Zoom NUD360-F User manual

Installation Manual Rev.1.5
High Resolution 360° Network Camera
Model: NUD360-F
Contents
1. Introduction.......................................................................................2
2. Safety Instructions............................................................................4
3. Installation Requests ........................................................................5
4. Package Contents ............................................................................7
5. Physical Description .........................................................................8
6. Installation of Camera.....................................................................10
7. Other Connections..........................................................................16
8. How to Install / Remove the Memory Card ....................................21
9. Connect Camera to Network..........................................................23
10. Accessing the Camera..................................................................24
Thank you for purchasing the ZOOM product.
Please read this manual carefully and use it correctly and safely.
Please read "Safety Instructions" before use.
Please keep this manual in a safe place.
Product operation and setting methods are described in the IP Utility and Web Configurator
instructions that are included in the CD-ROM provided with the product.
Note: In order to read the PDF file, Adobe Reader of Adobe Systems Corporation is
necessary. © ZOOM Co., Ltd. 2016

2
1. Introduction
This is the installation manual for the high resolution 360 ° network camera NUD 360-F.
Product Summary
This device is a surveillance camera equipped with a 10BASE-T / 100BASE-TX terminal
(network terminal) for the network.
By connecting a network such as LAN (Local Area Network) or the Internet to this device, you
can check the video and sound of the camera with PC (personal computer) on the network.
Note: When checking the camera image on the PC, it is necessary to set the PC's network
environment. In addition, please install a web browser for the Internet in advance on the PC.
Key Features
Newly designed fringe priority fisheye lens is installed, achieving high resolution in all
directions of 360 degree. A great improvement of the resolution of long-distance images
that other conventional fisheye cameras were not good at.
12.4 Mega pixel color CMOS sensor is implemented. 9 Mega H.264, 18 fps, 4 Mega H.264,
30 fps streaming output is possible.
The camera body is full of intelligent functions such as motion detection and provides a
variety of monitoring methods.
Equipped with a SD memory card slot, you can save movies and still images.
Dust-proof and water-proof dome housing conforming to IP66 is adopted.
About immunity
This camera was created for the purpose of obtaining images to monitor for a specific
area. This camera alone does not prevent crime or the like.
We do not assume any responsibility with regard to the followings in any case.
①Accidental, special or consequential damages / injuries / harms caused directly or
indirectly in relation to this device
②Inconvenience, damage or harm to the device caused by user’s misuse or inadvertent
failure.
③Any malfunction or defect of the device, if the disassembling, repairing or remodeling of
this device is done by a user, irrespective of whether or not caused by it.
④Inconvenience, damage, or harm caused by impossibility of displaying images due to
any cause or reason including failure / malfunction of this device.
⑤Malfunction of the device, or inconvenience, damage or harm caused as a result by
connecting with third party’s equipment.
⑥Any indemnification claims or complaints due to reasons such as infringement of privacy
by individuals or organizations who became subjects as a result of surveillance video
(including records) taken by the user being publicized or used.
⑦The registered information content will be lost due to some reason.
Every reasonable care has been taken during the writing of this manual. Please inform
your local office if you find any inaccuracies or omissions.

