ZippyYum SCANCASE User manual

SCANCASE
USER MANUAL
Models ZYGS004, ZYGS004-M
Updated: June 23, 2021
Android
Works with

2
USER
MANUAL
TABLE OF CONTENTS
About 3
Support 4
Features 5
Laser Safety 6
Compable Devices 7
Installaon & Removal 9
Installing the App 12
Pairing 13
LED Indicator 15
Surface & Internal Temp 17
Troubleshoong 18
Scanning Barcodes 21
Accuracy Check 23
Cleaning 25
Reset Procedure 27
Distance to Spot 28
Technical Specs 30
IP Rang 34
Warranty 37
Cercaons 38
FCC Compliance 39
IC Warning 40

3
USER
MANUAL
ABOUT
Scancase is an ultra-smart case
that turns your phone into a
powerful all-in-one device for
infrared and probe temperature
taking and barcode scanning.
Scancase’s probe arm is
compable with standard K-type
thermocouple connector probes.
An internal baery charged with
a standard USB-C connector
powers the case and also boosts
your phone’s baery.
Scancase models ZYGS003 and
ZYGS003-M are compable with
iOS devices only.
Scancase models ZYGS004 and
ZYGS004-M are compable with
Android devices only.
APPROVED USES
All models are food-grade, but
only models ZYGS003-M and
ZYGS004-M are rated for taking
a person’s forehead temperature
scan.

4
USER
MANUAL
SUPPORT
ZippyYum oers free support for
our hardware and apps.
ONLINE RESOURCES
If you need help with your
Scancase, please visit
www.zippyyum.com for support
resources including a knowledge
base.
IN-APP RESOURCES
You can also access the
knowledge base in the Help &
Support area from the main menu
of any ZippyYum app.
CONTACT US
To reach our support team, please
use the Help & Support area from
the main menu of any ZippyYum
app.
You can also email us at
[e-mail] or live
chat with us on our website.

5
USER
MANUAL
FEATURES
LED indicator
Reset buon
Barcode scanner
Laser indicator
Infrared sensor
K-type
thermocouple
probe jack
USB-C
charging port
Rotang arm

6
USER
MANUAL
LASER SAFETY
The ZippyYum Scancase contains a laser
compliant with FDA 21 CFR 1040.10,
subchapter J. Refer to the technical
specicaons for addional details. Every
device is tested for compliance with Class
II laser power limitaon.
WARNING!
The laser is acvated whenever
taking an infrared temperature.
Avoid directly exposing eyes to
Scancase’s laser as this may result
in eye damage.
Never point the laser at another
person. When using model
ZYGS003-M or ZYGS004-M to take
a person’s forehead temperature
the app will automacally disable
the laser.
Always keep Scancase out of
the reach of children and avoid
indirect eye exposure via reecve
surfaces such as glass and mirrors.
If Scancase is damaged, always
perform an accuracy check prior
to using Scancase for crical
temperatures.

7
USER
MANUAL
Scancase models ZYGS003 and
ZYGS003-M are compable with
the iPhone SE, iPhone 8, and
iPhone 7.
iPhone SE
iPhone 8
iPhone 7
Scancase models ZYGS004 and
ZYGS004-M are compable with
the UMIDIGI A3X Android phone
only.
UMIDIGI A3X
See page 41 for iPhone and Android device FCC and IC ID informaon.
COMPATIBLE DEVICES

8
01.
SETUP

9
USER
MANUAL
Scancase may be shipped with or
without a phone pre-installed.
You can install or remove a
compable phone by following
these steps.
Use the included screwdriver to
unscrew the 2 screws located on
the lower, rear panel of the case.
INSTALLATION & REMOVAL

10
USER
MANUAL
Next, slide the boom part of
Scancase down gently to separate
it from the top secon of the case.
INSTALLATION & REMOVAL
Slide down

