3M Multimedia Projector X62w Operating manual

X62w
Multimedia Projector
Product Safety Guide
X62w Projecteur multimedia - Guide de Sécurité de Produit
X62w Multimedia-Projektor - Sicherheitsanleitung des Geräts
X62w Proyector de Multimedia - Guiá de Seguridad del Producto
X62w Proiettore Multimediale - Guida di Sicurezza del Prodotto
X62w Multimedia Projector - Veiligheidsgids op Product
X62w Projector dos Multimedia - Guia da Segurança de Produto
X62w Multimedia-Projector- Bruksanvisning för Produktsäkerhets
X62w 多媒体投影机 - 产品安全指南
X62w 
X62w Multimediaprojektori - Laitteen turvaohjeet

3M™ Multimedia Projector X62w Product Safety Guide © 3M 20062
Table of Contents
ENGLISH
Safety Information ........................................................................................................................................5
Product Safety Labels ...................................................................................................................................9
Lamp ...........................................................................................................................................................10
Replacing Internal Clock battery .................................................................................................................13
Inserting an SD Card and USB Memory .....................................................................................................14
Warranty ......................................................................................................................................................15
FRANÇIS
Mesures de sécurité......................................................................................................................................16
Autocollants de sécurité sur le produit.........................................................................................................20
Lampe ..........................................................................................................................................................21
Remplacement de la pile d’horloge interne .................................................................................................24
Insérer une Carte SD et une Mémoire USB.................................................................................................25
Garntie..........................................................................................................................................................26
DEUTSCH
Sicherheitsanweisungen...............................................................................................................................27
Sicherheitsaufkleber.....................................................................................................................................31
Lampe ..........................................................................................................................................................32
Austausch der internen Uhrbatterie .............................................................................................................35
Einsetzen einer SD-Karte und eines USB-Speichers...................................................................................36
Garantie........................................................................................................................................................37
ESPAÑOL
Infomación de seguridad..............................................................................................................................38
Etiquetas de seguridad del producto ...........................................................................................................42
Lámpara .......................................................................................................................................................43
Reemplazo de la pila del reloj interno .........................................................................................................46
Inserción de una tarjeta SD y USB Memory ...............................................................................................47
Garantía........................................................................................................................................................48
ITALIANO
Informazioni sulla sicurezza ........................................................................................................................49
Etichette di sicurezza del prodotto...............................................................................................................53
Lampada.......................................................................................................................................................54
Sostituzione della batteria dell'orologio interno ..........................................................................................57
Inserimento di una scheda SD e memoria USB...........................................................................................58
Garanzia .......................................................................................................................................................59
NEDERLANDS
Veiligheidsinformatie...................................................................................................................................60
Veiligheidslabels ..........................................................................................................................................64
Lamp ............................................................................................................................................................65
Vervanging Interne Klok batterij .................................................................................................................68
Plaatsen van een SD Kaart en USB Geheugen ............................................................................................69
Garantie........................................................................................................................................................70
PORTUGUÊS
Informações sobre Segurança ......................................................................................................................71
Etiquetas de Segurança do Produto..............................................................................................................75
Lâmpada.......................................................................................................................................................76
Substituição da pilha do Relógio Interno.....................................................................................................79
Inserir um Cartão de Memória SD e Memória USB....................................................................................80
Garantia........................................................................................................................................................81

3M™ Multimedia Projector X62w Product Safety Guide© 3M 2006 3
Table of Contents
SVENSKA
Säkerhetsinformation ...................................................................................................................................82
Produktsäkerhetsetiketter.............................................................................................................................86
Lampan ........................................................................................................................................................87
Byte av batteri för den interna klockan........................................................................................................90
Sätt i ett SD-kort eller ett USB-minne .........................................................................................................91
Garanti..........................................................................................................................................................92
󰉱
󰀲......................................................................................................................................................93
..............................................................................................................................................97
..............................................................................................................................................................99
󰉤󰉴................................................................................................................................101
    ..........................................................................................................................102
󰉅............................................................................................................................................................103

