Sven SPS-707bL User manual

www.sven.fi
OPERATION
MANUAL
2.0 Multimedia Speaker
System
with Bluetooth
SPS-707bL

ENG
1
Operation Manual
Technical support is on www.sven.fi.
Congratulations on your purchase of the Sven speaker system!
COPYRIGHT
© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The
information in this Manual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damage which has arisen from the information
contained in this Manual.
CONTENTS
1. BUYER RECOMMENDATIONS ..................................................
..............
2. PACKAGE CONTENTS............................................................. .............
3. SAFETY PRECAUTIONS .................................................. ......................
4. TECHNICAL DESCRIPTION .................................................... .................
5. PREPARATION AND OPERATION ..........................................
.......................
6. TROUBLESHOOTING..................................
...............................................
7. TECHNICAL SPECIFICATIONS ..................................................... ...........
1
2
2
2
4
7
7
1. BUYER RECOMMENDATIONS
•Unpack the device carefully. Make sure there are no accessories left in the box. Check up the
device for damage; if the product was damaged during transportation, address the firm which
carried out the delivery; if the product functions incorrectly, address the dealer at once.
•Check up the package contents and availability of the warranty card. Make sure the warranty card
has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods
number corresponds to that in the warranty card. Remember: in case of warranty card loss or
discrepancy of numbers you forfeit the right for warranty repairs.
• Do not switch on the speaker system immediately after you bring it into a room from environment
with negative temperature! After unpacking, the speaker system should be kept in conditions of
room temperature for at least 4 hours.
•Before installing and using the speaker system, read this Manual carefully and keep it for future
reference.
SPS-707bL

ENG
2
2. PACKAGE CONTENTS
• Speakers – 2 pcs
• Аudio cable – 1 pc
• 2RCA to mini-jack signal cable – 1 pc
• Power cable – 1 pc
• Remote control – 1 pc
• Battery (installed into the remote control) – 1 pc
• Operation manual – 1 pc
• Warranty card – 1 pc
3. SAFETY PRECAUTIONS
•To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and
repairs should be performed only by qualified specialists in an authorized service center. The list of
authorized service centers is available on www.sven.fi.
•Do not allow the circuit of wires (including the grounded ones) between the speakers, on the
power amplifier or the ground, for it causes damage to the power amplifier output stage.
•Do not touch the MSS power cord plug pins for 2 seconds after unplugging it from the mains.
•Do not put foreign objects inside the holes of the MSS.
•Protect the MSS from high humidity, water and dust.
•Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose it
to direct sunlight.
•Do not place any open flame sources on or close to MSS.
•Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When
operating the MSS, do not put any devices on it, do not cover it with cloth or other objects pre-
venting it from cooling.
•Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
4. TECHNICAL DESCRIPTION
SPS-707BL Multimedia Speaker System with Bluetooth (MSS) are designed to play music and
sound games, movies, etc. The MSS has a built-in power amplifier allowing to connect it to virtually
any audio source (CD/DVD-players, TV set, PC, etc.). MSS has a built Bluetooth wireless signal
transmission protocol. Wireless signal transmission is also carried out by the NFC technology.
Remote control (RC) is included.
Special features
•Speaker system is compatible with PCs, DVD/Media-players, mobile devices and other sound sources
•Two switched wired inputs
•Control unit on the top panel
•Separate control of LF and HF timbre
•Bluetooth wireless signal transmission protocol
• Вuilt-in NFC module for prompt connection via Bluetooth
•Connection indication of audio devices
•Remote control
Caution! High voltage inside! To avoid the risk of electric
shock do not open or touch elements inside.
2.0 Multimedia Speaker
System
with Bluetooth