3
We are not responsible for accidents or damages caused by constructions not described in
this manual or instruction manual, or by a method not using specified parts. Also, if a
failure occurs due to its construction, it will be out of warranty for the product.
We will not be held responsible for any typographical or technical errors to the product and
manuals and reserves the right to make changes without prior notice.
About protection of personal information
Information that can be identified by the person himself / herself photographed in the system
using this camera falls under the "personal information" stipulated in the "Personal Information
Protection Law". Please handle image information properly according to the law.
About trademark and registered trademark
Microsoft, Windows, Windows VISTA, Windows 7, Windows 8, Windows 10, Internet
Explorer are registered trademarks or trademarks of Microsoft Corporation in the United
States and other countries.
We are using screen photos according to the guidelines of Microsoft Corporation.
Windows's official name is Microsoft Windows Operating System.
Adobe, Adobe Reader, Acrobat Reader, and Adobe Active X are registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and other countries.
SD logo, SDHC logo and SDXC logo are trademarks of SD-3C, LLC.
WiMAX is a trademark of WiMAX Forum.
QuickTime and Safari are registered trademarks or trademarks of Apple Computer, Inc. in
the United States and other countries.
Other company names, product names and logos described in this manual are trademarks
and registered trademarks of each company.
About copyright
Copying, disassembling, decompiling, reverse engineering, assignment of software included in
this product is prohibited. Also, exporting acts in violation of export laws of all software
included in this device are forbidden.
Networking precautions
As this device is used by connecting to the network, it is expected to suffer damages as follows.
①Information leakage or flow out via this device
②Interruption or stop of this device by a malicious third party
③Illegal operation of this device by a malicious third party
In order to prevent such damages, under the responsibility of the user, please fully implement
the network security measures including the following measures.
When using this device on a system to which a PC is connected, check that checks and
disinfections against infections of computer viruses and malicious programs are performed
at regular intervals.
Use this device on a secure network using a firewall or the like.
To protect against unauthorized attacks, set a user name and password and limit the users
who can log in.

4
Implement countermeasures such as restricting access by user authentication so as not to
leak image data, authentication information (user name, password), alarm mail
information, FTP server information, DDNS server information etc. on the network.
Always close all browsers after accessing this device with an administrator.
Do not install the unit in such a location that the unit, cables etc.
2. Safety Instructions
Cleaning
Disconnect this device from the power supply before cleaning.
Accessories and Repair Parts
Use only the accessories and repair parts recommended by the manufacturer. Using other
attachments not recommended by the manufacturer may cause hazards.
Installation
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a
dry place protected from weather.
Servicing
Do not attempt to service this device yourself. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this device from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
When the power-supply cord or plug is damaged
If liquid has been spilled, or objects have fallen into the device.
If the inner parts of device have been directly exposed to rain or water.
If the device does not operate normally even by following the operating instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as improper
adjustment of other controls may result in damage, and will often require extensive work by
a qualified technician to restore the device to its normal operation.
Safety Check
Upon completion of any service or repairs to this device, ask the service technician to
perform safety checks to determine if the device is in proper operating condition.

5
3. Installation Requests
About Power Supply
This unit does not have a power switch.
To turn off the power to the camera, turn off the 12 VDC power supply or the PoE power
supply device.
During the installation, please ensure to make it possible to turn on / off the camera
power. When you connect the power cable to the power supply, the camera turns on.
Be sure to disconnect the power cable from the main power supply when cleaning or
maintenance.
About the installation place of the camera
Please consult well with the dealer you purchased or the specialized installation contractor
about the place to install the camera. Please choose well durable walls or ceiling etc.
Please install it on a ceiling (concrete ceiling etc.) or fittings with sufficient strength.
Please install in the base part of the building or the part with sufficient strength.
Please do not install on a gypsum board or wooden portion because strength is weak.
When installing it unavoidably, please provide sufficient reinforcement.
Keep the lens out of direct sunlight.
Installation and use in the following places is not allowed
Although this unit meets IP66 waterproof specifications, internal electronic components may be
damaged under the following circumstances, and it can not be guaranteed.
Where to use drugs such as pools
Places where special environments such as solvents and flammable atmospheres occur
Where radiation, X-rays, and powerful radio waves and magnetic fields occur
Places where corrosive gases are generated at sea or coastal streets, in salt-containing
environments
Location beyond the operating temperature range
Places subject to vibration
About installation of low temperature environment
The camera can be used even in low-temperature outdoor environments up to -20 ° C, but
in severe environments below -10 ° C, snow and frost adhering to the camera may not be
thawed.
When installing and starting up in an environment of -10 ° C or lower, normal images may
not be obtained immediately after startup. In this case, please wait for about 2 hours after
turning the power on, turn off the power and turn on the power again.
About installation of the camera
Please note the following points when installing.
Anchors, screws, bolts and nuts to be used when installing the camera to a ceiling or wall
are not included. Please use the reliable ones according to the structure and material of
the installation place.

