Zippity ZP19026 User manual

www.zippity-outdoor.com 1
ASSEMBLY
INSTRUCTIONS
ZIPPITY LIGHTWEIGHT
PORTABLE VINYL FENCE KIT
(42”H X 92”W)
30 MINApproximate assembly
time
Ground
92 in
44 1/2 in
2 5/8 in
6 in
29 1/2 in
42 in
46 in
40 7/8 in
This fence can easily be
trimmed down horizontally to
t your custom space. Use a
ne-toothed circular saw or
hack saw.
@
6935 Reames Rd. Ste. K. Charlotte, NC 28216
[e-mail]
704-892-5222 / 877-234-6196
zippity-outdoor.com
Want to see a video on how to
assemble this product? Scan
the code below!

www.zippity-outdoor.com
2
GENERAL INFORMATION
MISSING OR DAMAGED PARTS?
NEED ASSEMBLY HELP?
NEED TO RETURN?
IMPORTANT
• Please read through before starting assembly.
• Important: Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approximately 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
VISIT OUR WEBSITE FIRST, SO WE CAN HELP YOU RIGHT AWAY!
EMAIL:
WEBSITE:
[e-mail]
nychgroup.com/parts
PHONE: [phone]
To help you quickly and accurately, please have reference item number ZP19026
found on the next page. It is helpful if you can provide the batch lot which is a stamped number on the end of the box.
If you are having problems with the assembly or installation of this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
return the product, you will need to initiate the return from the company you originally purchased from.
Although great care has been taken to ensure proper packaging and handling of this product, occasionally problems occur.
If you discover any missing, damaged or defective parts, please visit our website to order replacement parts. If you experi-
ence any further trouble with your product, please contact our customer service department.
Customer service agents are available to take calls weekdays from 8am-5pm EST. If you
call outside of business hours, please leave a voicemail.

www.zippity-outdoor.com 3
STEP 1: LAY OUT MATERIALS
A
C
E
D
B
G
H
Post Cap (2) Top Rail (1)
Post (2) Picket (20)
1½” x 1½” x 91⅞”
⅞” x 1½” x 41½” ¼” x 1½” x 38⅜”
Bottom Rail (1)
1½” x 1½” x 91⅞”
Metal Foot (2)
¾” Self-Drilling
Stainless Steel
Screw (8)
Metal U-Joiner (2)
F

www.zippity-outdoor.com
4
STEP 2: ASSEMBLE FENCE FRAME
STEP 3: INSTALL METAL FEET
STEP 2.1
STEP 3.1
STEP 2.2
Position the top (B) and bottom (E)
rails as illustrated. Slide the two
posts (C) through the large routed
holes in the top and bottom rails
until the pre-drilled holes in both
rails are aligned with the pre-drilled
holes in the posts.
Secure the top and bottom
rails to the posts with (8) ¾”
self-drilling stainless steel
screws (H).
Insert the metal feet (G) into the bottom of both posts.
Note: The bottom rail only has
picket holes on one side.
Note: You may need to squeeze the metal
prongs together slightly for them to t inside
the posts.
Align holes
C
B
E
H
G

www.zippity-outdoor.com 5
STEP 4: INSTALL POST CAPS AND PICKETS
STEP 4.1
STEP 4.2 Insert each picket (D) down through the top rail and into the bottom rail.
Push the post caps (A) down over the top of the posts as illustrated. The post caps will
lock into place.
Note: The tabs on the bottom
of the pickets are designed
to go into the bottom rail and
lock into place.
D
A

www.zippity-outdoor.com
6
STEP 5: MULTIPLE FENCE PANEL INSTALLATION
STEP 5.1 To attach multiple fence panels to each other, bring the two ends close to each other, and
insert the metal U-joiners (F) through the pre-drilled holes on both the top and bottom
rails as shown.
90° application 45° application
F
@
6935 Reames Rd. Ste. K. Charlotte, NC 28216
[e-mail]
704-892-5222 / 877-234-6196
zippity-outdoor.com