Zippity NEWPORT VINYL PICKET FENCE User manual

www.zippity-outdoor.com 1
ASSEMBLY
INSTRUCTIONS
NEWPORT VINYL PICKET
FENCE WITH POST AND NO-DIG
STEEL PIPE ANCHOR KIT
60 MIN Approximate assembly
time of one fence panel
Ground
70 3/8 in
72 in
2 in
2 15/16 in
68 1/2 in
6 in
18 1/2 in
24 in
4 in
36 in
33 1/2 in
22 7/8 in
This fence can easily be trimmed



Want to see a video on how to

the code below!
Finishing Post Kit (ZP19003) sold
separately.
@
6935 Reames Rd. Ste. K. Charlotte, NC 28216
[e-mail]
704-892-5222 / 877-234-6196
zippity-outdoor.com


www.zippity-outdoor.com
2
GENERAL INFORMATION



IMPORTANT
• Please read through before starting assembly.
• Important: Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approximately 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
VISIT OUR WEBSITE FIRST, SO WE CAN HELP YOU RIGHT AWAY!
EMAIL:
WEBSITE:
[e-mail]
nychgroup.com/parts
PHONE: [phone]
To help you quickly and accurately, please have reference item number ZP19002
found on the next page. It is helpful if you can provide the batch lot which is a stamped number on the end of the box.
If you are having problems with the assembly or installation of this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
return the product, you will need to initiate the return from the company you originally purchased from.
Although great care has been taken to ensure proper packaging and handling of this product, occasionally problems occur.
If you discover any missing, damaged or defective parts, please visit our website to order replacement parts. If you experi-
ence any further trouble with your product, please contact our customer service department.
Customer service agents are available to take calls weekdays from 8am-5pm EST. If you
call outside of business hours, please leave a voicemail.

www.zippity-outdoor.com 3
STEP 1: LAY OUT MATERIALS
A
D
G H
E F
B C
Post Cap (1)
Rail Bracket (4)
Top Rail (1)
Pipe Anchor (1)
¾” Self-Drilling Stainless
Steel Screw (24)
Bottom Rail (1)
Picket (11)
Post (1)
⅞” x 3” x 29¾”
2” x 3½” x 38⅝”
1½” x 3½” x 68¼”
44¼”
1½” x 3½” x 68¼”
Note: Top rail has
picket holes on
both sides.

www.zippity-outdoor.com
4
STEP 2: INSTALL PIPE ANCHORS
STEP 2.1
STEP 2.2
After establishing the placement





Tool options for driving pipe anchor






Note: Check level in both
directions.
5lb Sledgehammer
Post Pounder
Hammer
10lb Sledgehammer
GOOD

BETTER

BEST

DO NOT USE

G

www.zippity-outdoor.com 5
STEP 3: INSTALL POST OVER PIPE ANCHOR
STEP 3.1 STEP 3.2
STEP 2.3
STEP 3.3



post to easily insert itself into the

Orient post (C) correctly with

over the pipe anchor and into the







Step 3.1 is only to be completed
if ground is hard



1
C
72 in.
70 1/4in.

www.zippity-outdoor.com
6
STEP 4 (OPTIONAL): SECURE POSTS TO PIPE ANCHOR
¼






Step 4 is only to be completed if you are concerned that someone may pull your fence posts out of
the ground.



Note: Remove vinyl burrs
with pliers if necessary.
Adjust until level.
Note: Ensure the screw is
driven into the center of the
pipe.
Top view
STEP 4.1
STEP 4.2
1
1
2
2
3

www.zippity-outdoor.com 7
STEP 5: INSTALL FENCE PANEL
STEP 5.1
STEP 5.2

󰀨


2 in
H
F
H
D

www.zippity-outdoor.com
8
STEP 5.3 STEP 5.4
STEP 5.5 STEP 5.6
Use a level on the top of the
bottom rail to determine where
to install the opposing rail

Temporarily remove the




Insert the bottom rail into








slide the top rail (E) into




18 1/2 in
E

www.zippity-outdoor.com 9
STEP 6.1
STEP 6.2


STEP 6: INSTALL PICKETS AND POST CAPS
1
Note: The tops of the
posts can be trimmed
down as necessary.
Use PVC glue (NOT
INCLUDED) to perma-
nently install post caps
as necessary.
Tip: Install one complete panel of fence rst. Then proceed to install one
or two pipe anchors at a time until you are accustomed to the process.
This will prevent repeated mistakes.
B
A

www.zippity-outdoor.com
10
STEP 7 (OPTIONAL): INSTALL BOTTOM RAIL BRACKET AT A 90°ANGLE
STEP 7.1
STEP 7.2
STEP 7.3



Note: Alternatively, you
can use self-drilling metal
screws (NOT INCLUDED)
for steel and avoid having
to pre-drill.
Step 7 is only to be completed if you wish to install your next fence panel at a 90°angle.