6
Tighten firmly according to the material and structure of the installation place, based on
installing with bolts and nuts.
Do not use the impact screwdriver to tighten the screws. It may cause screws to be
damaged.
Tighten the screw straight. After tightening, please visually confirm that it is firmly
tightened without rattling.
Do not loosen or remove the screws on the outside of the camera. It may cause damage
due to immersion and fall accidents. Also, please tighten firmly even when loosen.
About care and maintenance
In order to use the device safely and correctly, please do routine maintenance and periodic
inspection by dealers or contractors.
If the lens cover becomes dirty, wipe gently with a soft cloth impregnated with a mild
detergent. In that case, please do not rub the lens cover strongly or wipe with the solvent.
When using the projector at a high altitude, in order to prevent injuries and accidents
caused by falling, check the following conditions on a daily basis.
The device is left without using.
⇒
To prevent accidents, be sure to ask dealers
or contractors to remove it.
The installation screws are loose or missing.
The installation place is loose or inclined.
There are damaged or marked rust in the
device or the installation place.
⇒
To prevent accidents, be sure to ask dealers
or contractors to repair it if necessary.
When using beyond 8 years, please consider the replacement as well as increasing the
number of periodic inspections.
If you are using the device for many years, there may be a possibility that the parts may
be deteriorated depending on the use environment and leading to breakdown or accident,
even if there is no abnormality on the appearance. Please check the following situation on
a daily basis.
Please immediately stop using the device in the following situation. Please turn off the
power and ask the dealer or contractor to inspect, repair or remove in order to prevent
breakdown or accident.
Smoke, smells and abnormal sounds come out.
The power cord, power plug, and AC adapter are abnormally hot. Or there are cracks
and scratches.
If you feel bilberries and electricity by touching the device.
Even when you turn on the power, no image or sound comes up.
Other abnormalities or malfunctions.
Always ask the dealer or a special contractor for construction. Failure to do so
could result in fire, electric shock, injury, damage to the equipment.

7
4. Package Contents
Check if the camera package comes with the following items.
Camera
Cable Gland
Conduit Gland
Terminal Block
(for Power)
Terminal Block
(for DI/DO)
Terminal Block
(for Audio In/Out)
Hexagon Screwdriver
Quick Installation Guide
Drill Template
Application CD
IMPORTANT: When the camera is taken out from the box, the lens cover is covered by a plastic
thin film. To avoid scratches or leaving fingerprints on the lens cover, it is recommended to retain
the film covering the lens cover until the camera is completely installed and all connections are
completed. However, the plastic has been removed on some of the pictures in this documentation
to show clarity of the procedures being described.

8
5. Physical Description
NUD360-F
<Appearance> <Bottom View>
Item
Description
1
Body
IP66, water-proof, particle-proof, aluminum die-cast
2
Lens Cover
Protects the lens. (Initially, this is covered by a thin film.)
3
Light Sensor
Detects a light volume for switching day/night mode.
4
IR LED
18 pcs of IR lights. (invisible wave length)
5
Top Case
Aluminum die-cast
6
Cable Hole (side)
Be used when pulling the cable out from the side. When
shipped, a black plastic cap is inserted for dustproofing.
7
Installation Screw
Hole
Using these holes (x4), install the camera.
8
Top Case Screw (x3)
Fix Top Case to Bottom Case. Its head has a special shape.
Use the included Hexagon Screwdriver.
9
Installation Plate
When installing the camera, fix this plate.
10
Camera Fixing Screw
Be fixing Installation Plate to Body. Never loosen or remove
these.
11
Cable Hole (bottom)
and Cable Hole Cap
Together with the waterproof ring, please attach either to the
side hole or the bottom hole, on the side not using. (It is
attached to the bottom at the time of shipment.)
3
２
1
5
8
7
６
9
11
10
４

