3Dazer DZ-ID1601-P1 User manual

USER’S MANUAL
Turn your smartphone into
a smart laser measurer
The only app-driven device on
the market

Safety Regulations
Please read these safety regulations and
operation guide carefully before operating.
Please read all of the operation guide and safety regulations
in this manual before operation. Improper operation without
complying with this user’s manual could cause damage to
the device, inuence the measurement result or cause bodily
injury to the user.
The device is not allowed to be disassembled or repaired
in any way. It is forbidden to do any illegal modication or
change the performance of the laser emitter. Keep it out
of the reach of children and avoid use by any unauthorized
personnel.
It is strictly prohibited to aim the laser at the eyes or body of
a person. Do not shoot the laser onto objects with a strong
reection.
Due to an electromagnetic radiation interface to other
equipment and devices, please do not use this device in
a plane or around medical equipment. Do not use in an
inammable, explosive environment.
Discarded batteries or meter devices can not be processed
with other household garbage. Please handle them in
accordance with law and regulations.
For any quality issues or questions about the meter, please
contact your local distributor or manufacturer as soon as
possible. We have solutions to oer you.

Product Technical Specications
Product Name
Model
Distance Measured Range
Distance Measurement Precision
Data Output Rate
Laser Type
Laser Class
Indication Light
Battery
Charging Time
Power
Storage Temperature
Working Temperature
Storage Humidity
Size Dimensions HxWxD
Weight with Built-in Battery
Battery Durability per Charge
Auto Laser Switch-off
Auto Power Switch-off
3Dazer Pro Laser Measurer
DZ-ID1601-P1
4” ~ 260’ / 10cm ~ 80m
± 1/16” / 1.5mm (+distance x 0.0005)
≧2 HZ≤
Class II
635nm, <1mw
Red Laser
Lithium Battery 3.7V 400MAh
≤3 Hours
< 0.6 W
-20 °C -60 °C / -4°F ~ 140 °F
0 °C ~ 40 °C / 32°F ~ 104 °F
RH85%
2.76 x 1.81 x 0.91in / 70 x 46 x 23mm
2.5oz / 58g
Up to 1000 single measurements
After 20 sec
After 15 min
3Dazer Pro

Product Technical Specications
Production Name
Model
Distance Measured Range
Distance Measurement Precision
Data Output Rate
Laser Power
Laser Wavelength
Laser Level
Indication Light
Lithium Battery
Charging Time
Battery Life
Power
Storage Temperature
Working Temperature
Storage Humidity
Battery
Size
3Dazer Home Laser Measurer
DZ-ID1601-H2
4”~165’ / 10cm ~ 50m
± 1/8” ( 3.175 mm )
≧2 HZ≤
< 1 mw
635 nm
Class II
Red Laser
3.7V 350MAh
≤3 Hours
≧800 Times for Single Measurement
< 0.6 W
-20 °C -60 °C
0 °C ~40 °C
RH85%
Built-in Lithium Battery
70 mm x 46 mm x 23 mm
3Dazer Home

Side 1
Side 2
Lens
Laser port
Magnetic holder
Power
Micro-USB port
Charging indicator

Install The Metal Plate Mount
3Dazer provides 2 positions options for attached mode:
• Upper edge
• Bottom edge
Set the position in the app settings and install the metal plate
mount included in the package. Follow the instructions below
to install the metal mount properly. Illustrations are on the
following page.
1. Lift the installation kit and device out of the box, turn
over the device with the backside facing up.
2. Take out one of the metal plate mounts and place it in
the magnetic holder (the slot) on the back of the device
with the adhesive tape side up.
3. Stand the installation kit on a at surface such as table,
desk, or counter top with the appropriate positioning
arrow indicated and then peel o the protective paper
on the plate mount.
4. Stand your phone (with or without the case) on the same
surface and move the kit towards the phone slowly. Make
sure the phone is in the middle of the kit before putting
them together and squeeze for a few seconds before
pulling the kit away.
5. Now the metal plate mount is installed on your phone.
Note: When setting up your account, you will be prompted to indicate
which position you chose. Or change in settings.

...............................................................................................................................
...........................
Plate
Plate
Installing Metal Plate Mount
Installation Kit
1”
In order to use the 3Dazer in attached mode, the metal plate mount must
be adhered to the outside of your phone case—2 options to choose from.
Bottom Edge
Upper Edge
1.Using the lines on
the installation kit
as shown, align your
phone ush with the
surface of the table
and centered.
2.Peel o the protective
lining to expose
adhesive and stick.
1.Using the lines on the
installation kit, align
your phone with the
insert opening allowing
for a 1” gap from
bottom and centered
2.Peel o the protective
lining to expose
adhesive and stick.

How To Measure
Your 3Dazer can either be attached to your mobile or
work separately depending on your situation
Working separately
Working together
Remote
Mode
Attached
Mode

How To Charge Your 3Dazer®
Charger Indicator Light
Steps To Take Measurements
Charge your 3Dazer using the Micro USB cable that comes with
your 3Dazer and the charger cord of your iPhone or Android
During charging, the charger indicator light remains red. Once
fully charged, it will show a green light
1. Download and install the 3Dazer App from the App Store or
Google Play and attach the metal plate mount.
2. Turn on Bluetooth on your phone. Go to phone SETTINGS >
BLUETOOTH, slide the button to “on”.
3. Make sure your 3Dazer has been fully charged and push the
POWER key to turn on your 3Dazer.
4. Tap the “connect “ button on your app home page to connect
the device to your App.
5. Use your phone with 3Dazer and start taking measurements
using the 3Dazer App in either attached or remote mode.
.
6. The measurement results are displayed in the 3Dazer App.
ITEM
3Dazer Laser Distance Meter
Metal Plate Mounts
Installation Kit
Carry Bag
USB Cable
User’s Manual
UNIT
PC
PC
PC
PC
PC
PC
QTY
1
2
1
1
1
1

Award-winning Project Management App
To nd out more how 3Dazer can help you
work more eciently, please visit 3Dazer.com
Bid jobs quicker Manage jobs easier Collaborate better
Smart laser measurer with powerful
app makes an impressive combination

Warranty Information
Warranty under PROTECTION by LAS (Laurel at Sunset)
Lifetime Manufacturer’s Warranty
Warranty coverage for the entire usage time of the product
under PROTECT according to Laurel At Sunset, Inc. Warran-
ty and PROTECT General Terms & Conditions set out under
www.3Dazer.com. Free of charge repair or replacement of
all products or any parts under PROTECT that suer defects
as a result of faults in materials or workmanship.
2 Years No Cost
Additional services should the product under PROTECT
become defective and require servicing under normal
conditions of use, as described in the user manual, at
no additional charge. To receive the “2 Years No Cost”
period, the product under PROTECT must be registered at
www.3Dazer.com within 30 days of the purchase date. If
the product under PROTECT is not registered, a “1 year No
Cost” period applies.
LAS (Laurel at Sunset, Inc.)

Laurel At Sunset, Inc
895 Dove Street, Suite 300,
Newport Beach, CA 92660
Tel: [phone]
email: [email protected]
www.3Dazer.com