2in1 BASIC PG-300 User manual

ENG
SLO
DE
1
BLOOD GLUCOSE MONITORING SYSTEM
SISTEM ZA NADZOR SLADKORJA V KRVI
BLUTZUCKERMESSSYSTEM
USER’S GUIDE
PRIROČNIK ZA UPORABNIKA
GEBRAUCHSANWEISUNG

2
BLOOD GLUCOSE MONITORING SYSTEM
Thank you for purchasing
the 2in1.® BASIC.
Please read this User’s
Guide thoroughly before
using, and ensuring correct
operation.
Please keep this User’s
Guide in safe place for your
future reference.
USER GUIDE
ENG

2in1.® BASIC is very easy to carry around and used for
measuring the glucose level by whole blood whenever you
need. It is also very simple, easy to use and smart. You don’t
worry about coding your meter, the 2in1.® BASIC does it
automatically. 2in1.® BASIC is only used for testing glucose
level and using only fresh capillary whole blood samples.
2in1.® BASIC is intended for use outside the body (in vitro
diagnostic use) by people diabetes at home and by healthcare
professionals in clinical setting. 2in1.® BASIC should not be
used for the diagnosis of diabetes or the testing of newborn.
2in1.® BASIC meter has wheel button to
eject the used strip easily and simply.
The small size with stylish design and
ease operation, allows you can bring
everywhere.
Shows much useful information.
Requires very small volume (0.5 μL) and
display the result within 5 seconds.
Measures glucose level of whole blood
by AST(Alternate site testing).
No need to change Code number or to
use Code chip when test strip inserting.
Features 1
2
3
4
5
6
3

4
TABLE OF CONTENTS
About 2in1.® BASIC
Before Starting
Name and Funtion
Cautions
Obtaining Blood Drop
About Alternate Site Testing
Testing Your Blood Glucose
Control Solution Testing
Reviewing Results
Setting the Meter
Replacing the Battery
Error Messages
Troubleshooting
Performance Characteristics
Caring for System
Specifications
5
6
8
11
14
17
19
23
26
29
33
34
36
37
39
41

5
ABOUT 2IN1.® BASIC
2in1.® BASIC includes:
1. 2in1.® BASIC Meter
2. Carrying Case
3. Lancing Device
4. Lithium Battery (CR2032)
5. 2in1. Blood Glucose Test Strips
6. Lancets
Documents in your system include this USER’S GUIDE
and QUICK GUIDE.
If any items are missing, please contact to local distributor.

6
BEFORE STARTING
Symbols
Caution, see instructions for use
Single use only
Expiration date
Serial number
Lot number
In vitro Diagnostic medical device
Manufacturer
Authorised representative
Symbol for temperature limitation
Consult instructions for use
Biological risks
Contains sucient for <n> tests
Direct current
Separate disposal from other household waste
Catalogue number

7
BEFORE STARTING
Intended Use
2in1.® BASIC is intended to be for personal self-testing to
monitoring glucose concentration in fresh whole blood. 2in1.®
BASIC can apply for outside body (in vitro diagnostic use) on
fingertips, forearm, upper arm, hand, thigh and calf.
Test principle
The 2in1.® BASIC is designed for detecting a small electrical
currency variation, which produced by the reaction of glucose
in the blood sample with the reagents on the strip. This
currency is varied by the amount of glucose in the blood
sample. The currency variation is calculated to glucose
concentration of sample.
Setting the time and date
Your 2in1.® BASIC comes with a preset time, date and year.
Before your first using the meter, or when you change battery,
you should check the setting of time and date for your local
time zone. In case of you don’t set your meter at first time
or after changing battery, you can hear beep 3 times when
inserting a test strip. See the 28 page (Setting the Meter).

8
NAMES AND FUNCTIONS
Display Screen
Display test result and other
information.
Buttons
Review stored results and adjust
parameters in setup mode. You can
turn the meter o by pressing ‘<’
button and ‘>’ button at same time.
Eject Wheel
Remove the tested strips by rolling.
Test Strip Port
Insert the 2in1.® Test Strip. The meter
will turn on automatically when
inserting the test strip.
Electrodes
Insert into test strip slot while facing up.
Sample Tip
The fresh blood sample is drawn into.
Front View
2in1.® Test Strip

9
NAMES AND FUNCTIONS
Data Port
Transfer test results to computer
(Cable is optional.)
Battery Cover
Slide cover o for replacing battery.
Side View
Rear View

10
NAMES AND FUNCTIONS
Lancing Device
Clear AST cap
Lancet ejector Sliding barrel
Adjustable cap Lancet holder Release button
1. Indicates strip code number.
2. Displays current mode.
3. Warning when the battery is low
or need to be replaced.
4. Display test results and messages.
5. Indicate ready to test.
6. Indicates abnormal temperature
warning.
7. Display measuring unit.
8. Display current time.
9. Indicates alarm.
10.Display date and year.
* Clear AST cap is an optional accessory. Please
contact your local distributor.
Display

11
CAUTIONS
Cautions for
System
• The 2in1.® BASIC is intended for use
outside the body (in vitro diagnostic
use) only.
• The 2in1.® BASIC uses only the fresh
capillary whole blood for measuring.
The 2in1.® BASIC must use with 2in1.®
Test Strip and 2in1.® Control Solution.
• Do not use the 2in1.® BASIC for
diagnosis of diabetes, testing on
newborns and with arterial blood.
• The 2in1.® BASIC contains small parts
that may be dangerous if swallowed.
• Check the packages when purchasing
and before using the 2in1.® BASIC.
• Before operating, be sure to read
User’s Guide and Insert found in test
strip container carefully.
• Do not make any of medical
relevance decision without consulting
your physician and/or having
received appropriate training.

