2N 914401E SIP Speaker User manual
www.2n.czVersion
2N
®SIP Speaker
Public Address Paging
Installation manual
2.2
The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of telecommunications
equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private
branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has
been ranked among the Czech top companies for years and represented a symbol of
stability and prosperity on the telecommunications market for almost two decades. At
present, we export our products into over 120 countries worldwide and have exclusive
distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands protected
by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On
www.faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...“.
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with
®SIP Speaker
all basic requirements and other relevant provisions of the 1999/5/EC directive. For the full
wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our website at
www.2n.cz.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by this
standard and guarantee a high quality, technical level and professional aspect of all our
products.
Content
Content
1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1ComponentsandAssociatedProducts ...............................6
1.2TermsandSymbols ..............................................8
2. Description and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1BeforeYouStart .................................................10
2.2MechanicalInstallation ............................................11
2.3ElectricInstallation ...............................................12
2.4ProductDescription ..............................................16
3. Function and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.1Configuration ...................................................19
3.2DefaultReset ...................................................22
3.3BasicFunctions .................................................24
4. Technical Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5. Supplementary Information . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.1Troubleshooting .................................................31
5.2Directives,LawsandRegulations ...................................32
5.3GeneralInstructionsandCautions ...................................34
42N TELEKOMUNIKACE a.s., www.2n.cz
®
1. Product Overview
In this section, we introduce the product, outline its application2N SIP Speaker
®
options and highlight the advantages following from its use. The section also includes
safety precautions.
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Properties
2N SIP Speaker® is a versatile sound transmission system for IP networks. It is
designed as a universal VoIP telephone with an audio output/input, button and
switched circuit connection option. It finds a variety of applications – in schools,
hospitals, office buildings, hotels, production halls, shopping centres, bus terminals,
airports and so on. You can monitor the events in the area using an2N SIP Speaker
®
integrated streaming server.
2N SIP Speaker
® is a stand-alone SIP-based sound decoder and converter with an
amplifier. communicates with the other audio system components2N SIP Speaker
®
via the SIP Proxy or directly via a specified address.
Press the attached button to set up a call to up to three predefined numbers or
addresses, with calls being transferred automatically at no answer. Configure the
button function using an integrated calendar to make sure that the called subscriber is
always accessed.
You can make use of a lot of convenient VoIP services thanks to the integrated SIP
such as call forwarding at no answer (to another worksite, recording machine or mobile
phone) and call transfer (from the secretary to the required person, e.g.).
2N SIP Speaker
® is equipped with a switch for you to control the electric door lock
from any telephone (by tone-entering the password).
You can manage your unit via a configuration web interface, by2N SIP Speaker
®
52N TELEKOMUNIKACE a.s., www.2n.cz
®
pushing the unit buttons or with a remote controller.
Advantages of Use
Operable in the Ethernet network
Ethernet-based power supply – PoE
SIP
Integrated administration web server
1 programmable button
Streamed audio support
Integrated calendar with programmable DAY/NIGHT/WEEKEND modes
Applicable as standard VoIP telephone/communicator
DTMF detection according to RFC2833, in-band and SIP-INFO
Basic Features
10/100Base-TX LAN interface
12 V DC / 1,8 A or PoE 802.3af supply
Integrated 30 W amplifier
Line/headset output
Colour LED operational status signalling
Universal galvanically isolated output
Universal galvanically isolated digital input
Two volume control buttons
Infrared remote control
62N TELEKOMUNIKACE a.s., www.2n.cz
®
1.1 Components and Associated Products
Basic Unit
914401E
2N SIP Speaker
®
914490E
set with speaker and mic2N SIP Speaker
®
Accessories
91378100E/US
PoE Injector
914102E
12 V DC / 2 A Adapter
914103E
Remote Controller for volume adjustment
Associated Products
72N TELEKOMUNIKACE a.s., www.2n.cz
®
914420E
with loudspeaker for2N SIP Speaker
®
wall mount
914430E
with loudspeaker for2N SIP Speaker
®
flush mount
82N TELEKOMUNIKACE a.s., www.2n.cz
®
1.2 Terms and Symbols
The following symbols and pictograms are used in the manual:
Safety
abide by this information to prevent persons from injury.Always
Warning
abide by this information to prevent damage to the device.Always
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.
92N TELEKOMUNIKACE a.s., www.2n.cz
®
2. Description and Installation
In this section, we describe the product and its installation.2N SIP Speaker
®
Here is what you can find in this section:
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Product Description
102N TELEKOMUNIKACE a.s., www.2n.cz
®
2.1 Before You Start
Product Completeness Check
Before installing this product, check whether the product delivery includes:
1× 2N SIP Speaker®
4× self-adhesive device feet
1× 5-pin terminal block
1× 4-pin terminal block
Quick User Manual
Certificate of Warranty
Installation Conditions
2N SIP Speaker® is to be connected to the LAN.