 ..................................................................................................................................................104
.........................................................................................................................................108
............................................................................................................................................................109
....................................................................................................................112
........................................................................................................113
 ..................................................................................................................................................114
SUOMI
Tietoja turvallisuutta varten .......................................................................................................................115
Laitteen turvakyltit.....................................................................................................................................119
Lamppu ......................................................................................................................................................120
Sisäisen kellon pariston vaihto...................................................................................................................123
SD-kortin ja USB-muistin asettaminen .....................................................................................................124
Takuu..........................................................................................................................................................125
󰉱 ENGLISH
FRANÇAIS
DEUTSCHESPAÑOL
ITALIANO
NEDERLANDS
PORTUGUÊS
SVENSKA
한국어
SUOMI

3M™ Multimedia Projector X62w Product Safety Guide © 3M 20064
ENGLISH

3M™ Multimedia Projector X62w Product Safety Guide© 3M 2006 5
Safety Information
Read, understand, and follow all safety information contained in the
“Product Safety Guide” and in the “Operator’s Guide” prior to using
the X62w Multimedia Projector. Service personnel must also read and
understand the safety information contained in the “Service Manual”.
Retain these instructions for future reference.
Intended Use
The 3M™ Multimedia Projector X62w was designed, built and tested for use
indoors, using 3M brand lamps, 3M brand ceiling mount hardware and nominal
local voltages. This projector is not intended for household use or use by children.
The use of other replacement lamps, outdoor operation or different voltages has
not been tested and could damage the projector or peripheral equipment and/or
create a potentially unsafe operating condition.
Explanation of Signal Words and Symbols in Safety Labels and Instructions
WARNING: Indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation, which if not
avoided, may result in minor or moderate injury.
Warning: Hazardous Voltage
Warning: Hazardous High Temperature
Warning: High Pressure
Attention: Refer to Safety Instructions in Guides
ENGLISH

3M™ Multimedia Projector X62w Product Safety Guide © 3M 20066
ENGLISH
ENGLISH
• To reduce the risk associated with choking:
- Keep the battery and battery holder away from children and pets.
• To reduce the risk associated with exposure to hazardous voltage:
- Disconnect power cord when the projector is not in use, during lamp
replacement, and while cleaning.
  
instructions.
- Do not store or operate this projector in wet environments.Do not store or operate this projector in wet environments.
- Do not modify this projector.- Do not modify this projector.Do not modify this projector.
- Do not attempt to service the projector - there are no user serviceable parts,
other than the lamp cartridge, inside the projector. Contact a 3M authorized
service provider for service.
- Do not allow water or other liquids to enter the projector.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
In Canada, contact 1-800-362-3577 (3M Canada)
• Toreducetheriskassociatedwithexposuretohazardousvoltageand/orre:
- Replace power cord if damaged.
- Contact a 3M authorized service provider if the projector becomes damaged.
- Use a grounded extension cord with a rating at least equal to that of the projector.
- Connect this projector to a grounded outlet.
• To reduce the risk associated with hazardous voltage, impact, tripping, and
intense visible light:
- Do not use this projector around unsupervised children.
• To reduce the risk associated with hot surface of lamp cartridge:
- Unplug the projector from the electrical outlet and allow the lamp to cool for 45
minutes before replacing the lamp.
• To reduce the risk associated with a ruptured lamp:
- Always handle the fragile lamp module with care.
- Remove the projector from the ceiling or wall mount before replacing the lamp.
- Use care when replacing the lamp module in the event of a lamp rupture - small
glass particles and small amounts of mercury may be present.
- Ventilate the area where the lamp rupture occurred.
- Wear safety goggles and gloves when cleaning up ruptured lamp debris.
- Carefully collect the ruptured lamp debris in a closed container and dispose of
the container and the expired lamp module in accordance with federal, state,
and local regulations.
- Wash your hands thoroughly after handling ruptured lamp debris.
- Replace the lamp module when the lamp replacement message appears.
- Never replace the lamp module with a previously used lamp module.
WARNING

3M™ Multimedia Projector X62w Product Safety Guide© 3M 2006 7
ENGLISH
ENGLISH
CAUTION
• To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
- Use only with battery type AA, CR2032 or equivalent.Use only with battery type AA, CR2032 or equivalent.
- Orient the battery's plus (+) and minus (-) terminals of the batteries according toOrient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
- Do not leave the battery in the remote for an extended period of time.Do not leave the battery in the remote for an extended period of time.
               
