Zycoo IA03 User manual

Contents
Overview
................................................................................................................................................................................1
Product Overview............................................................................................................................................................ 1
Product Specifications.................................................................................................................................................... 1
Basic Settings....................................................................................................................................................................... 2
Web Interface Login....................................................................................................................................................... 2
Device Info.......................................................................................................................................................................3
SIP Account..................................................................................................................................................................... 4
P2P Account.....................................................................................................................................................................7
Audio Codecs................................................................................................................................................................... 7
SIP Advance Settings..................................................................................................................................................... 8
Advanced Settings............................................................................................................................................................... 8
Volume Control............................................................................................................................................................... 9
I/O Settings..................................................................................................................................................................... 9
Multicast Settings......................................................................................................................................................... 11
Language Settings........................................................................................................................................................ 12
Settings................................................................................................................................................................................13
Network Setting.............................................................................................................................................................13
Time Settings................................................................................................................................................................. 13
Upgrade.......................................................................................................................................................................... 14
Reboot & Reset.............................................................................................................................................................. 15
Maintenance....................................................................................................................................................................... 16
Diagnostic...................................................................................................................................................................... 16
Ethernet Capture...........................................................................................................................................................16

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
1
Overview
Product Overview
ZYCOO SIP Safety intercom IA03 and IV03 are SIP enabled intercom devices which can be used for consulting
and SOS applications.
By default, IA03 can be used as a voice intercom and IV03 has a built-in HD camera which can support video
intercom. If there is an existing IP camera, this can be linked with IA03 for video intercom. IP cameras which
support RTSP, such as Dahua and Hikvision IP cameras can be linked with IA03.
Based on SIP and with PoE support, the installation of the IA03 and IV03 only requires a PoE enabled
network cable, no power supply and extra wiring is required.
Each of the intercom devices has been equipped with a programmable dial button, any desired number can be
preconfigured. By pressing the button users can talk with the target number in hands-free mode.
IA03 and IV03 have been equipped with digital level input for connection of sensors, and also with a relay
switch which can be used to connect door magnet. The action (open/close the door) of the relay switch can be
controlled by DTMF signal, intercom call status and the sensor input signal.
In addition to working with ZYCOO IP Audio Center, the IA03 and IV03 intercoms can be also integrated with
third-party SIP servers and the features detailed above are still applicable.
Product Specifications
Speaker Components: Ø 40 mm x 12.7 mm (1.6 x 0.5 in)
Sensitivity: 90±3dB
Distortion: <10%, 1000Hz 0.1w/1m
Rated Power: 3W
Max Power: 4W
Frequency Range: 630Hz~4.5KHz
Acoustics: Mono
Microphone: -36±2dB RL=2.2K Vs=2.0V
Relay Switch: Max voltage AC 125V-1A/DC 60V-1A
Video Resolution (IV03): 1920*1080@20fps, 1280*720@25fps

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
2
Basic Settings
Web Interface Login
By default, the SIP safety intercom devices’ IP assignment has been configured as DHCP. Please ensure there’s
DHCP server available in the LAN where the SIP safety intercom devices are installed. If there’s no DHCP
server available or DHCP fails, you’ll have to use the failover IP address 192.168.1.101 to access the web
management interface. Press and hold the call button for 5 seconds then release, the device will announce its
IP address. Input the IP address in the browser address bar to open the web management interface of the SIP
safety intercom. The login screen is shown as below image, here we take IA03 SIP safety intercom as an
example.
Use the default login credentials to login to the web management interface.
Default username: admin
Default password: admin
For the safety of the intercom device, it is recommended to change the default password on first login, please
go to Settings -> Change Password page to change the password.

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
3
Device Info
After login, you’ll first see the Device Info screen.

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
4
SIP STATUS
SIP Account: The SIP number configured on this device.
SIP Server: The SIP server (ZYCOO IP Audio Center or other IP PBX) address.
Register Status: The SIP number registration status.
DEVICE INFORMATION
Device Model: The device model, IA03 or IV03.
Hardware Version: Device hardware version.
Software Version: Device software version, can be upgraded.
Speaker Volume: The current volume level of the device.
Device Description: The device description will be used to display as the tab name of the web browser.
This is useful when configuring multiple devices using the same web browser. Click on the button to
edit.
After modification, the tab name will change.
NETWORK INFORMATION
Mac Address: Shows the device Mac address.
IP Assignment: Shows the network mode of the device, either STATIC or DHCP.
IP Address: Shows the current IP address of the device.
Subnet Mask: Shows the current subnet mask of the device.
Default Gateway: Shows the current default gateway of the device.
Primary DNS: Shows the current primary DNS of the device.
Alternative DNS: Shows the current alternative DNS of the device.
SIP Account
There are three (3) SIP accounts under the SIP Settings, one (1) primary and two (2) secondary for the
use of different SIP accounts to proceed various tasks. If the current device needs to cooperate with the
ZYCOO IP Audio Center, please turn on the ‘ZYCOO IP Audio Center’ option.
Please go to SIP Settings -> Primary SIP Account / Secondary SIP Account-1 / Secondary SIP Account-2

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
5
Primary SIP Account
Secondary SIP 1 Account

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
6
Secondary SIP 2 Account

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
7
SIP Server: Enter the IP address or domain name of the SIP server.
SIP Port: Default SIP port is 5060. If the SIP server uses other port number as SIP port,
please modify in this setting.
User ID: The SIP account number provided by SIP server.
Auth User: Authorized SIP account’s username.
Password: Authorized SIP account’s password.
Register Expiration (sec): SIP register expiration time, the default expiration time is 180 seconds.
Transport: Set up the transport protocol, there are UDP, TCP, TLS options to choose.
Activate: Enable/Disable the SIP register feature.
P2P Account
P2P stands for Peer to Peer. In a P2P network, the peers are connected to each other via the Internet, files can
share, or peers can call each other directly between systems on the network without the need of a central
server.
User ID: The User ID will be displayed as the outgoing number when call out, or the number that
other device need to dial.
Activate: Enable/Disable the P2P feature
Audio Codecs
The network speakers support 4 audio codecs: G.722 (wideband codec), G.711(Ulaw), G.711(Alaw) and Opus
To enabled or disable an audio codec/codecs, please go to SIP Settings -> Audio Codecs page.