2N SIP Speaker® is designed for indoor use.
2N SIP Speaker® may not be operated in damp environment.
112N TELEKOMUNIKACE a.s., www.2n.cz
®
2.2 Mechanical Installation
If you intend to use your unit in various interiors, please stick the2N SIP Speaker
®
four feet included in the delivery onto the bottom side of the device to avoid scratching
of the underlying surface.
Surface Mounting
Use the L-profiles (separate accessories – Part No. 914105E) to mount your 2N SIP
®
unit on a wall or another solid surface. Insert the L-profiles in the sides of theSpeaker
assembly and fit them with four screws to keep the device in place. You can use the
dowels and screws included in the delivery for wall mounting. Follow the instructions
below while drilling the mounting holes.
Mounting HolesFigure:
122N TELEKOMUNIKACE a.s., www.2n.cz
®
2.3 Electric Installation
Electric Installation Step by Step
It is very easy to connect electrically. Follow the steps below to2N SIP Speaker
®
avoid equipment damage or electrical injury:
Connect the microphone, loudspeaker, headset or external amplifier.
Connect the digital input and output.
Connect the UTP cable.
Connect a 12V power supply (unless PoE is used).
Loudspeaker Connection
2N SIP Speaker
® is equipped with a power amplifier for 1 or 2 loudspeakers. The
loudspeakers to be used must have the nominal impedance of 4–8 Ω each. Refer to the
table below for possible configurations and related maximum power outputs (sinus,
THD < 1 %):
Loudspeaker(s) 12 V / 2 A PoE
Two 4 Ω 2× 10 W 2× 5 W
Two 8 Ω 2× 9 W 2× 5 W
One 4 Ω 1× 18 W 1× 10 W
One 8 Ω 1× 12 W 1× 10 W
Use the and or and terminals.R + L − L + R −
Loudspeaker ConnectionFigure:
Headset/External Amplifier Connection
2N SIP Speaker is equipped with a headset/external amplifier output. The 3.5mm
®
jack is available on the front panel.
Caution
Be sure to connect the power supply as the last step. 2N SIP Speaker
®
The same applies to PoE supply from the LAN.
132N TELEKOMUNIKACE a.s., www.2n.cz
®
Audio Output ConnectionFigure:
Microphone/Line Connection
2N SIP Speaker
® is equipped with a microphone/external supply output. The 3.5mm
jack is available on the front panel. Use electret microphone for connection.
Audio Input ConnectionFigure:
Digital Output Connection
2N SIP Speaker
® is equipped with a passive output relay switch for light
signalling/external amplifier/alarm activation. The output is available on terminals
marked and allows for switching of up to 24V/1A AC/DC loads. By default,LOGIC OUT
the output is in the NO (normally open) state.
Digital Output ConnectionFigure:
Warning
Do not exceed the upper voltage and current limits to avoid irreversible
damage of the equipment.
142N TELEKOMUNIKACE a.s., www.2n.cz
®
Digital Input Connection
2N SIP Speaker is equipped with a digital input for an optional button, movement
®
sensor or other applications. This input is available on the terminal.LOGIC IN
Figure: Digital Input Connection
LAN Connection
2N SIP Speaker
® can be connected to a standard local area network using a LAN
interface via the RJ-45 connector on the back panel. Always use CAT-5d or higher class
cables for reliability reasons.
LAN ConnectionFigure:
The LAN interface is equipped with the Auto MDIX function for automatic
straight/cross-over cable detection.
The LAN interface can also be used for the power supply through2N SIP Speaker
®
active network elements or injectors meeting the IEEE 802.3af standard.
Warning
Do not exceed the maximum voltage values (24V) applied to the LOGIC
input to avoid irreversible damage of the equipment.IN
Note
With PoE, the integrated amplifier power output is limited to 10 W. To
utilise the maximum power output of the amplifier, feed 2N SIP Speaker®
from a 12V DC/1.8A external power supply.
152N TELEKOMUNIKACE a.s., www.2n.cz
®
Power Supply Connection
2N SIP Speaker
® can be fed using active network elements or PoE injectors via the
LAN interface. In case this option is unavailable, use a 12V DC/2A (Part No. 914102E)
power supply or another power supply on condition that you keep the nominal values
included in the Mechanical and Electrical Parameters subsection.
Connect the 12V DC power supply either to the back panel supply connector marked
, or terminals marked and .DC IN DC IN + DC IN –
Figure: Power Supply Connection
Warning
If you use an adapter other than the recommended one, do not exceed
the nominal supply voltage value of 12V. Also make sure that the supply
voltage polarity is correct. Exceeding nominal values and/or incorrect
connection may lead to irreversible damage of the equipment.
162N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
2.4 Product Description
2N SIP Speaker
® is an Ethernet audio converter designed for public sound
distribution. It is connected to and communicates with the SIP Proxy server via
telephone calls. This guarantees compatibility with all SIP-based systems.
The main principle of the operation is to convert an audio signal2N SIP Speaker
®
between the Ethernet and audio interfaces. Therefore, is equipped2N SIP Speaker
®
with an integrated 2× 10 W amplifier for direct loudspeaker connection.
You can control with two buttons on the front panel or using an2N SIP Speaker
®
infrared remote controller.
2N SIP Speaker
® is equipped with a digital input and output, which extend the
converter options and may be helpful in special applications.
Use an integrated web interface for configuration. Apply the 2N SIP Speaker
®2N®
to search all the units connected.Helios IP Network Scanner 2N SIP Speaker
®
2N SIP Speaker Front and Back Panels
®
Front and Back PanelFigure: 2N SIP Speaker
®
Connectors and Controls:
12 V DC / 2 A power supply adapter connector
Alternative power supply connection terminals −
Alternative power supply connection terminals +
Passive output relay with galvanic isolation for external 24 V / 1 A AC/DC load
switching
Digital input with galvanic isolation for external sensor/button, etc. connection
10/100BASE-TX LAN RJ-45 connector
Integrated amplifier output terminals for 1 or 2 loudspeakers
Headset/line output for standard earphones/external amplifier
− and + volume control buttons
172N TELEKOMUNIKACE a.s., www.2n.cz
®
10.
11.
12.
13.
14.
Microphone input (use electrolytic microphone)
Power up LED indicator
Operational status LED indicators
RESET button
Infrared signal receiver for remote control and signal reception LED
182N TELEKOMUNIKACE a.s., www.2n.cz
®
3. Function and Use
This section provides the basic and extended functions of the produ2N SIP Speaker
®
ct.
Here is what you can find in this section:
3.1 Configuration
3.2 Default Reset
3.3 Basic Functions
192N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
4.
3.1 Configuration
2N SIP Speaker
® is configured through an integrated administration web server.
Connect to the IP network and make sure that i2N SIP Speaker
®2N SIP Speaker
®
s powered.
Description of 2N Helios IP Network Scanner
®
The purpose of this application is to find the dynamic IP address of i2N SIP Speaker
®
n the local IP network. The application can be downloaded from the 2N web sites
.www.2n.cz
Run the installer. 2N Helios IP Network Scanner
®
The installation wizard will guide you through the installation.
Installation WizardFigure: 2N Helios IP Network Scanner
®
After installing the application, run the2N Helios IP Network Scanner
®
application using the menu of the Microsoft Windows operating system.Start
202N TELEKOMUNIKACE a.s., www.2n.cz
®
4.
5.
Upon launch, the application starts searching the LAN automatically for all 2N®
with an assigned or statically set IP address. The devices are SIP Speakers
then listed in a table.
WindowFigure: 2N Helios IP Network Scanner
®
Select the to be configured. Click on it with the right-hand2N SIP Speaker
®
mouse button and select to open the web browser window, log in to Browse... 2N
and start configuring as described in the Login subsection below. SIP Speaker
®
Login
In the web browser enter the IP address of . Subsequently, a login2N SIP Speaker
®
screen will be displayed. The default login username and password are as follows:
Username: Admin
Password: 2n
If the login screen does not appear, an incorrect IP address was entered into the web
browser or the administration web server was turned off. If you are2N SIP Speaker
®
not sure of the IP address of , use the 2N SIP Speaker
®2N Helios IP Network
®
application as described in the Description of Scanner 2N Helios IP Network
®
subsection.Scanner
Find how to switch on the administration web server in the Administration Web Server
Switch-On subsection. Please check the IP address entered, or, if applicable, check the
way the IP address was obtained as described at the beginning of subsection 3.2
Default Reset.
Language Selection
You can select the language using the tag menu in the right-hand upper corner as
shown in Figure below.
This manual suits for next models
1
Table of contents
Popular Speakers System manuals by other brands
dB Technologies
dB Technologies ES802 Quick start user manual
Rocket Fish
Rocket Fish RF-WHTIB Guide de l'utilisateur
V-tech
V-tech DM223 user manual
Cambridge Sound Works
Cambridge Sound Works Center Channel II user manual
Power bass
Power bass 3XL-101D Application guide
Silvercrest
Silvercrest PAC-10 Instruction manual and safety instructions
