2N NetSpeaker User manual
22N TELEKOMUNIKACE a.s., www.2n.cz
®
2N® NetSpeaker Quick Start
2N NetSpeaker ® Quick Start
Despite being a robust application for administration of a high number of
(loud)speakers, 2N® NetSpeaker can be ready for playing in a few minutes. The
purpose of the Quick Start manual is to provide easy system installation for use in
home or business environment. Just follow the quick steps below. For advanced
configuration see the at Advanced Configuration manual wiki.2n.cz.
Box Contents
2N NetSpeaker
® unit, and 2x terminal (1x5pin, 1x 4pin*),4 adhesive rubber feet
this . Refer to for the latest controlQuick Start manual www.2n.cz 2N NetSpeaker
®
and playing software version.
What you should know
2N NetSpeaker Server
® requires administrator rights for installation.
The firewall may block the 2N NetSpeaker Server
®
and also connection of the units to2N NetSpeaker
®
the .2N NetSpeaker Server
®
Virtual Network adapters may cause malfunction of
some components.2N NetSpeaker Server
®
2N NetSpeaker Server
® allows you to use all
features of this system for 800 hours, which is a trial
Without licences, you can licence. use up to 5 2N® units and NetSpeaker
1 RTP destination.
Please contact your reseller to get an extended warranty.
Warning!
NetSpeaker version 2.0 not supported downgrade to version 1.5
32N TELEKOMUNIKACE a.s., www.2n.cz
®
* item is not included in 2N® NetSpeaker Lite package (Part No. 914013)
Installation Preparation
You need your unit, a 12V/2A DC power supply or PoE switch 2N NetSpeaker
®(excep
, the UTP cable and a PCt for and )2N NetSpeaker Lite
® 2N NetSpeaker Lite PCB
®
with Windows Vista or later or Windows Server for installation.
System in Network EnvironmentFigure: 2N® NetSpeaker
Installation
2N NetSpeaker Server
® installation and configuration:
Launch the installer on the PC used as a server. 2N NetSpeaker Server
®
After installation you will be asked to restart the PC, so please do that in order to
continue installation.
The Configuration wizard starts automatically after restart 2N NetSpeaker
®
(see the figure below).
42N TELEKOMUNIKACE a.s., www.2n.cz
®
Figure: 2N NetSpeaker Configuration Wizard
®
Follow all the Configuration Wizard steps to configure your system.
2N NetSpeaker Virtual Sound Card
® installation and configuration:
Launch the installation wizard.2N NetSpeaker Virtual Sound Card
®
Start the use the right mouse button to2N NetSpeaker Virtual Sound Card,
®
access the menu and log in using the username and password created by
Configuration Wizard.
Login viaFigure: 2N® NetSpeaker Virtual Sound Card2N NetSpeaker ®
Now you can control in your network (see the figure below)2N NetSpeaker
®
and play music from your favourite player or service.
52N TELEKOMUNIKACE a.s., www.2n.cz
®
Selection via ApplicFigure: 2N NetSpeaker
® Virtual Sound Card 2N NetSpeaker ®
ation
All the above mentioned steps should be sufficient for a successful s2N NetSpeaker
®
etup in your LAN. In the case of troubles or for a more advanced setup please refer to
the manual at or the . 2N NetSpeaker ® wiki.2n.cz 2N NetSpeaker Control Panel
®
2N TELEKOMUNIKACE a.s.
® hereby declares that this product complies with
all basic requirements and other relevant provisions of the 1999/5/EC
directive. For the full wording of the Declaration of Conformity see www.2n.cz.
This device complies with Part 15 of the FCC Rules. Its operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Other manuals for NetSpeaker
8
Table of contents
Other 2N Stereo System manuals