9
<Inside View>
Item
Description
1
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes. Refer to the page 21 “Install the Memory
Card”.
Note: Supports only MicroSDHC and MicroSDXC cards.
2
Audio Input /
Output
Connects to audio input and output devices, such as
microphones and speakers.
3
Digital Input /
Output
Connects to digital input or output devices, such as an alarm
trigger, panic button, etc. Digital Input (DI) / Digital Output
(DO) devices are used in applications like motion detection,
event triggering, alarm notifications, etc.
4
Reset Button
Restores the factory default settings of the camera. To reset
the camera, while the power is on, press and hold Reset
Button for at least 5 seconds.
5
DC 12V Power Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to
an external power adapter.
6
Ethernet Port
Connects to a network using an Ethernet cable.
7
Fall Prevention Wire
Being connected to Body, this prevents Top Case from falling
when Top Case is removed.
1
3
6
5
4
2
7

10
162mm
162mm
Screw Hole
(φ4.5mm x 4)
Cable Hole
(φ45 mm)
6. Installation of Camera
Follow the steps below to install the camera.
Note: When installing, select a sufficiently strong wall or ceiling surface with consulting with
your purchased dealer or the special installation contractor frequently.
Note: Please carefully read "Safety Instructions" and "Installation Requests" and handle them.
Step 1: Decide how to route the cable
Before drilling the holes on the ceiling or wall, please
check the cable pullout position.
Depending on how the cables will go along the ceiling
or wall, decide whether to put the cable out from the
side of the camera or from the bottom.
If you want the cable to go along the surface of the
installation place, take out the cable from the side of
the camera.
When routing the cable inside of the installation place
by penetrating the installation surface, take out the
cable from the bottom of the camera.
Note: There is only one Cable Hole Cap attached on
the camera. Please attach it to either side or bottom
cable hole which does not use.
Step 2: Drill holes for installation in the installation place
1．In accordance with the direction of the camera, place the included "Drill Template" to the
installation place.
2．Drill 4 Screw Holes printed on the Drill Template.
※If pulling the cable out from the bottom of the
camera, also drill out the Cable Hole.
※Depending on the material and conditions of
installation place, it is necessary to embed
plastic or metal cap or anchor in the screw
hole. It is good to embed it at this stage.
Cable Hole
Cap (side)
＜Examples using a cable gland.＞

11
Step 3: Open the Top Case
1. With the bundled Hexagon Screwdriver, loosen the
three Top Case Screws.
※The shape of the head of Top Case Screw is
special. Please use the attached Hexagon
Screwdriver.
The top case is heavy, so please handle it carefully.
※Do not abruptly lift the cover; the Fall
Prevention Wire is connected on the camera
body and the Top Case. Please place the Top
Case next to the camera.
※To avoid scratches or leaving fingerprints on
the lens cover, it is recommended to retain the
plastic thin film covering the lens cover until
the camera is completely installed and
connections are completed. However, the
plastic has been removed on some of the
pictures in this documentation to show clarity
of the procedures being described.
2. If necessary, insert a memory card, with the metallic contacts facing down, into the card
slot of the camera. See How to Install / Remove the Memory Card on page 21.
Step 4: Prepare to Waterproof
When it is necessary to waterproof the cable and cable pulled out portion, please decide the
waterproofing method in advance.
The camera comes with two (2) glands used for waterproof installation:
Cable Gland: For use with an Exterior-grade Ethernet cable. Exterior-grade Ethernet
cables are already waterproof. See Waterproof Solution with Naked Cable on page 13.
Conduit Gland: For use with a flexible conduit. This solution is recommended when an
exterior-grade Ethernet cable is not available or other cables, such as power adapter,
DI/DO devices, etc. will be connected with the camera. See Waterproof Solution with
Condit on page 13.
Determine the type of waterproof solution that is applicable to your installation requirements
and prepare the necessary accessories or purchase extra materials.
Fall Prevention
Wire
Top Case

