Zoleo ZL1000 User manual

Global
Satellite
Communicator
Quick Start Guide
connected

connected
TABLE OF CONTENTS
Introduction
Device Overview
Getting Started
Device Features
Device LED Description
Quality of Service and Efficient Operation
Important Tips
3
4
5
10
13
16
17
2
IMPORTANT: See the Product Safety, Regulatory and Warranty
Information guide, in the product box for important information. The
User Manual is available at https://support.zoleo.com.

INTRODUCTION
Welcome to ZOLEO!
Thank you for choosing ZOLEO and welcome to seamless global messaging
via satellite, cellular and Wi-Fi.
What’s inside the box:
3

1. Power button
2. Check-in button
3. Message LED
4. Check-in LED
5. Power/Battery LED
6. SOS Button
7. SOS LED
8. SOS cover
9. USB port
10. USB cover
11. Label - SOS instructions
12. Lanyard
11
12
5
7
8
69
10
1
2
4
3
DEVICE OVERVIEW
4

1
2
3
GETTING STARTED
Activate your
ZOLEO device and
airtime plan
Install the
ZOLEO App
Charge your ZOLEO
device
5

STEP 1- Charge your ZOLEO device
Connect the USB charging cable to the ZOLEO device and adapter*.
Plug in. When finished, close the USB cover for a water-resistant seal.
Tip: While charging you can begin setting up your ZOLEO plan..6
*Adapter not included

IMPORTANT: You’ll need to add two (2) SOS contacts when you
activate your account.
https://www.zoleo.com/activate
STEP 2- Activate your ZOLEO device and airtime plan
Go to:
7
Info required to activate:
• Personal contact information
• Emergency contact information x 2
• Check-in contact information x 1
• Valid email address
• Credit card information
• ZOLEO IMEI and serial number from device label

ZOLEO
1:53pm
50%
CHATS ZOLEO SETTINGS
ZOLEO
STEP 3- Install the ZOLEO App
1) Search ‘ZOLEO’ on the App Store or Google Play and install the
application to your smartphone/tablet.
2) Turn on your ZOLEO device.
3) Pair your smartphone/tablet with your ZOLEO device via
Bluetooth by navigating to the ZOLEO tab in the app. This may
also prompt you to update your firmware, which ensures optimal
performance.
Google Play App Store
8
Power ‘ON’ Pairing via Bluetooth from app

connected
SOS
Setting up your smartphone/tablet (con’t)
4) Once paired, you can send/receive messages from the ZOLEO App.
Refer to the User Manual for info on using the Messaging, SOS,
Check-in, Weather and Location features of the app.
5) ZOLEO also sends/receives messages via Wi-Fi and cellular
connection when available.
9

I’m OK. My location is -32.920577,
141.149943
Sun, 10 Feb 12:14 PM
1) Press and hold the
Check-in button
until the Check-in
LED has changed.
Send Check-in message
Note: Refer to page 13-15 for detailed LED descriptions.
2) All LED’s will spin
green and send a
check-in message.
3) Device will emit
an ascending tone
when check-in
message is sent.
DEVICE FEATURES
10