11
USER
MANUAL
If removing a phone, gently unplug
the connector then slide the
phone out of Scancase.
If installing an phone, slide it
into Scancase and gently plug
Scancase’s connector into your
phone.
INSTALLATION & REMOVAL
Plug

12
USER
MANUAL
INSTALLING THE APP
Your ZippyYum Scancase must
be paired with the GoVentory or
GoTemp app on an iOS or Android
device before being used.
To install the app(s), tap below or
visit: www.zippyyum.com/apps
Once the GoVentory or GoTemp
app is installed, log into the app
using your login credenals.
Now you’re ready to pair.
TAP TO INSTALL

13
USER
MANUAL
PAIRING
MAC address
PRO TIP
Your scancase’s unique idener,
also known as its MAC address, is
printed on the back of the device
as shown below. You may need it
during pairing.

14
USER
MANUAL
PAIRING
The GoVentory and GoTemp apps
will automacally connect to your
scancase if only one scancase is
detected.
If there are mulple cases, you’ll
see a list of opons.
Available scancases will show as
“SCANCASE_##” with ## being
the last two digits of its MAC
address.
The LED indicator will blink once a
scancase is selected.
The ZippyYum Scancase will pair
automacally or prompt you for
a pairing code. If prompted, enter
code ‘123456’ in the app.
123456
“SCANCASE” would like to pair
with your device. Enter the pairing code
in your scancase’s user guide.
Bluetooth Pairing Request
Cancel Pair

15
USER
MANUAL
Scancase has an LED indicator
to show baery informaon and
pairing connecvity status to its
iOS device.
INDICATOR OFF
Power o, sleep
mode, or dead baery
RED LED
Baery crically low,
should be charged
ORANGE LED
Baery charging,
connue charging
GREEN LED
Baery charged,
ready to use
LED INDICATOR
IF FLASHING
Connected to iPhone
IF SOLID OR LED OFF
Not connected to iPhone

16
02.
TAKING
TEMPS

17
USER
MANUAL
Scancase’s infrared thermometer
measures surface temperature.
Make sure to mix items prior to
taking an infrared temperature to
get an accurate reading.
When internal temperatures are
more crical for items like meat
cooking on a grill, use Scancase’s
built-in probe to take an internal
probe temperature.
Cold Holding Example: Use your
free, gloved hand to mix or move
the top layer of veggies in a food
pan to get the internal temperature
using infrared.
Hot Holding Example: Use a spoon
to mix hot items like soups prior
to taking their temperature using
infrared.
Cooking Example: Use Scancase’s
built-in probe to check burger
paies on a grill.
SURFACE &
INTERNAL TEMP

18
USER
MANUAL
If your temperatures seem
o, please follow these
troubleshoong steps prior to
contacng our support team.
Start by throroughly cleaning
Scancase following the steps
outlined in this guide. A dirty
infrared lens is the most common
cause of inaccurate infrared
temperatures.
If mulple items are temping out-
of-range, verify your equipment
is turned on and set to the proper
temperature.
If taking infrared temperatures,
verify proper steps are being taken
to take internal temperatures by
following the instrucons on the
previous page.
When contacng ZippyYum
support be prepared to idenfy
why you beleive Scancase is not
funconing (like using another
thermometer to verify the
temperature, etc.)
TROUBLESHOOTING

19
USER
MANUAL
Make sure food is not covered,
Scancase can’t measure through
glass or plasc.
Steam, dust, smoke, and vapor can
obstruct Scancase’s sensors.
Avoid high humidity environments
with condensaon when using
infrared.
Avoid measuring reecve
surfaces (like aluminum wrapping)
unless a mae surface is on top
(like a label).
When a sudden change of
temperature occurs (like walking
into a freezer), Scancase may
need to be precondioned for
up to 15 minutes for accurate
temperatures.
Avoid angling Scancase for
infrared temperatures. Keep
Scancase perpendicular to the
measured surface for best results.
TROUBLESHOOTING

20
03.
SCANNING
BARCODES