Zigen HXL-44Plus User manual

1 of 4
HXL-44Plus Quick Start Guide
QS-002-0001-000-00 | July 21, 2020
© 2020 Zigen Corporation
www.zigencorp.com
Read this quick start guide carefully before using the
product. Pictures shown in this document are for
reference only. Different models and specifications
are subject to actual product. Refer to HXL-44Plus
User Manual for more details on installing,
configuring, and operating the HXL-44Plus 4x4x8
HDMI 2.0 Switch.
Important Downloads
Download the latest documents from the product
page of the zigencorp.com website. The product page
contains the latest documents to ensure a successful
deployment of HXL-44Plus. Important documents
include:
 HXL-44PLUS Quick Start Guide
 HXL-44PLUS User Manual
Packing List
1x HXL-44Plus 4x4x8 HDMI 2.0 Matrix Switch
1x Universal 100-240 VAC, 24V/2.71A Power Supply
1x IR Remote Control
1x RS-232 Cable (male DB9 to female DB9)
2x Rack Mounting Ears
4x Plastic Cushions
1x Quick Start Guide
Overview
The HXL-44Plus 4x4x8 is an HDMI 2.0 Matrix Switch
with four HDMI Inputs, four HDMI Outputs (Scalable),
and eight Unbalanced RCA Audio Outputs. The unit
can be configured to connect any of the four inputs to
any outputs. The device supports video formats up to
4K UHD (up to 2160p60 @ 4:4:4) with support for
HDCP 2.2 or 1.4 content protection.
The HXL-44Plus Unbalanced RCA Left/Right audio
outputs are extracted from the selected HDMI inputs.
The RCA Analog Audio Outputs support 2 channel
Stereo only. To hear the analog audio, the EDID of the
selected HDMI input must be configured for 2 channel
Stereo. Audio from the HDMI Outputs support all
multi-channel surround sound formats including DTS,
DTS-HD, Dolby Digital, and Dolby Atmos.
The HXL-44Plus can be configured with the included
IR Remote Control to select any inputs to any
Audio/Video outputs. The unit can also be controlled
with a third-party control system (with proper
drivers) using bi-directional RS-232, IR, or Ethernet.
With Ethernet, the ZigNet full web interface allows
extensive device control including advanced EDID
management and system diagnostics.
Refer to the HXL-44Plus User Manual for more
information.
Connections
The HXL-44Plus video, audio, and control ports should
be connected first before applying power to the unit.
The use of professional grade cables is highly desired
for successful deployment. When viewing UHD 60p
4:4:4 or UHD 60p HDR 4:2:2, Zigen highly
recommends the use of 4K Premium certified HDMI
cables. Zigen offers these premium certified cables in
varying lengths from 3 meters to 9 meters.
HXL-44Plus
4x4x8 HDMI 2.0 Audio/Video
Matrix Switch
Quick Start Guide

2 of 4
HXL-44Plus Quick Start Guide
QS-002-0001-000-00 | July 21, 2020
© 2020 Zigen Corporation
www.zigencorp.com
Quick Start Guide
IR Sensor
This sensor is used for the IR Remote Control
(included). Aim the IR Remote Control in this window
when pressing the Remote Control buttons.
LCD Display
The LCD Display shows the menus and current
configuration of the unit.
Front Panel Buttons
The Front Panel buttons are used to locally control the
unit.
INPUTS: The four Input Buttons are associated with the
HDMI inputs 1-4. When an Input button is pressed, any
connected outputs will also be illuminated.
OUTPUTS: The four Output Buttons are associated
with HDMI outputs 1-4 or Analog Audio 1-8 (blue LEDs
for Audio 1-4, red LEDs for Audio 5-8).
VIDEO: The Video button configures the Input and
Output buttons for mapping HDMI Video.
AUDIO (Blue): The blue Audio button configures the
Input and Output buttons for mapping RCA Audio 1-4.
AUDIO (Red): The red Audio button configures the
Input and Output buttons for mapping RCA Audio 5-8.
ENTER: The Enter button is used to accept a selection
in the Menu shown on the LCD Display.
ALL: The All button is used to map all Video or Audio
Outputs to a selected Input.
UP/DOWN: The Up and Down buttons are used to
navigate the Menus shown on the LCD Display.
MENU: Pressing the Menu button will display the
configuration menus on the LCD Display.
EXIT: Pressing the Exit button will close the
configuration menus shown on the LCD Display.
HDMI Inputs
Connect the video sources to any of the four HDMI
Inputs, which corresponds to Input buttons 1-4 located
in the front.
HDMI Output
Connect displays or Audio/Video Receivers (AVR) to
any of the four HDMI Outputs, which corresponds to
Output buttons 1-4 located in the front. Any HDMI
output can automatically downscale a UHD (4K) video
source down to 1080p as required by the connected
display. See Operation for mapping instructions.
RCA Unbalanced Analog Audio Outputs
Connect an AVR or Audio Amplifier to any of the 8 RCA
outputs. The audio sources are extracted from any
HDMI Inputs 1-4 (2-Channel Stereo format). See
Operation for mapping instructions.
IR Input Connection
The IR Input Plug can be connected to an IR Receiver
(3-pin Jack, 5V) or any 3rd party Control System (2-pin
Jack). The pin out for the IR connectors are as follows:
1
3
2
7
8
10
HXL
-
44Plus
1
2
3
4
5
6
7
9
IR INPUT (2 or 3 pin support)
IR In
+5VDC
GND
IR In
GND
6
5
4

