ZKTeco TDM95 User manual

Quick Start Guide
TDM95
Version: 1.0
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between
the actual product and the written information in this manual.

1 Overview
1
2 Instructions
When a person places his/her wrist or palm in front of the
device within the specified distance the temperature and
distance measurement program is triggered and the
output is displayed.
When the temperature measured is within the normal
value range i.e. below 37.3°C, the green LED light turns on
for a second and the buzzer beeps once.
When the temperature measured crosses 37.3°C, the red
The temperature data is corrected by the blackbody before
delivery and is compensated to the temperature data of the
wrist temperature range (It is the temperature displayed on
the digital tube, also with the distance).
Operating instructions:
a.
b.
c.
1.
2.
This product is a non-contact electronic module that measures
the temperature of the human body. It returns the body
temperature of a person by measuring the heat radiation of
the palm or wrist, placed in front of the device within a
specified distance. The measured body temperature differs
sometimes when a person arrives from the extreme ambient
temperature. Thus it is recommended to wait for a while before
measuring body temperature for an appropriate result.

2
3 Features
Data
Synchronization
Accurate
Measurement
LED
Display
Dual
Temperature
Mode
One second
Measurement
Outdoor use:
Can be used in direct sunlight
LED light turns on for a longer time, and the buzzer also
beeps thrice. If the next temperature measurement is
triggered when the buzzer is already alarming, the
current high-temperature alarm is interrupted.
Measuring Range: 32.0°C to 42.9°C
Measuring Accuracy: ±0.3°C
Measuring Distance: 1cm-15cm.
d.
Communication:
RS232 / RS485 / USB Communication
Non-contact measurement:
1 ~ 15cm distance measurement

3. Service Life
3
4 Technical Parameters
1. Basic Parameters
2. Measuring Range
Accuracy
0.1°C (0.1°F)
Storage temperature
-20°C to 55°C
Operating ambient temperature
15°C to 38°C
Relative humidity
10% ~ 85%
Atmospheric pressure
70kpa ~ 106kpa
Power
DC 5V
Dimensions
114.98×89.97×32.2 (mm)
Weight
333g
Human body model temperature
measurement range
32.0°C to 42.9°C
Measuring distance range
1-15 cm
More Than 3 years.
4. Storage and Transportation Environment
1) Store in a well-ventilated room without corrosive gases.
2) Prevent drop or harsh jerk, vibration, rain and snow
splash during transportation.

5 Product Structure
Communication
Indicator
Status Indicator
Temperature Probe
Distance Sensor
4
Temperature
Trigger Distance
6 LED Display
Temperature
Indicator
Signal Sound
32.0°C to 37.3°C
Green
1 Short Tone
37.4°C to 43°C
Red
Beep10 times+ Red
Indicator

5
1. Please do not put this product near any living things to
avoid electric shock.
2. P
7Wiring
User Menu: Switch between Celsius °C and Fahrenheit °F.
Method: Long press + key to switch the display unit. Long
press E to save and exit.
The p o w e r su p pl y vo lta g e of TD M 95 is 5 V, t he
communication baud rate is 9600, and it supports three
communication modes.
USB Communication: Please use a standard micro USB
data cable.
Rear view

8 Packing List
TDM95
1
Quick Start Guide
1
Micro USB cable
1
RS232/RS485 USB cable
1
6
RS232 Communication: Use a customized USB cable for
power supply, connect to the RS232 port, and connect the
green line to RXD.
RS485 Communication: Use a customized USB cable for
power supply, connect to the RS485 port, connect the
green line to 485+, and connect the yellow wire to 485-.
RS485-
RS485+
TXD
RXD

ZKTeco Industrial Park, No. 26, 188 Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 - 82109991
Fax : +86 755 - 89602394
www.zkteco.com
Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.