4D Concepts 71550 User manual

NEED ASSISTANCE ?
4 DC
MODEL: 71550
Call 4D CONCEPTS directly for parts or assembly assistance.
Individual stores do not stock parts
Call our Toll-free number 5 days a week except holidays:
Monday through Friday 8.00am to 5.00pm
Pacific Standard Time
1-888-310-4DCOor1-888-3104326
IMPORTANT: Before calling please have the model number
and the packing code number ready for our customer service representatives.
You will find the model number printed on the carton label and the packing
code printed in black ink on the side of the carton.
Model 71550 Packing code
It is important that you retain the model number and the packing code
along with the original receipt of purchase for future reference.
Made in China
METAL RETRO GLIDER (Red Coral)
page 1
Dimensions:
42”(L) x 27”(W) x 35.5”(H)

71550 ASSEMBLY INSTRUCTION
PARTS LIST:
(A) Right Back Qty: 1 (B) Left Back Qty: 1
HARDWARE LIST:
2. Bolt
6 x 35 mm Qty: 2
page 2
3. Bolt
6 x 48 mm Qty: 8
5. Washer Qty: 38 6. Nut Qty: 22
1. Bolt
6 x 15 mm Qty: 4
(C) Right Seat Qty: 1 (D) Left Seat Qty: 1
(F) Left Arm Qty: 1 (G) Connecting
Tube Qty: 2 (H) Flat Metal
Bar with Hook
(for Seat)
Qty: 1
8. Spanner Qty: 1 7. Round top nut Qty: 2
(E) Right Arm Qty: 1
(I) Flat Metal
Bar (for Back)Qty: 1 (J) Arm Cover Qty: 2
4. Bolt
6 x 55 mm
Qty: 14
(K) Seat Frame
Support Qty: 1

Attach the two side frames on connecting tube (G) on both
sides with bolt (4) on the outside, washer (5) and nut (6) on
the inside. Assembles as shown.
The best assembly way is to attach one arm side frame to
both connecting tubes (G) firse.After fixing, attach another
arm side frame to both connecting tubes (G).
Step 1
Place the flat metal bar (H) with hook in one end and connect
two seat panels with bolt (1) and washer (5) and nut (6) on
other side.
Step 2
page 3
ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR.
G
G
E
F
1 2
Item Drawing Qty
5 4
6 2
4 8
Item Drawing Qty
5 8
6 8
4
4
4
4
56
565
6
5
6
H
CD
6 5 5 1
H
C D
6 5 5 1
6 5 5 1

Turn the connected seat panel over and place the seat frame
support (K) on the bottom of the seat as shown in diagram.
Secure the seat frame support with the seat panel with bolt
(1), washer (5) and nut (6).
Step 3
Attach the seat bottom to the hooks of the support frame.
Step 4
page 4
K
CD
H
H
KCD
1 4
Item Drawing Qty
5 8
6 4
65
6
5
5 1 15
ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR.

Attach the seat bottom on arms with bolt (1) and washer (5).
Assembles as shown.
Step 5
Place the flat metal bar (I) in one end and connect two back
panels with bolt (1) and washer (5) and nut (6) on other side.
Step 6
page 5
C
D
E
F
AB
I
1 2
Item Drawing Qty
5 4
6 2
51
15
6 5 5 1
6 5 5 1
1 4
Item Drawing Qty
5 4
ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR.

IMPORTANT:
Exposure to harsh weather conditions may encourage rusting of the steel metal components.
Protection from these conditions is recommended.
Plug the seat back’s center bar (I) into the hole of center bar
(H) on seat bottom. Tighten the bar with bolt (1) washer (5)
and nut (6).
Then fix the seat back with arm side frames with bolt (2) the
outside, washer (5) and nut (6) on the inside. Assemble as
shown.
Step 7
Carefully line up the holes in arm cover (J) with holes on
arm frame (E/F), using a quick downward push, snap cover
over frame. Attach arm holder to each side frame with the
bolt (4). Then washer (5) and round top nut (7) should be
used underneath the arm cover. Assemble as shown.
Step 8
page 6
AB
H
E
F
E
F
J
J
3 2
Item Drawing Qty
5 2
7 2
65
51
65
2
2
65
I
3
5
7
3
5
7
1 2
Item Drawing Qty
5 8
6 6
2 4
ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR.