Zonet ZUN2200 User manual

1
2 Ports USB 2.0 CardBus
Quick Installation Guide
P
Pa ac ck ka ag ge e C Co on nt te en nt t
˙ One 2 Ports USB 2.0 CardBus
˙ One Quick Installation Guide
˙ One Installation CD
˙ One USB cable (USB 2.0 or USB 1.1 cable)
D
Dr ri iv ve er r I In ns st ta al ll la at ti io on n
◎
◎◎
◎ Windows 2000/ XP/ Vista
1. he operating system will automatically detects the hardware and installs driver files when
a USB adapter is plugged into your notebook computer’s PCMCIA CardBus slot. After the
computer finished installing all necessary files, you will see a message “Your New
Hardware is now installed and ready to use.” on the system tray.
2. If your notebook computer does not detect and/or install the driver files automatically,
please follow Windows 98SE ME section Step 2. his will install all necessary files
from the Installation CD for you.
◎
◎◎
◎ Windows 98SE/ME
1. Plug-in the USB adapter into your notebook computer’s PCMCIA CardBus slot before driver
installation.
2. Insert the Installation CD into your CD-ROM drive and double-click the setup program,
SE UP.exe. he following screen will appear on your screen. Click “Next”.
All manuals and user guides at all-guides.com
all-guides.com

2
3. Select “Install USB Driver” and click “Next”. All necessary files will install to your computer
automatically.
4. Select “Yes, I want to restart my computer now.” And click “Finish”. his will finish the
driver installation and restart your system. Note: You must restart your computer after
the installation is finished; otherwise, the hardware will not work properly.
12-086-00737 Rev:01
All manuals and user guides at all-guides.com