3 of 4 © 2020 Zigen Corporation
www.zigencorp.com
HXL-44Plus Quick Start Guide
QS-002-0001-000-00 | July 21, 2020
Quick Start Guide
Ethernet LAN Port
The Ethernet LAN port is a 100 Base-T connection to
any router, switch, or directly to a computer. The HXL-
44Plus features a web interface, called ZigNet.
Hardware configuration, EDID management, and
advanced diagnostics can all be accessed through
ZigNet. Use the Menu to display the IP Address of the
LAN port then use any web browser to access ZigNet.
Note: Refer to the HXL-44Plus User Manual for a
complete explanation of ZigNet.
RS-232 Connection
An RS-232 connection is typically connected to a 3rd
party control system to configure the HXL-44Plus. The
default settings are:
Baud Rate: 115,200
Data Bits: 8 | Stop Bits: 1
Parity: None
Flow Control: None
Note: Refer to the HXL-44Plus User Manual for a
description of the RS-232 control protocol.
Power
The HXL-44Plus requires 24VDC @ 2.71Amp to power
the unit. Use the included power adaptor and ensure
the locking ring is threaded snugly to prevent
inadvertent disconnection of the power jack. Make
sure all video, audio, and control ports are properly
connected before applying power to the HXL-44Plus.
Operation
To connect a Video Output to an Input, first press the Video Button. Next press the desired Input Button (1-4) and
then press the desired Output (1-4) to be connected. The pressed Input and Output buttons will momentarily flash
to confirm the new connection mapping. If the ALL button is pressed following an Input button, all outputs will be
mapped to the selected Input.
To connect Audio Outputs 1-4 to an extracted HDMI Input, first press the Audio Button until it illuminates blue.
Next press the desired Input Button (1-4) and then press the desired Output (1-4) to be connected. The pressed
Input and Output buttons will momentarily flash to confirm the new connection mapping. If the ALL button is
pressed following an Input button, all audio outputs will be mapped to the selected Input.
To connect Audio Outputs 5-8 to an extracted HDMI Input, first press the Audio Button until it illuminates red. Next
press the desired Input Button (1-4) and then press the desired Output (1-4), corresponding to Audio Outputs (5-
8). The pressed Input and Output buttons will momentarily flash to confirm the new connection mapping. If the
ALL button is pressed following an Input button, all audio outputs will be mapped to the selected Input.
Specifications
Video Connection
HDMI 2.0
b
Content Protection
HDCP
2.2
|
1.4
Maximum Video Resolution
4K60P UHD 4:4:4, 4K60P UHD 4:2:2 HDR
Maximum HDMI Bandwidth
17.82 Gbps
Color Space Support
RGB, YUV
YUV Subsampling
4:4:4, 4:2:2, 4:2:0
Full Color
Depth
8 bits, 10 bits, 12 bits
High Dynamic Range (HDR)
Dolby Vision | HDR10+ | HDR10 | HLG
Audio Format (HDMI Output)
7.1 Channel PCM,
DTS, DTS
-
HD,
Dolby Digital, Dolby TrueHD,
Dolby
Atmos
Audio Format (RCA Output)
2
-
Channel Stereo Only.
Note, noise may be heard on the RCA outputs if audio EDID is configured for
multichannel surround sound format (5.1, 7.1, Dolby Digital, DTS, etc.)
8
9
1
0
GND (5)
TX
(
2
)
RX
(
3
)
HXL
-
44Plus

4 of 4 © 2020 Zigen Corporation
www.zigencorp.com
HXL-44Plus Plus Quick Start Guide
QS-002-0001-000-00 | July 21, 2020
Quick Start Guide
Audio DSP (RCA Output)
Volume Attenuation, Tone Control Bass/Treble, 5
-
Band Equalizer, Equalizer
Presets, Surround Sound Effects, and Bass Enhancement
IR Remote Control

RS
-
232 Port

IR Input Port (
compatible with 2
-
pin Control System or 3-pin IR
Receiver Cable)

Ethernet Port

ZigNet Administration

EDID Management

Advanced
Diagnostics

CEC

Low Power Standby Mode

Power
24
VDC
@ 2.71A, Center pin hot
Dimensions
436.4mm x 44.0mm x 238.1mm | 17.18 inches x 1.73 inches x 9.38 inches
Weight
1.75 Kg
|
3.85
pounds
Temperature
0
°
to
4
0
°
C (10%
-
90% Non
-
Condensing Humidity)
| 32
°
to 104
°
F
Regulatory Safety and Emissions
CE | FCC | RoHS
Warranty Information
Powered Product Warranty
Zigen warrants its powered products against any defects in materials and workmanship for a period of three years
from the date of invoice. Touchscreen displays carry a one-year parts and labor warranty. If a malfunction occurs
during the warranty period, Zigen will repair or replace a product to its original operating condition. A return
authorization number must be obtained from Zigen before products are returned for service.
Non-Powered and Cable Products - Lifetime Limited Performance Warranty
Zigen warrants that its non-powered products and cable products will be free from defects in material and
workmanship for as long as you or your customer owns the product. All Zigen non-powered products and cables
are designed and engineered to meet and exceed performance specifications. If, at any time, the product fails due
to manufacturer defect, Zigen will repair or replace the product to ensure that it meets original performance
specifications. Reduced performance due to normal wear and tear, or damages caused by misuse or negligence
will not be covered. Zigen will test and evaluate all non-powered and cable products claimed defective. Products
must be shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return Merchandise
Authorization (RMA) number from Zigen. This statement of policy is in lieu of any other policy expressed or
implied and no representative or person is authorized to assume any other liability or adopt any other policy for
Zigen without our written consent.
Return Policy
If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less
shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only
be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a
Return Merchandise Authorization RMA number provided by Zigen.
HXL
-
44Plus