Zonet ZEW2545 User manual

All manuals and user guides at all-guides.com
all-guides.com

Copyright Statement
is the registered trademark of Zonet Technology Inc. All the
products and product names mentioned herein are the trademarks or registered
trademarks of their respective holders. Copyright of the whole product as
integration, including its accessories and software, belongs to Zonet Technology
Inc. ithout the permission of Zonet Technology Inc., any individual or party is
not allowed to copy, plagiarize, imitate or translate it into other languages.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
1
Table of Content
Chapter 1. Introduction……………………………………………………………2
1.1 Welcome…………………………………………….…………………………2
1.2 Product Feature…………………………………………………………………2
1.3 Content of Package……………….…………………….……………………2
Chapter 2. Installation…………………………………………………………………3
Chapter 3. Configuration………………………………………………………..……
3.1 Station Mode…….………………………………………………………..……
3.1.1 Link Status…….……………………………………………………..……7
3.1.2 Site Survey...………………………………………………………………7
3.1.3 Profile………………………………………………………………..…...8
3.1.3.1 Add/Edit Profile…………………………………………......……9
3.1.4 Statistics……………..……….…………………………………………10
3.1.5 WPS Setting………………........………………..………………11
3.2 AP Mode………………..…....……………………………….…………..12
3.2.1 Basic Setting…………..…………………………………………….….12
3.2.2 Security Setting……………..………………………...………..……13
3.2.3 Access Control…………..…………………………....………………14
3.2.4 About…......…..…..………….…………………………………………14
Chapter 4. How to connect with PSP………………………………………….15
4.1 Configure PSP with Ad-Hoc mode……………………………….………15
4.2 Configure Xlink Kai…………………………………………………………17
Chapter 5. Product Specifications………….........................……………….18
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
2
Chapter 1 Introduction
1.1 Welcome
Thank you for purchasing Zonet ZE 2545-802.11n wireless USB adapter.
ZE 2545 connects you with IEEE802.11n(Draft 2.0) networks at receiving rate
up to an incredible 150Mbps! By using the reflection signal, 802.11n's “Multiple
In, Multiple Out” (MIMO) technology increases the range and reduces “dead
spots” in the wireless coverage area.
Soft AP supported by ZE 2545 can help you establish wireless LAN networking
with lowest cost. Besides, PS ( i-Fi Protected Setup) simplify the security
setup and management of i-Fi networks. Supports MM for Multimedia
Applications with Quality of Service in i-Fi® Networks. Especially supporting
PS3, PSP, Nintendo DS and ii connections with Xlink Kai will be your best choice
to enjoy on-line gaming.
1.2 Product Feature
Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g and IEEE 802.11b
standards
Provides USB2.0 port
Provides 150Mbps receiving rate and 150Mbps sending rate
Supports 20MHz/40MHz frequency width
Auto-
detects and changes the network transmission rate
Provides two work modes: Infrastructure and Ad-Hoc
Supports Soft AP to establish your wireless LAN networking
supports PS3, PSP, ii and Nintendo DS connecting with Internet and
Xlink Kai to enjoy on-line gaming
Supports 64/128-bit EP, PA, PA2 encryption methods and 802.1x
security authentication standard
PS ( i-Fi Protected Setup) simplify the security setup and management
of i-Fi networks.
Supports MM for Multimedia Applications with Quality of Service in
i-Fi® Networks
1.3 Contents of Package
One ZE 2545
One Installation CD w/User Manual
One Quick Installation Guide
Contact your local authorized reseller or the store purchased from for any items
damaged and/or missing.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
3
Chapter 2 Installation
NOTE: Snap-shot screens of the following installation procedure are based on Windows
XP. Installation procedures will be similar for other windows operating systems.
1. Insert ZE 2545 into a USB slot of your computer.
2. Select Cancel when “Found New Hardware” window appears.
3. Insert Installation CD to your CD-ROM drive. B r owse CD and double-click
setup.exe in Driver folder to execute it. The wizard will run and install all
necessary files to your computer automatically.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
4
4. Click Next to start installation.
5. Click Change… to select the path, or click Next to continue.
All manuals and user guides at all-guides.com
all-guides.com

