%DA14*USER*MANUAL!
! !!
12 VDC, 1.25A locking
Dimensions
½RU
Weight
1 pound
454 grams
Certifications/Compliance
FCC, HDBaseT, CE, RoHS, HDCP, HDMI
EDID Management
Advanced EDID management –15 presets and custom EDIDs can be loaded via
WebOS or RS-232

! ! !
zigencorp.com Toll Free: 877-650-5252
International: [phone]!
Block Diagram

8
!
ZIG%DA14*USER*MANUAL!
! !!
DIP Switch Settings
DIP 1: EDID
OFF (UP): As a default the downstream EDID is copied and used from
output port 1.
While DIP 1 is OFF (UP) DIP 2 & 3 are active as follows:
DIP 2: (OFF/UP) audio according to downstream capabilities
DIP 2: (ON/DOWN) audio is restricted to 2-channel regardless of
downstream EDID.
DIP 3: (OFF/UP) audio according to downstream capabilities.
DIP 3: (ON/DOWN) audio is modified for SPDIF maximum capabilities.
This ensures that the SPDIF output always outputs all SPDIF supported
formats.
DIP 2 overrides DIP 3. If DIP 2 is down, stereo is selected.
While DIP 1 is ON (DOWN) the EDID is selected using the WebOS
WebOS has 15 EDID tables to select from (more to come) for various use
cases (see screen shot below). Additionally via the WebOS and custom
EDID table can be loaded into the device. This gives maximum flexibility
as customers can load any EDID they want for the desired application.

! ! !
zigencorp.com Toll Free: 877-650-5252
International: [phone]!
Screen Shot – EDID Tables in WebOS
Note: While DIP 1 is ON (DOWN), DIPs 2 and 3 are not used.
DIP 4: Hot Plug Force
UP (OFF) – Hot Plug Detection (HPD) is normal
DOWN (ON) – HPD is forced active. In this mode the DA14-UHD does not
process HPD events from downstream to upstream (from the sink back to
the source). This speeds up the HDMI pipeline and can be very useful to
avoid a looping condition when multiple HDMI devices are connected in
series.

10
!
ZIG%DA14*USER*MANUAL!
! !!
DA14-UHD WebOS screenshot above