707 IC211 Manual

1
User Manual
& Instructions
Induction Cooker
IC211
• This booklet should be retained by the user for future reference.
• Please read all instructions carefully before operation.

2
Introduction
Thank you for choosing our product. Please read this user manual carefully prior to the use
of the product. This product is intended for household use only.
Safety Precautions:
• Do not touch the device and the power plug with wet hands.
• Do not connect the device to the same outlet with other devices. Connect the device to a
suitable outlet.
• Do not move the device by pulling on the power cable.
• Do not move the induction hotplate during cooking or with hot cookware on top of it.
• Do not place any empty containers on the device.
• Do not place any metal objects on the device.
• Check the mains connection cable for damage from time to time. Never operate the device
when the cable is damaged. If the mains connection cable shows defects, let a qualified
electrician exchange it.
• Never use the device when it is not functioning properly, shows signs of damage or when it
was dropped before.
• Do not leave the device unsupervised during operation. Individuals (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not operate the device, unless under supervision and instruction from their guardians.
• Do not submerge the device in water or other liquids and do not wash it in the dishwasher.
• Do not operate the device on any metal table.
• Only qualified experts may perform repair and maintenance work on the device using
original replacement and accessory parts. Never attempt to repair the device yourself!
• Do never heat sealed food such as canned goods before opening their covers.
• The appliance is not intended to be operated by means of an external timer or separate
remote control system.
Production Specification:
Model: IC211
Voltage: 220-240V~50/60Hz
Power output: 2100Watt
Installing the device
• Place the device on a stable and level surface.
• Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).

3
• Do not block the ventilation slots of the device. This may overheat the device. Keep a Min.
distance of 5 to 10 cm to walls or other items.
• Do not place the device hotplate next to devices or objects, which react sensitively to
magnetic fields (e.g. radios, TVs, cassette recorders, etc.).
• Do not operate the device on top of any other electric appliances such as ceramic hob or
electronic oven etc.
• Do not operate the device on any metallic surface which is too thin and easy to become
deformed.
• Do not place the device next to open fires, heaters or other sources of heat.
• Make sure that the mains connection cable is not damaged or squashed beneath the
device.
• Make sure that the mains connection cable does not come into contact with sharp edges
and/or hot surfaces.
Commissioning the device
• Prior to connecting the device, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to damage
on the device and injury to persons.
• The induction hotplate's surface consists of temperature-resistant ceramics.
In case of damage, even if it is a small crack, disconnect the device from the power supply
immediately and contact the customer service.
• It is recommended not to place any metal kitchen utensils, cookware or pan lids, knives or
other metal objects on the induction hotplate. These may heat up when the device is turned
on.
• Do not place any magnetic objects like credit cards, cassettes etc. on the glass surface
while the device is in operation.
• In order to avoid overheating, do not place any aluminium foil or metal plates on the device.
• Do not insert any objects like wires or tools into the ventilation slots as this may cause
electric shocks.
• Do not touch the surface of the induction hotplate. The induction hotplate itself does not
heat up during cooking, but it gains heat from the heated cookware.
• Do not heat up any unopened cans on the induction hotplate. A heated can could explode;
therefore remove the lid under all circumstances beforehand.
• It is tested that induction cookers do not pose a risk to human health.
However, individuals with a pacemaker should keep a minimum distance of
60 cm to the device while it is in operation.

4
Operation
• Plug the power plug into a suitable outlet.
• The indicator light of the “Power”button will lit and the display will show ‘- - - -‘ with a ‘beep’
sound to the device is now in standby mode.
• Place suitable cookware that is magnetic in the centre of the induction hotplate.
• Press the “Power” button to turn on the device. The ‘Hotpot’ indicator will lit and the display
will show ‘2100’ with the ‘Watt’ indicator lit.
• ‘Hotpot’ function is feasible for hotpot. You can adjust the heat by pressing ‘+’ and ‘-‘. The
power watts will increase or decrease; watts increases means heat increases. You may also
set timer for hotpot; press the ‘Preset/Timer’ button; press once to set one minute timer,
press again to set two minute timer, and press again to increase the timer setting. Press
‘Cancel’ button to stop the timer function. Timer function will cause the device to turn off
automatically once the time is up.
• Press the ‘Function’ button to change from ‘Hotpot’ to ‘Fry’ and the ‘Fry’ indicator will lit.
This ‘Fry’ function is applicable for high-temperature cooking such as frying. The display will
show ‘240’ which is the temperature and the ‘Temp’ indicator will lit. You may adjust the
temperature; press the ‘+’ and ‘-‘ to increase or decrease the heat. You may also set timer;
press the ‘Preset/Timer’, press once to set one minute timer, press again to set two minute
timer, and press again to increase the timer setting. Press ‘Cancel’ button to stop the timer
function.
• Press the ‘Function’ button to select ‘Stir-Fry’ function. The display will show ‘2300’ and the
‘Watt’ indicator will lit. This function is suitable for high-temperature frying. After 3 minutes of
stir fry, the device will automatically go to ‘Stir’ function.
• Press the ‘Function’ button to select ‘Stew’ function. This function is for slow fire cooking.
The display will show ‘ :10’ (timer is 10 minutes) and the ‘Timer’ indicator will lit. Increase the
timer set time by pressing ‘Preset/Timer’ button and the maximum timer is 2 hours.
• Press the ‘Function’ button to select ‘Porridge’ function. The display will show ‘P- -‘ only.
You cannot adjust the temperature, watt or set any timer. This function is suitable for cooking
porridge, press the ‘Power’ button to stop the function.
• Press the ‘Function’ button to select ‘Milk’ function. The display will show ‘P- -‘ only. You
cannot adjust the temperature, watt or set any timer. This function is to preserve the warmth
of the milk (maximum 350ml). Press the ‘Power’ button to stop the function.
Cleaning and maintenance
• Remove the power plug prior to cleaning the device. Do not use any caustic cleaning
agents and make sure that no water penetrates the device.
• To protect yourself from electric shock, never immerse the device, its cables and the plug
in water or other liquids.
• Wipe the induction hotplate with a damp cloth or use a mild, non-abrasive soap solution.
• Wipe the casing and the operating panel with a soft cloth or a mild detergent.

5
• Do not use any caustic products to avoid damage of the plastic parts and the
casing/operating panel.
• Do not use any flammable, acidic or alkaline materials or substances near the device, as
this may reduce the lifespan of the device and cause fire when the device is turned on.
• Make sure that the bottom of the cookware does not scratch across the surface of the
induction hotplate, even though a scratched surface does not impair the use of the device.
• Make sure that the device is properly cleaned before storing it in a dry place.
REMARKS:
• POWER FUNCTION: DEFAULT MAX.TEMP. AT 170°C, SO FOR STEAMING
FOOD OR BOILING WATER, PLEASE SELECT POWER FUNCTION DIRECTLY
• TEMP. FUNCTION: DEFAULT MAX.TEMP. AT 240°C, SO FOR GRILLING OR
DEEP FRYING FOOD, PLEASE SELECT TEMP. FUNCTION DIRECTLY
• PLEASE USE FLAT COOKWARE WITH BASE THICKNESS OVER 1.53MM
• PLEASE DISCONTINUE USAGE IN THE EVENT OF DEVICE OVERHEATING
• PLEASE PLACE COOKWARE ON DEVICE BEFORE OPERATION AND DO NOT HEAT
EMPTY COOKWARE
PLEASE DO NOT USE INDUCTION COOKER ON ANY METALLIC SURFACE.