m
POWER
ON
OFF
PC AUX
~100V-240V/50Hz-60Hz
R
L
–
+
n
l
k
j
SPEAKER OUT
BT
+
_
INPUT MODE
CONNECT
VOL– VOL+
a
PC
b
AUX
c
Bass
d
Treble
e
ghi
f
•Glossy black front panels
•MDF speaker cabinets
Active speaker panels
aBT: Bluetooth mode indicator
bPC: PC input power indicator
cAUX: AUX input power indicator
dBass: LF regulation indicator
eTreble: HF regulation indicator
fINPUT/ : Standby mode button (long press);
audio source selection button: BT/PC/AUX (short
press)
gMODE/CONNECT: forced search Bluetooth
mode device (long press);
LF/HF regulation (short press)
hVOL-/–: volume down button;
LF/HF frequencies level down (Tone mode control)
iVOL+/+: volume up button;
LF/HF frequencies level up (Tone mode control)
jPC: PC input for connection audio source
kAUX: AUX input for connection audio source
lPOWER ON/OFF: power switch
mPower cable jack
nOutput jack for passive speaker connection
Remote control (Fig. 3)
aBT: Bluetooth mode selection button
b: ON/OFF power switch button (Standby mode)
cCONNECT: start the Search mode (previously
instaled Bluetooth-connection is off)
dPC/AUX: PC/AUX audio source selection button
eVOL +/-: volume up/down button
f/ : previous track / next track (Player mode)
gTREBLE +/-: treble level up/down control button
h: Mute button
iRESET: reset button
j: Play / Pause (Player mode)
kBASS +/-: bass level up/down control button
Notes:
• Before operating the RC, extract the battery, remove the film protecting the battery from
discharge during transportation, and insert the battery back into the RC.
• Use the remote control at an angle no more than 30 degrees, no more than 7 meters away
from the IR receiver.
• Direct the RC at the IR receiver display on the control panel.
• If the RC isn’t working, check the battery and replace the discharged battery with a new one.
Fig. 2. Active speaker
rear panel
Fig. 1. Control panel
ENG
3
Operation Manual SPS-707bL

e
j
e
b
a
h
d
c
i
f
k
g
BT
CONNECT
• Remove the battery from the remote control if the
device is left unused for a long period of time (more than
a week).
5. PREPARATION AND OPERATION
Speaker placement
•Place the speakers symmetrically to the listener at least one
meter away.
•Bass reflex ports are located at the rear panels of speaker
cabinets, please locate the speakers about 20–30 cm away
from the wall or any other obstacle.
•Place the speaker system far away from supersensitive mo-
nitors and TV sets, as insignificant image distortion in these
devices is possible.
MSS сonnecting and control
SPS-707BL Multimedia Speaker System can be connected to
virtually any audio source: DVD/CD, PC sound card, etc. (see
connection diagram in Fig. 4).
• Before making any connections, make sure that the MSS is
unplugged. Connect the active speaker with the passive one
using the audio cable (included). To do this, release con-
nector terminals on the passive speaker, insert the audio
cable «plus» (red) wire into «+» jack and the «minus» (black) wire into «–» jack of connecting
terminals (see connection diagram in Fig. 4), and then connect the cable to the active speaker
terminals nin the same way.
Note. Check the reliable fixation of wires in terminals, connection compliance with polarity
and the absence of contact of bared wires with each other and the metal parts of the
hardware.
• To connect the MSS to a PC, MP3/CD players, first plug the RCA jacks of the 2RCA to mini-jack
Ø 3.5 mm signal cable (included) in the РС audio input jof the active speaker, then plug the mini-
jack of the signal cable to the LINE OUT port of the computer sound card or to the audio OUTPUT of
MP3/CD player terminals (see connection diagram in Fig. 4).
Notes:
• The MSS can be also connected to a PC, МР3/CD-players using the mini-jack to mini-jack
signal cable (not included). To do this first connect one mini-jack of the signal cable to the
AUX line kon the active speaker rear panel, and the second mini-jack to the LINE OUT port
of a PC sound card or to the audio OUTPUT of МР3/CD-players (see diagram in Fig. 4).
• Sound quality is directly affected by correctness and reliability of the connection of
cables. It is recommended that cables included into the package contents of the MSS be used.
• Plug the power cable (included) in the jack m. Then plug the MSS in a mains socket.
• Switch on the MSS by shifting the POWER switch linto the ON position on the active speaker
rear panel. Then switch on an audio signal source.
• Switch on the MSS by pressing the button fon the active speaker control panel or the button b
on the remote control.
Fig. 3. Remote control
ENG
4
2.0 Multimedia Speaker
System
with Bluetooth

POWER
ON
OFF
PC AUX
~100V-240V/50Hz-60Hz
R
L
–
+
SPEAKER OUT
• Select a desired signal source by pressing short the button INPUT fon the control panel or
buttons BT aor PC/AUX don the remote control (RC), after that the LED of the selected input
will illuminate on the control panel: BT a, PC bor AUX crespectively.
• Adjust the volume level with buttons VOL+/- h/ion the speaker control panel or with buttons
VOL+/- eon the remote control (see Fig. 3).
• Adjust the treble and bass levels with buttons TREBLE +/- gand BASS +/- kon the RC. It is also
possible to use buttons VOL-/+ hand ion the speaker control panel by first pressing the MODE
button g; Bass dor Treble eLED will illuminate on the control panel during the adjustment.
• After using the MSS, mind to switch it offwith the ON/OFF switch l(OFF position) and unplug
the power cable from the mains socket.
Bluetooth mode
• For the signal transmission in this mode it is necessary first to interconnect the MSS with a signal
source. For this press and hold the button con the remote control or button gon the top pannel
prior to change the blue LEDs with a constant illumination to intermittent one. The MSS will go to the
search mode. Then on the signal source (telephone, smartphone, etc.) choose the search mode of
devices with Bluetooth. The name of the MSS “SPS-707BL” will be displayed on the signal source
screen, with which you need to intercommunicate*. Select this device and the “connect” command.
• When connecting to the source it is possible to control the player with the remote control using
the buttons f, j.
–+
CD
Phone
Fig. 4. Audio sources connection diagram
Power cable
2RCA to mini-jack
signal cable
Mini-jack to mini-jack
signal cable
PC
PC
Player
Audio cable
* If the MSS has been already listed in the device list of the signal source, then the second activation of
the search mode is not required. Select only this device and the “connect” command. You might have
to enter “0000” code to connect some models of devices via Bluetooth.
ENG
5
Operation Manual SPS-707bL

NFC technology audio transmission
• Turn MSS to the search Bluetooth mode.
• Enable NFC on your smartphone.
• Touch smartphone to the NFC activity field at the upper part
of the speaker (see Fig. 5) and wait for the smartphone
response. It will be automatically made a request for device
connection, click OK, and the device is connected.
• To disable the connection, re-touch smartphone to the NFC
activity field.
PC/AUX mode
• Press the INPUT button fon the top pannel or button
PC/AUX don the RC to turn on PC/AUX mode. PC bor
AUX cselected input LEDs will illuminate on the control
panel during the adjustment.
ST-BY mode
• Press and hold the button fon the top pannel or button bon the RC to select/leave the ST-BY
mode. At the instant of connection, the indicator aon the top panel will change its light to red.
Mute mode
• Press the MUTE button hon the remote control to select the MUTE mode. Press this button h
again to leave the MUTE mode.
Notes:
• Use the sound card Line-Out to increase the sound playback quality.
• The MSS control description can differ from the given one in this Operation Manual due
to the constant improvement of the software. The last version of the Operation Manual see
on www.sven.fi.
BT
+
_
INPUT MODE
CONNECT
VOL– VOL+
PC
AUX
Bass
Tr e b l e
Fig. 5. NFC smartphone
technology connection diagram
ENG
6
2.0 Multimedia Speaker
System
with Bluetooth

If none of the above methods can solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound or the
sound is too quiet.
Distortion of sound.
The remote control
is not working.
Cause
The MSS isn’t connected to a mains
outlet.
The power switch is off.
Volume level is set at minimum value.
No connection via Bluetooth / wrong
connection or selection of an audio
signal source.
Large amplitude of the input signal.
The battery is discharged.
Solution
Check the connection.
Turn on the switch.
Adjust the volume level.
Fulfill the interconnection procedure
via Bluetooth / connect or select an
audio signal source correctly.
Turn down the source volume and
the MSS volume.
Replace the battery with a new one.
6. TROUBLESHOOTING
Output power (RMS), W
Frequency range, Hz
Speaker diameter (tweeter + woofer), mm
Bluetooth version
Bluetooth operating range, m
Power supply, V/Hz
Dimensions (one speaker) (W × H × D), mm
Weight, kg
50 (2 × 25)
45 – 25,000
Ø 25 + Ø 115
2.1 + EDR
till 10
~220/50
160 × 255 × 200
5.2
Value
Parameter, measurement unit
7. TECHNICAL SPECIFICATIONS
Notes:
• Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
• Technical specifications and package contents are subject to change without notice due
to the improvement of SVEN production.
ENG
7
Operation Manual SPS-707bL

Модель: SPS-707BL
Импортер вРоссии: ООО «СКАНДИТРЕЛ», 111024, РФ,
г. Москва, ул. Авиамоторная, д. 65, стр. 1.
Уполномоченная организация вРоссии: ООО «РТ-Ф»,
105082, г. Москва, ул. Фридриха Энгельса, д. 75, стр. 5.
Условия гарантийного обслуживания смотрите
вгарантийном талоне или на сайте www.sven.fi .
Гарантийный срок: 12 мес.
Срок службы: 5 лет.
Производитель: «СВЕН ПТЕ. Лимитед»,
176 Джу Чиат Роуд, №02-02, Сингапур, 427447.
Произведено под контролем «Свен Скандинавия
Лимитед», 48310, Финляндия, Котка,
Котолахдентие, 15. Сделано вКитае.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,
№02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.
2.0 Multimedia Speaker System
Automatic Voltage Regulator
Стабилизатор напряженияСтабилизатор напряжения
Automatic Voltage Regulator
2.0 Multimedia Speaker System2.0 Multimedia Speaker System
SPS-619
SPS-707bL
2.0 Multimedia Speaker
System
with Bluetooth