ZyXEL Communications VMG8825-T50 User manual

Pack Contents
DoC
VMG8825-T50 Power Cable Ethernet Cable Declaration
of conformity
Safety
Warning
Step 1 Hardware Installation
WAN
1-a
OR
LAN
POWER
ON
POWER
Use the Ethernet cable to connect from the blue WAN port on the router to
the ethernet port on the Optical Network Termination point (ONT).
Quick Start Guide
VMG8825-T50
Dual-Band Wireless AC/N WAN Gigabit Router
(Optional)
If you need any assistance please call us on 0333 0155156 or email [email protected]
www.digitalhomeuk.com
Quick Start
Guide
1-c
1-b
Connect the power cable to the VMG8825-T50 and press the power button.
Note: It may take a couple of minutes to set up.
If using a wired connection, you can connect a computer to one of the LAN ports
as shown - using an Ethernet cable. We recommend CAT6 or above for optimum
performance.
1-a
1-c
1-b
ONT

4-b
4-a
4
WiFi SSID: digitalhome_XXXX
Wireless Key: XXXXXXXXXX
Wall Mounting (Optional)
130.8mm
VMG8825-T50
Username
Password XXXXXXXX
admin
Login
192.168.8.1
3
2-a Option 1 - Using SSID
Step 2 WiFi Connection
Step 3 Advanced access - administrator
SSID
Wireless Key
digitalhome_xxxx
XXXXXXXXXXXX
Wireless Key
digitalhome_xxxx
XXXXXXXXXXX
WiFi
WiFi
digitalhome_XXXX
Connect
More than 2 seconds
WPS
ON
WiFi
WPS
setup
Android Only
OR
OR
within
2minutes
Orange Blinking - WPS process in progress
WiFi SSID: digitalhome_XXXX
Wireless Key: XXXXXXXXXX
Login Password: XXXXXXXX
Device
Label
Device
Label
x2
x2
30.75~32.75
4.00~4.15
2.0~2.3
7.5~8.0
Unit: mm
Unit: mm
32.0~38.0
6.5~7.5
Tapping Screw M4x30 mm
Drill two holes on the wall at the distance of 130.8mm.
Insert the screw anchors and screws (not provided).
Place the VMG8825-T50 so the wall mount holes line up with the screws (4-a & b).
Slide the VMG8825-T50 down gently to locate into place.
Open a web browser and go to http://192.168.8.1.
Enter the default User name (admin) and Login Password (found on a label
at the rear of the device), and then click Login.
You will have administrator access to the Zyxel router configuration options.
2-a
2-b
3
4
Use the SSID (Wi-Fi network name) and Wireless Key (your unique password) on
the device label to connect wirelessly to the VMG8825-T50.
On your smartphone or notebook, find this SSID in the Wi-Fi network settings on your
device.
Enter the Wireless Key to connect.
Use the SSID (Wi-Fi network name) and Wireless Key (your unique password) on
the device label to connect wirelessly to the VMG8825-T50.
On your smartphone or notebook, find this SSID in the Wi-Fi network settings on your
device. Enter the Wireless Key to connect.
Press the WPS button until the WPS LED blinks orange.
Press the WPS button on the client.
When connecting devices for the first time, please do so as close to the router as
possible reducing WPS connection failure.
If the WPS method fails, use the SSID and wireless key to set up a Wi-Fi connection.
2-b Option 2 - Using WPS