Zigen ZIG-POE-70 User manual

PDF provided by Conference Room AV
Zigen ZIG-POE-70 4K HDBaseT Transmitter & Receiver, HDMI 2.0, HDCP 2.2 - 230'

User Manual
ZIG-POE-70 TRANSMITTER
ZIG-POE-70 RECEIVE
Package Contents-
1 x Transmitter
1 x Receiver
1 x User manual
1 x Power adapter DC 48V with lock
1 x IR receiver
4 x Screws
8 x Foot pads
2 x Captive screw connectors
2 x Phoenix connectors
IR IN Cable
Features
Extend HDMI signals up to 70 meters/228 feet by using Cat-5e/6/7
Supports HDMI 1.4 with 3D
Supports HDMI 1.2 and 1.3
HDCP compliant 1.4 & 2.2
Supports 3D pass-through
Supports CEC pass-through
Supports RS-232 (Bi-direction transfer)
Supports all frequency band IR control (Bi-direction transfer)
Supports 12V or 5V IR Receiver/Emitter
Full HD support: 1080P@60Hz, 3D and 4Kx2K
HD-BaseT technology
Uses Cat-5e/6/7 cable for easy installation
ZIG-POE-70 HDMI
Extender

Specifications
Function
Transmitter
Receiver
HDMI IN
1 x HDMI type A
None
HDMI OUT
None
1 x HDMI type A
RJ-45 Connector
1
1
IR Terminal
Block 5 pin
1
1
IR OUT
3.5mm Stereo jack x 1
3.5mm Stereo jack x 1
IR IN
3.5mm Stereo jack x 1
3.5mm stereo jack x 1
Max Resolution
4K UHD 2160P60 4:2:0 (HDMI 1.4)
Cable Distance
70 meter
Power Adapter
DC 48V with lock
Housing
Metal
Weight
296g
.65 lbs.
303g
.67 lbs.
Dimensions
LxWxH
150x74x24mm
5.9x2.9x.95 Inches
TRANSMITTER/RECEIVER FRONT VIEW
1. IR 5-pin Terminal Block
2. IR OUT
3. IR IN
4. HDbaseT OUT Link (TX)
HDbaseT IN Link (RX)
5. TX ONLY POWER JACK 48V DC
TRANSMITTER REAR VIEW
1. POWER LED
2. LINK LED
3. RS-232
4. HDMI IN
RECEIVER REAR VIEW
1. POWER LED
2. LINK LED
3. RS-232
4. HDMI OUT

Installation
1. Be sure to turn OFF the HD source and HDTV.
2. Connect the HDMI extension cable between HD Source and HDMI In port
of the Transmitter.
3. Connect the HDMI extension cable between the HDTV and the HDMI Out
port of the Receiver.
4. Connect Cat 5e/6/7 cable between the Transmitter Link port and the
Receiver Link port of the Receiver.
5. Connect the Power adapter to the Receiver and power up the extender
6. Turn on the HD source and HDTV.
IR Receiver Cable Directions:
Plug the IR receiver into the ZIG-POE-70-RX “IR IN” port and place the IR
receiver so you can point to it easily with your IR remote controller.
IR Emitter Directions:
Plug any brand IR emitter into the ZIG-POE-70-TX “IR OUT” port and place
the IR sensor directly on the IR window on the front panel of the device
you intend to control.
Additional Options
1. IR Receiver Cable
HDMI Connector Signal Pin Out
Pin
Signal
Pin
Signal
1
TMDS Data 2+
11
TMDS Clock Shield
2
TMDS Data 2 Shield
12
TMDS Clock -
3
TMDS data 2 -
13
CEC
4
TMDS Data 1+
14
Reserved (N.C. on
device)
5
TMDS Data 1 Shield
15
SCL
6
TMDS Data 1 -
16
SDA
7
TMDS Data 0+
17
DDC/CEC Ground
8
TMDS Data 0 Shield
18
+5 power
9
TMDS Data 0 -
19
Hot Plug Detect
(HPD)
10
TMDS Clock +

RJ-45 Wiring Information & Coding
Looking into connector
Conductor
Identification
RJ-45 Plug Pin
Assignment
Color Code for
Conductor
Pair 1
5
White-Blue
4
Blue
Pair 2
1
White-Orange
2
Orange
Pair 3
3
White-Green
6
Green
Pair 4
7
White-Brown
8
Brown
3 Year Limited Warranty
Trademarks:
All the companies, brand names, and product names referred to in this manual are the trademarks or
registered trademarks belonging to their respective companies.
Certified extender
All rights reserved

ONE-TO-ONE SYSTEM CONNECTION EXAMPLE