3xLogic V250 User manual

Package Contents Before You Begin
1. Connect all cameras to PoE Camera Switch with Cat5, Cat5e, or Cat6
networking cable.
2. Connect the Corporate LAN Port to your Site LAN.
3. Connect a monitor to either HDMI or VGA (only one will funcon at a me).
4. Connect your mouse and keyboard (included) to any of the three rear USB
ports.
5. Connect power.
a. The V250 will automacally power on and boot into a Wizard which will
guide you through the conguraon of your video recorder.
PART NAME FUNCTION
1Power Shows the Power On/O Status
2 HDD Blinks to indicate usage of the Hard Drive
3 Link Shows Network Connecvity
4 Tx/Rx Blinks to indicate network usage
5USB USB 2.0 port
1 2 3 4 5
NVR
POWER CABLE
RACK MOUNT EARS
MOUSE
KEYBOARD
TERMINAL BLOCK (FOR ALARMS)
Geng Started | V250 GEN 2
Quick Start Guide

PART NAME FUNCTION
1 Corporate LAN Port Connect to Site LAN
2 RS-232 Serial Communicaons Port
3 Audio Out Connect to Speakers
4 Alarm I/O Connect to Terminal Block
5USB 3.0 Connect External Storage for Export
6USB 2.0 Connect Mouse and Keyboard
7 HDMI/VGA Connect to Monitor
8 Audio In Bring in Audio Through Mic
9 Internal PoE Switch Connect to IP Cameras (Available in 4 and 8 port)
10 Server Power Toggle Power to Appliance
11 Power Power to the Appliance
12 PoE Power Toggle Power to PoE Switch
76 9 10 1285
11
321 4
POS
USB DRIVE
BACK PANEL CONNECTION DIAGRAM | V250 GEN 2
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
© 2015 3xLOGIC, Inc. All rights reserved. Informaon in this document is subject to change without noce. 3xLOGIC and the 3xLOGIC logo are trademarks of
3xLOGIC, Inc. All other trademarks are the property of their respecve owners. SS10033-1.0 Revised: June 25, 2015 2:58 PM