Zippity LIBERTY LATTICE ZP19054 User manual

WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY INSTRUCTIONS ZP19054
WWW.ZIPPITY-OUTDOOR.COM
VER. 021221
ZP19054
ASSEMBLY
INSTRUCTIONS
15 MIN
Approximate assembly me for roof
Want to see a video on how to
assemble this product?
Scan the QR code
LIBERTY
LATTICE
OPTIONAL WINTER
COVER KIT


WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY INSTRUCTIONS
ZP19054
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
[email protected]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 9am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19054
on page 4. It is helpful if you can provide the batch lot which is a
stamped number inside the box.

this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please

return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY INSTRUCTIONS ZP19054
39 in
33 in
36 in
36 in
1 1/2 in

WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY INSTRUCTIONS
ZP19054
STEP 1: LAY OUT MATERIALS
A
C D E
BF
G
Front Frame (1)

Front Board (1)

Middle Board (1)

Back Board (1)

Side Frame

1” Self-Drilling Stainless
Steel Screw
2½” Self-Drilling
Stainless Steel Screw (4)

WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY INSTRUCTIONS ZP19054
STEP 2: INSTALL THE BOARDS
STEP 2.1
(B)
side frame as shown below.
Slide the Front Board (C) into the long slot in the side frame

Slide the tongue of the Middle
Board (D) into the groove of the

the middle board into the slot

back wall.
Slide the tongue of the Back Board (E) 

B
C
D
E
STEP 2.2
STEP 2.3
STEP 2.4


WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19054
STEP 3: SECURE THE FRONT FRAME
STEP 3.1
(F) into the side frame near the back board,
roughly one inch from the large hole in the side frame.
1.(A) so that it is at a right angle to the side frame as shown below.
2.(G) into the pre-drilled holes in the side frame.
1”
F
A
G
STEP 3.2
1 2

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS ZP19054
STEP 4: COMPLETE THE COVER
STEP 4.1
1.

the front frame.
2.
side frame.

roughly one inch from the large hole in the side frame.
1 2
STEP 4.2
1”

WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY INSTRUCTIONS
ZP19054
STEP 5: INSTALL THE COVER
STEP 5.1
(ZP19052). Turn

of the roof.

WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY INSTRUCTIONS ZP19054

WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY INSTRUCTIONS
ZP19054
WWW.ZIPPITY-OUTDOOR.COM
704-892-5222
877-234-6196
[e-mail]
6935 Reames Rd. Ste. K.
Charloe, NC 28216