12
Cable Gland
Conduit Gland
For use with an Exterior-grade
Ethernet cable (not included in the
package).
For use with 1/2”flexible conduit (not
included in the package)
Waterproof Solution with Naked Cable
This section describes the procedures to waterproof the cabling connections using an
exterior-grade Ethernet cable.
1. Disassemble the cable gland as shown below:
2. Insert the clamping nut into the Ethernet cable.
Body
(with Washer)
Sealing Insert
with Claw
Clamping
Nut

13
3. Insert the sealing insert with claw.
Waterproof Solution with Conduit
This section describes the procedures to waterproof the cabling connections using a flexible
conduit with 1/2”trade size (not supplied). This is the recommended solution when
connecting an external power adapter, audio in/out, or digital input/output (DI/DO) devices
to the camera.
1. Disassemble the cable gland as shown below:
Note: In this installation, the conduit gland body can be securely attached to the camera,
therefore the use of lock nut is not necessary. Please set the lock nut aside.
2. Pull the Ethernet cable and other cables (if
any) through the flex conduit.
Note: To connect an external power adapter,
audio in/out, or digital input/output (DI/DO)
devices, insert the cables without connectors
through the flex conduit together with the
Ethernet cable at this point.
3. Insert the clamping nut through the flex
conduit.
4. Insert the sealing rubber and attach it at the
end of the flex conduit.
Lock
Nut
Body
(with Washer)
Sealing
Rubber
Clamping
Nut

14
Step 5: Connect the Cables
Connect the cables drawn from the Cable Hole (side or bottom) to the specified connector.
Step 6: Assemble the Top Case
Return the top case to its original position and tighten
the Top Case Screws (3 places).
At that time, please do not pinch the Fall
Prevention Wire and cables.
SD Card Slot
Digital Input / Output
Ethernet Port
Fall Prevention Wire
Audio Input / Output

15
Step 7: Install the Camera to the Surface
Before installing the camera to the installation place, the camera must have the following
preparations completed.
①Cable withdrawal was completed.
②Waterproofing of the cable and the Cable Hole and so on were completed.
③Memory card installation was completed.
1. According to the above described Steps 1 to 4,
complete the above ①~③.
2. Attach the camera to the installation surface using
the four Installation Screw Holes on the Installation
Plate. (Right figure, red circle)
※In order to prevent a possibility of invasion of rain, it is
recommended to install at the angle where the Cable
Hole faces downward.
※Do not loosen or remove the Camera Fixing Screw (right figure, 3 yellow squares) that fixes
the camera to the Installation Plate.
※Please use screws for installation that match the material of the installation place.
※Because the camera is heavy, fixing should be based on the bolt & net tightening.
Disclaimer: The manufacturer will not be responsible for camera damage caused by
improper installations or the misuse of equipment for installation.
The basic installation of the camera is completed with the above.
Issues which are not mentioned up to this point, such as the connections of
external power supply, audio input / output, digital input / output and the
installation of memory card will be explained in the subsequent chapters. Please
refer as necessary.
For the connection to the network, refer to the page 23 or later.

16
7. Other Connections
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO) and
Audio Input and Output devices using the bundled terminal blocks. The use of these devices,
however, is optional.
7-1. Connecting a Power Adapter (Optional)
The camera consumes 9.6W power when powered by a Power over Ethernet (PoE) switch that
is IEEE802.3af compliant. In case of using a non-PoE switch or your PoE switch has limited
power supply, you can purchase a power adapter and directly connect the camera to a power
outlet. The power adapter must be connected to the supplied terminal block before use.
To do this, follow the procedures below: (The work is done inside the camera. Work with the
Top Case opened according to Step 4 on the page 12.)
1. Loosen the screws of the 12V and GND pins of the
power terminal block.
2. Take note that a standard power adapter cable has
two (2) different wires:
3. Connect the line containing the white stripe to 12 V
of the terminal block and the other to GND.
4. Securely tighten the 12 V and GND screws loosened
in the above step 1.
White stripe: Connects to 12V Pin
Connects to GND Pin