802.11n ireless USB Adapter
5
6. During the installation, the following dialogue may appear. Click Continue
Anyway to continue.
7. Click Finish to complete the software installation.
You will see a tray icon appear in your system tray at the bottom of the
screen after the software and hardware installation completed successfully.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
6
Chapter 3 Configuration
Double-click the tray icon to launch the configuration utility.
3.1 Station Mode
Station Mode is the default access mode for ZE 2545.
In this mode, ZE 2545 serves as a client to receive the wireless signals to access
the Internet.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
7
3.1.1 Status
Status tab shows detail information about the current connection.
3.1.2 Site Survey
Under Site Survey tab, you will know information of all surrounding wireless
networks from the last scan.
Click Refresh to update and refresh.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
8
3.1.3 Profile
Profile can keep your favorite wireless setting among your home, office, and
other public hotspot. You may save multiple profiles and activate the one at your
preference.
 Connect: to make an existing profile become active and to connect
 New: to create a new profile
 Modify: to edit/modify/change parameter of an existing profile
 Delete: to delete an existing profile
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
9
3.1.3.1 Add/Edit Profile
a. Site Status
b. Security Setting
All manuals and user guides at all-guides.com
all-guides.com

802.11n ireless USB Adapter
10
3.1.4 Statistics
Statistics tab displays the detail counter information based on 802.11 MIB
counters. This page translates that MIB counters into a format easier for user to
understand.
 Clear: to renew the statistics.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
11
3.1.5 WPS Setting
PS Setting tab supports the configuration setup using PIN configuration method
or PBC configuration method.
PS( i-Fi Protected Setup) simplify the security setup and management of i-Fi
networks.
 PIN: Enter the Pin code and click PIN to automatically connect ZE 2545
with wireless devices around.
 PBC: Click PBC to complete auto-check and connections between ZE 2545
and other wireless device.
 Renew: Click to update the Pin code.
 Rescan: Update information on surrounding wireless network.
 Connect: click to connect the PS wireless network.
 Disconnect: to disconnect the connected wireless network.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
12
3.2 AP Mode
The device also can serve as an access point to transmit wireless signals and
create wireless network, allowing other wireless clients to access the network.
3.2.1 Basic Setting
Basic Setting tab configure the AP’s basic parameters, including SSID, ireless
Mode and Channel.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
13
3.2.2 Security Setting
Use Security Setting tab to make different security configurations of wireless
communication, and you can choose the authentication type or encryption type.
Note:
1. The Hex characters include 0~9 numbers and a~f letters.
2. ASCII characters include any numbers/letters and characters.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
14
3.2.3 Access Control
Choose Access Control tab to start MAC control. Access control includes All
Permitted and All Blocked. After editing the MAC address access list, only the
MAC in the Allow All list could access ZE 2545.
3.2.4 About
About tab displays the information about ZE 2545.
All manuals and user guides at all-guides.com
all-guides.com

802.11n ireless USB Adapter
15
Chapter 4 How to connect with PSP
4.1 Configure PSP with Ad-Hoc mode
a. Select Network Settings on PSP
b. Select Ad-Hoc mode on PSP
c. Select Channel on PSP
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
16
d. Scan PSP in ZE 2545 Utility Interface and click Connect to connect the
wireless network.
e. In Site Survey check ena le PSP connection mode checkbox.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
17
4.2 Configure Xlink Kai
Select Start →
→→
→ All programs →
→→
→ Xlink Kai Evolution VII →
→→
→ Start Kai Config to
configure the user name, password and other parameters.
Login Xlink Kai
Select Start →
→→
→ All programs →
→→
→ Xlink Kai Evolution VII → Start Kai. PSP will
connect with Xlink Kai automatically. The following window will indicate the
connection is established well now.
All manuals and user guides at all-guides.com

802.11n ireless USB Adapter
18
Chapter 5 Product Specifications
Specifications:
Standards IEEE 802.11n(Draft 2.0), IEEE 802.11g,
IEEE 802.11b
Interface USB2.0
OS indows 2000/ XP/ Vista
Frequency Range 2.412GHz~2.484GHz
Maximum Output
Power
18dbm
Input Voltage Range
(VAC)
5V
Output Voltage
Range(VDC) 1.5V/3.3V
Max. Consumption 0.6
Antenna type printed antenna
Channels:
11 Channels (USA, Canada)
13 Channels (Europe)
14 Channels (Japan)
Operating Temperature 0ºC ~ 40ºC
Storage Temperature -40ºC~70ºC
Operating Humidity 10%~ 90% RH Non-condensing
Storage Humidity 5% ~ 90% RH Non-condensing
Dimension(L x x H) 62.5 x 19 x 7.9 mm
eight 9.2g
11b 11 Mbps/5.5 Mbps/2 Mbps/1 Mbps
11g 54 Mbps/48 Mbps/36 Mbps /24 Mbps/18 Mbps/
12 Mbps/9 Mbps/6 Mbps
speed
11n
40MHz:130Mbps/117Mbps/104Mbp/78Mbp/52Mbp/
39Mbp/26Mbp/13Mbp
20MHz:65Mbp/58.5Mbp/52Mbp/39Mbp/26Mbp/
19.5Mbp/13Mbp/6.5Mbp
All manuals and user guides at all-guides.com