3xLogic V250-16 User manual

Package Contents Before You Begin
1. Connect all cameras to PoE Camera Switch with Cat5, Cat5e, or Cat6
networking cable.
2. Connect one of the Corporate LAN Ports to your Site LAN.
3. Connect a monitor to either HDMI and / or VGA.
4. Connect your mouse and keyboard (included) to the rear USB 2.0 (black)
ports.
5. Connect power.
a. The V250-16 will automacally power on and boot into a Wizard which will
guide you through the conguraon of your video recorder.
PART NAME FUNCTION
1Power Shows the Power On/O Status
2 HDD Blinks to indicate usage of the Hard Drive
3 Link Shows Network Connecvity
4 Tx/Rx Blinks to indicate network usage
5 USB USB 2.0 port
1 2 3 4 5
NVR
POWER CABLE
RACK MOUNT EARS
MOUSE
KEYBOARD
TERMINAL BLOCK (FOR ALARMS)
Geng Started | V250-16
Quick Start Guide

PART NAME FUNCTION
1 Internal PoE Switch (16 Port) Connect to IP Cameras
2 Audio In Connect Microphone
3 RS 232 Serial Communicaons Port
4 Alarm I/O Connect to Termnal Block
5 Corporate LAN Port 1 Connect to Site LAN
6 Power Supply Provide Power to the Appliance
7 Audio Out Connect to Speakers
8 HDMI / VGA Connect to Monitor
9 Corporate LAN Port 2 Connect to Site LAN
10 USB 3.0 x2 Connect External Storage for Export
11 USB 2.0 x2 Connect Keyboard and Mouse
12 Power On / O Switch Turn Appliance On / O
BACK PANEL CONNECTION DIAGRAM | V250-16
12000 Pecos St, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
© 2018 3xLOGIC, Inc. All rights reserved. Informaon in this document is subject to change without noce. 3xLOGIC and the 3xLOGIC logo are trademarks of
3xLOGIC, Inc. All other trademarks are the property of their respecve owners. Revised: December 6, 2018 3:24 PM V2
NOTE:
A USB drive containing the 3xLOGIC Support
Environment is connected within the chassis. To access
the Support Environment, simply boot to the drive.
The Support Environment allows for Windows images
to be taken or applied as well as providing access to
mulple diagnosc tools.
811
5
12
2
10
6
7
3
14
USB DRIVE
POS
9