12
CAUTIONS
• Keep the 2in1.® BASIC out of chil-
dren’s reach. When a children
swallowed battery or battery cover
accidentally, consult with a doctor
immediately.
• Do not dispose the battery into fire.
Do not disassemble or modify the
meter.
• Do not attempt to severe shock,
drop or step on meter.
• The 2in1.® BASIC is not waterproof.Do
not wash by water or touch it with
wet hands.
• Do not wipe the meter with chemical
solvent or abrasive cleaners.
• Avoid the 2in1.® BASIC being ex-
posed to high temperature, high hu-
midity, rain and/or dust when using
or storing.
• Do not test instantly when the 2in1.®
BASIC moves to where sudden
temperature changes. Please wait 20
minutes and start testing.
Cautions for Meter

13
CAUTIONS
Cautions for
Test Strip
• Store 2in1.® Test Strip in a cool, dry
place between 2°C and 32°C (36°F and
90°F).
• Keep away from direct sunlight and
heat. After taking a test strip out of the
container, close cap tight immediately.
• You may get inaccurate result if
container cap remains opened long
time.
• Don’t drop the blood sample on the
surface of strip directly.
• Do not press test strip against your
finger. It may aect bad aspiration of
blood sample aspiration.
• Do not use a test strip that looks
damaged and/or used. Test strips are
for single use only.
• Store the test strips in their original
container.
• After you take a strip out of the
container, be sure to use it within three
minutes.
• Use test strips within 3 months (90
days) after opening the container.
• By clean and dried hands, you may
touch when taking out test strip and/or
insert to port.
• Do not bend, cut, or modify test strips.

14
OBTAINING BLOOD DROP
STEP 1
Wash and cleaning your hands carefully
with soap and warm water for increasing
the blood circulation in finger vein. Dry
hands thoroughly until pricked skin is
dried o.
STEP 2
Unscrew the lancing device cap by
turning counter-clockwise while holding
firmly.

15
OBTAINING BLOOD DROP
STEP 3
Insert a new sterile lancet into the lancet
holder.
STEP 4
Twist the lancet cap o.
STEP 5
Put the lancing device cap on and close
by turning clockwise.
STEP 6
Hold the lance holder firmly, and pull
back and release the sliding barrel. Now
the lancing device is cocked.

16
OBTAINING BLOOD DROP
STEP 7
Set the lancing depth by rotating the
cap. 1-2 for soft or thin skin, 3 for average
skin, 4-5 for thick or calloused skin.
STEP 8
Place the lancing device on finger tip.
While lancing device rest on the finger.
(The harder it is pressed, the deeper the
lance), press the release button to lance.
Caution: To avoid the infection possibility:
Make sure to wash the lance position with soap
and water before sampling.
Do not share a lancet or lancing device with
others together.
Always use a new lancet - lancets are for single
use only.
Keep your meter and lancing device clean.

17
ABOUT ALTERNATE SITE TESTING
The 2in1.® BASIC can measure a blood sample from your
Upper arm, Forearm, Hand, Thigh or Calf alternatively.
Obtaining a blood drop from these “alternate site” may be less
pain than a fingertip. Following figure shows where you can
test with the 2in1.® BASIC. Do not apply to moles, veins, bones
and tendons. Consult to your healthcare specialist before
doing alternate site test.
Upper Arm
Forearm
Hand
Fingertips
Thigh
Calf

18
ABOUT ALTERNATE SITE TESTING
Obtaining a blood sample from alternate sites is dierent than
a fingertips sample collecting.
After inserting a new sterile lancet, put on
the clear AST cap to the lancing device.
Place the lancing device on selected posi-
tion, pressing the lancing device for a few
seconds. After then push the release but-
ton to take a sample. Watch through the
clear cap until a sucient blood sample is
taken. If there is not enough blood, gently
massage the area until a sucient sample
has been collected.
Caution: Do not test on alternate sites:
when you think your blood glucose level is
changing rapidly, such as within two hours of
exercise, a rapid-acting insulin injection or insulin
pump bolus or within two hours after a meal.
When you are testing for hypoglycemia (low
blood glucose) or
if you suer from hypoglycemia unawareness.

19
TESTING YOUR BLOOD GLUCOSE
STEP 1
Insert the test strip while electrode end
facing up into the test strip port until
stop. The meter turns on automatically.
STEP 2
After time and date is displayed for a
while. The code number and strip symbol
are displayed. A strip symbol with filling
blood tells you 2in1.® BASIC is ready to
test.
STEP 3
Compare and ensure the displayed code
number is same as printed code on test
strip container. If displayed code number
is dierent, please use another new strip.

20
TESTING YOUR BLOOD GLUCOSE
STEP 4
Touch the drop to test strip tip, and
hold until the 2in1.® BASIC beeps. Blood
sample is drawn into test strip.
STEP 5
The screen shows counting progress
during 5 seconds.
STEP 6
When the measuring complete, there
is beep sound. The blood glucose test
result display on screen.
Important: The volume of blood
sample must be over 0.5 microliter
(real size”.“) at least.