17
5. Set the prepared power adapter for connection
later. The right picture shows an example of a
power adapter with an attached terminal block.
Note: The power adapter is not bundled in the package.
7-2. Connecting DI/DO Devices (Optional)
Depending on your surveillance needs, you may connect digital input or output devices to your
camera to trigger events or notifications.
Digital Input (DI) devices can be used to notify the camera about an activity in the camera site.
DI can be triggers of events. For example, you can connect a “panic button”to the camera; as
such when the panic button is pressed, the alarm signal will be sent through the camera. Other
common DI device applications are emergency button, smoke detector, passive infrared sensor,
etc.
Digital Output (DO) devices are external devices that are activated by the camera upon an
event inside the camera. For example, you can connect an “alarm horn”to the camera; as such
when an event occurs inside the camera (e.g. detected intruder), the alarm horn will sound.
Other common DO device applications are motion-triggered lights, electric fence, magnetic
door locks, etc.
You can connect up to two DI and two DO devices to your camera.
Press and hold the orange tab as you insert the wire through the pin
slot, then release the orange tab to secure the wire.
To connect input devices (DI), map the pins to one of the pin combinations below:
Device
Pin
Mapping Instructions
Digital Input 1 (DI1)
GND
Connect the wires of the first input device to GND and
DI1.
DI1
Digital Input 2 (DI2)
GND
Connect the wires of the second input device to GND
and DI2.
DI2

18
To connect output devices (DO), map the pins to one of the pin combinations below:
Device
Pin
Mapping Instructions
Digital Output 1 (DO1)
12V
Connect the wires of the first output device to 12V and
DO1.
DO1
Digital Output 2 (DO2)
12V
Connect the wires of the second output device to 12V
and DO2.
DO2
The table below shows the DI/DO connection specifications:
Device
DI
Connection design
TTL - compatible logic levels
Voltage
To trigger (low)
Logic level 0: 0V ~ 0.4V
Normal (high)
Logic level 1: 3.1V ~ 30V
Current
10mA ~ 100mA
DO
Connection design
Transistor (Open Collector)
Voltage & Current
< 24V DC, < 50mA
Typical Connection:
Based on these specifications, if the DI device has a voltage of 0V ~ 30V or the DO device
has a voltage of < 24V (<50mA), then the camera can supply internal power to these
devices and there is no need to connect the DI/DO device to an external power source.
In this case, wire connection to GND and DI1 pins to connect a DI device and use the 12V
and DO1 pins to connect a DO device. See wiring scheme below:
Consequently, wire the connection to GND and DI2 to connect a second DI or to 12V and
DO2 to connect a second DO device.

19
High Voltage DO Device Connection
Even though the camera provides 12V power, this may not be enough for some high
voltage DO devices, such as a ceiling light or a motor that opens or closes a gate. In this
case, there is a need to connect an external relay. See wiring scheme below:
Note that when choosing an appropriate relay, please refer to its specifications and make
sure they match the above design. The triggering circuit voltage has to be around 12V DC
and the switch-controlled circuit voltage has to match the external power supply (e.g. 110V
AC or 220V AC).
The illustration below is a graphic example of connecting a relay to a high voltage DO
device.
Relay
(DO1 Device)
)
Camera
Illuminator
110V-220V AC
External Power
Source

20
7-3. Connecting Audio In / Out Devices (Optional)
Depending on your surveillance needs, you may connect audio input or output device, such as
an active microphone or speaker, to your camera. In this case, you need to connect the audio
input/output device to the supplied audio terminal block.
To connect audio input / output devices, map the pins to one of the pin combinations below:
Device
Pin
Mapping Instructions
Audio Output
GND
Connect the wires of the audio output device to GND and
AUDIO.OUT.
AUDIO.OUT
Audio Input
GND
Connect the wires of the audio input device to GND and
AUDIO.IN.
AUDIO.IN
Press and hold the orange tab as you insert the wire through the pin slot, then release the
orange tab to secure the wire.