- Do not carry batteries loose in your pocket or purse.Do not carry batteries loose in your pocket or purse.
- Avoid eye and skin contact in the event that battery would leak.Avoid eye and skin contact in the event that battery would leak.
- Do not mix used and new batteries.Do not mix used and new batteries.
• To reduce the risk associated with the impact of a falling projector:
- Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceilingUse only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
mounting is desired.
               
- Adhere strictly to the proper installation procedure as outlined in the installationAdhere strictly to the proper installation procedure as outlined in the installation
instructions when installing the 3M™ wall/ceiling kit.
             
• To reduce the risk associated with intense visible light:
- Avoid looking directly into the projector lens while the lamp is on.Avoid looking directly into the projector lens while the lamp is on.
• To reduce the risk associated with tripping and/or impact:
- Position the power cord and data cable so that they cannot be tripped over.Position the power cord and data cable so that they cannot be tripped over.

3M™ Multimedia Projector X62w Product Safety Guide © 3M 20068
ENGLISH
Important Note
1. Always open the lens shutter or remove lens cap when the projection lamp is on.
2. To avoid premature lamp failure, do not change the mounting position of the
projector (desktop ceiling mount or ceiling desktop mount) and continue to use the
same lamp.
 
4. To avoid reduced image quality, do not touch projection lens or other internal
optical components.
5. Do not use detergents, chemicals, or any spray liquids for cleaning this unit, other
than those referred to in the “Operators Guide”.
6. For maximum lamp life, do not strike or drop, improperly handle, or scratch the
lamp glass. Also, do not install an old or used lamp.
 
Guide”.
8. Keep all ventilation openings free of any obstructions.
9. In some countries, the line voltage is NOT stable. This projector is designed to
operate safely within a bandwidth of 100 to 120 volts / 220 to 240 volts (50 to 60
Hz) ±10%, but could fail if power drops or surges of ±10 volts occur. In these high-
risk areas, it is recommended to install a power stabilizer unit.
10. Do not block intake or exhaust air vents. This will cause the projector to over heat
and shut down.
11. Do not place the projector in direct sunlight or near a hot object such as a heater.
12. To prevent damaging the projector, always hold the projector whenever using the
elevator buttons to adjust the elevator feet.
13. Use the accessory cable or a designated-type cable for the connection. Some
cables have to be used with core set. A too long cable may cause certain picture
degradation. Please consult with your dealer for details. For cables that have a
core only at one end, connect the core to the projector.
14. Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
15. Do not place the projector in the side/front/rear-up position, except care of the air


3M™ Multimedia Projector X62w Product Safety Guide© 3M 2006 9
Product Safety Labels
ENGLISH
C
R
/P
R
C
B
/P
B
AUDIO IN2
AUDIO IN1
RGBIN1RGBIN2
SDCARD
AUX I/O
DC5V0.5A
LAN
CONTROL
RGB OUTAUDIO OUT
USB
VIDEO
S-VIDEO
AC IN

3M™ Multimedia Projector X62w Product Safety Guide © 3M 200610
Lamp
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
In Canada, contact 1-800-362-3577 (3M Canada)
WARNING
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the “OPTION” using the ▼ button, and press the ► button or the ENTER button.
Choose the “LAMP TIME” using the ▼ button.
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
Note
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication about the lamp.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
(2) Point at the “Go To Advance Menu …” in the menu using ▼/▲ button, then press the
► button.
(3) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press
the ► button.
(4) Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will
appear.
(5) Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp
time.
ENGLISH