1 BY ONE 210NA-0004 User manual

Amplied Digital Indoor/Outdoor HDTV Antenna
New Concept Series - 85 Miles Range
Omni-directional Reception
Model 210NA-0004
Congratulations! You have just purchased the most technologically advanced,
easy-to-install, indoor/outdoor HD digital antenna. 1byone® products have
been consistently rated as "best sellers" and we hope your investment in this
quality antenna will give you and your family enjoyment for years to come.
Thank you for your purchase and your support. We invite you to visit our website
at www.1byone.com for other high-quality products.
Package Contents -
Antenna with Built-in Amplier
Power Supply Box
Power Adapter 5V 100mA
26ft. Coaxial Cable withWaterproof Kit
Pole Mounting Accessories
Wall Mounting Accessories
Instruction Manual
Warranty Card
www.1byone.com
2. Mount the Antenna
Find a convenient indoor/outdoor location to mount your antenna, then scan for channels using the
instructions below.
Note: Before nal mounting, rst test your selected antenna location by scanning for channels. In
some instances, you may decide to relocated the antenna for better reception. See below for addition
tips for optimal antenna placement.
3. Scan the TV for Channels
A. In the TV’s setup menu, set the mode to 'Antenna' or 'Air.' Refer to theTV manual for detailed
instructions.
B. While in the TV’s setup menu, setTV to scan for channels. This can sometimes be listed as
'auto-program,' 'channel search,' or 'channel scan.' Refer to your TV manual for detailed instructions.
Note: If you want to know how many channels you can expect to receive, please refer to "How many
channels can I receive?"in FAQ below.
Antenna Placement Options and Tips
Signal reception and quality depends on the distance from the broadcast tower to your home.
Surrounding geography and environment may also aect signal strength and reception.
If your reception is sporadic or needs to be improved, try the helpful tips below:
1. Place the antenna in a higher location.
2. Place the antenna in line of sight with theTV tower(s) and avoid obstructions.
Important:
Always re-scan for channels whenever you move your antenna.
Frequently Asked Questions
How many channels can I receive?
The number of channels you can receive will be determined by what is broadcast in your area.
Channel reception will vary from location to location based on terrain (including trees, buildings,
hills and mountains). The fewer obstructions, the better your chance of receiving strong digital
signals. Go to http://dtv.gov/maps and enter your address for a listing of likely channels
available in your area.
Copyright ©2015 1byone Products, Inc. All rights reserved
Will all the channels I receive be High Denition (HD)?
Not all digital signals are High Denition (HD). Make sure you are using a High Denition Television
(HDTV) with built in ATSC tuner.When connecting the antenna to a third-party receiver (set-top box),
make sure it is capable of receiving HD. Otherwise no HD channels can be viewed.
Will picture quality be better than with cable?
All cable companies compress their HD signals.The result is a degraded signal that is usually inferior to
ATSC broadcasts. Many factors determine whether your picture quality will be better in every instance.
However, your picture quality should improve using your 1byone® ATSC-compatible digital antenna.
Can I connect the antenna to multiple televisions?
Yes. However, the signal should only be split between multiple HDTVs if using an amplied antenna.
Troubleshooting
What if I can’t receive a signal with my 1byone® antenna?
1. Check to make sure you have correctly connected the antenna to your HDTV or third-party HD receiver.
See“Connect the Antenna toTV or Set-top Box” in this manual.
2. Re-scan for channels. See “Scan for Channels”in this manual.
3. Reposition the antenna in a dierent location, such as higher on a roof/wall or closer to a window.
Also make sure the antenna is in line of sight of the broadcast tower. Signal strength will vary based on the
surrounding conditions. Distance from the tower, surrounding hills and buildings, and even tall trees
can impact reception. Always re-scan for channels after moving the antenna.
One channel is missing.
Something may be obstructing the signal. Move the antenna and re-scan for channels.
The picture or sound freezes while I am watching a channel or there are boxes in the picture.
This is often caused by a weak or intermittent signal.Try moving the antenna to a dierent location or
conrming the antenna still has line of sight with the broadcast tower.
For Optimal Performance
Place your 1byone® antenna in the location with the strongest reception.Typically this will be on the roof,
balcony, or window facing the broadcast tower. and facing the broadcast tower. A television signal can
become weak or intermittent when passing through walls that are exceptionally thick or contain large
amounts of metal.Your 1byone® antenna can usually pick up the stronger signals from almost any
direction. Experiment with dierent roof, balcony, and window placements to nd the best location to
mount your antenna.To check the exact distance from your residence to the nearest tower, go to
http://dtv.gov/maps and type in your zip code. You will then have a better idea of what you should
expect in the way of reception. If there are multiple tower locations, optimize the position of your 1byone
antenna by making sure it has line of sight with all the towers.
Distributed by
1byone® Products, Inc.
2313 E Philadelphia St, Ontario, CA 91761
www.1byone.com
®
尺寸：355.5X216mm说明书形式为三折页 材质：铜版纸120g
正面背面
85-mile maximum range possible.Individual experiences may vary.

(Fig.4) Also appropriate for mobile use.
2. Mount Antenna
Find a convenient location to mount your antenna. Before mounting, screw the
VHF Reception Pole at the middle of the antenna. This is for enhanced VHF
reception.
Note: Test your antenna location after scanning for channels & before nal
mounting. In some instances, you may decide to relocate the antenna for better
reception. See“Antenna Placement Options and Tips”.
1
Supplied 100-240V Power
Adapter
4
F-type connector
linking bolt
Coaxial-cable
Water-proof kit
Power Supply Box
To ANT/IN or CABLE IN
on back of TV
26’Coaxial Cable
Power Adapter
To Wall Outlet
A. Connect the 26ft long coaxial cable to the antenna (as shown in figure 1 below)
B. Connect the other end of the 26ft coaxial cable to the power supply box (as
shown in gure 2 below).
C. Connect the coaxial cable from the power supply box to the ANT/IN or CABLE IN
port on the back of your TV (as shown in figure 3). Note: For TV’s that require a tuner
box, connect the coaxial cable from the power supply box to the tuner box ANT/IN or
CABLE IN port.
Back of TV
3
2
From
Power supply box
ANT/IN
CABLE IN
ANT/IN
1. Connect the Antenna and Power Supply Accessories
(Fig.2) Use the mounting accessories to x the antenna on the balcony.
(Fig.1) Use the wall mounting accessories to fix the antenna on the wall.
(Fig.3) Use the pole mounting accessories to x the antenna on the pole.
D. The antenna's built-in amplier requires power to operate properly. Plug the
round end of the power adapter's cable cable into the power supply box (as shown in
gure 2). Then insert the power adapter into any standard 110V outlet (see this
option in gure 4).