ZPE ZPE-SMK-U01 User manual

Quick Install Guide
ZPESYSTEMS.COM
Smoke Detector (USB)
ZPE-SMK-U01
COMPATIBLE WITH
ALL NODEGRID DEVICES
HARDWARE
Smoke Sensitivity Complies with EN 54-7:2000+ A1:2002
Protection IP30 Ingress
Requirements ZPE-IO8-U01 & ZPE-RL4-U01
SOLD SEPARATELY
Must be installed to the Nodegrid environment
prior to setting up Smoke Detector
Supply Voltage 12V with USB Adapter
Operating -10º to 55° C (14º to 131º F)
Temperature & Humidity 93±3% at 40° C (104º F)
Cables Relay & Power
Relay & Power Extension: 4 meters (13 feet)
IO Extension Cable: 4 meters (13 feet)
USB Adapter: 1 meter (3.33 feet)
DESCRIPTION
Detects smoke in the local environment. Use in conjunction with
ZPE 4-Channel Relay and 8-Channel GPIO Modules (USB-powered).
Sends notification when the detector is triggered and remotely powers off.
Control and read status with CLI, WebUI, SNMP, or Restful APIs.
All rights reserved. September 8, 2022
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
Product Specifications ZPE-SMK-U01
We suggest placing
this product here
*Rack cage may be a different model or size.
FOR MOUNTING
a. Detach base from unit.
b. Mount base with screws, top down and parallel
to the ground.
c. Reattach top cover.

4-Channel
Relay
Module
ZPE-RL4-U01
Not included
Must already be
installed to
Nodegrid hardware.
Relay & Power
Extension Cable
4 meters
USB Adapter
1 meter
Aux
RR Lock
FR Lock
Smoke
USB POWERED RELAY 4
USBPOWRL004
NC C NO NC C NO
RELAY 0
NC C NO NC C NO
RELAY 1
NC C NO NC C NO
RELAY 2
NC C NO NC C NO
RELAY 3
3 2 1 0GND
USB
IO Extension Cable
4 meters
Aux
RR M/Lock
RR E/Lock
FR M/Lock
FR E/Lock
Smoke
RR Door
FR Door
USB GPIO 8
GPIO
GNO 7 6 5 4 3 2 1 0
USB
Smoke
Smoke
Quick Install Guide ZPE-SMK-U01
Once everything is connected, mount to rack then plug the USB Adapter
to ANY available live USB port to supply power to the Smoke Detector.
Mounting instructions in back.
2
For more information, visit the
"Sensor Quick Install Guide" section at:
zpesystems.com/user-manuals/
3Ensure minimum Nodegrid OS version meets
sensor requirements. Upgrade Nodegrid OS to
minimum version 5.4.1
OPTIONAL: To configure data collection in
ZPE Data Lake, refer to Appendix C in the latest
ZPE Cloud Manual at:
zpesystems.com/user-manuals/
5
4
All rights reserved. September 8, 2022
Let’s set up your Smoke Detector
Make sure that the GPIO and Relay Modules are on hand and set up properly to a Nodegrid device before connecting the pieces as shown.
Refer to the GPIO and Relay Module Quick Install Guides for details.
1
8-Channel
GPIO
Module
ZPE-I08-U01
Not included
Must already be
installed to
Nodegrid hardware.
Relay
& Power
Cable
