A.O. Smith BTI - 100 User manual

Innovation has a name.
BTI
Light commercial atmospheric
water heater
BTI - 65/85/100
Atmospheric water heater, primarily intended for light commercial /
industrial applications • Control, high limit and energy cut-off
thermostats to ensure safe operation • Safety sensor to prevent fl ue
spillage • Stainless-steel burner for natural or LP gas • Waterway
access cover for comprehensive waterside tank maintenance
• Replaceable magnesium anode • Fully automatic spark ignition
to minimise standing losses • General fault indicator light
• Optional ancillaries: Unvented kits • Destrati cation pump kit
• Powered anode • Time clock kit • Flue fan kit • Time clock
kit/7 day timer to minimise standing losses

BTI
Technical specications
Gas data natural gas 2H (G20)
Input* kW 18.1 23.1 27.4
Output kW 12.7 16.2 19.2
Inlet pressure mbar 20 20 20
Burner pressure mbar 12 11,5 10
Gas consumption** m3/h 1.7 2,2 2.6
Diameter pilot orice mm 0.56/0.41 0.56/0.41 0.56/0.41
Diameter main orice mm 3.4 3,9 4.5
Max. flue gas temperature °C 265 275 275
Flue gas discharge kg/h 27 55.2 53.2
Gas data butane 3+ (G30)
Input* kW 17.2 21.8 29.6
Output kW 12.3 15.7 21.2
Inlet pressure mbar 30 30 30
Burner pressure mbar - - -
Gas consumption** kg/h 1.3 1.6 2.2
Diameter pilot orice mm 0.23 0.23 0.23
Diameter main orice mm 1.9 2.2 2.5
Max. flue gas temperature °C 265 275 275
Flue gas discharge kg/h - 81.1 74.8
Gas data propane 3+ (G31)
Input* kW 16.4 20.9 28.6
Output kW 11.7 15 20.4
Inlet pressure mbar 37 37 37
Burner pressure mbar - - -
Gas consumption** kg/h 1.2 1,5 2,0
Diameter pilot orice mm 0.23 0.23 0.23
Diameter main orice mm 1.9 2.2 2.5
Max. flue gas temperature °C 265 275 275
Draw-off capacity
Storage capacity l 178 265 355
Max. temperature setting °C 80 80 80
30 min. ∆T=44°C l 281 396 508
60 min. ∆T=44°C l 405 554 713
90 min. ∆T=44°C l 529 713 871
120 min. ∆T=44°C l 652 871 1070
Continuous ∆T=44°C l/h 247 375 399
Heating-up time ∆T=44°C min. 43 42 53
30 min. ∆T=50°C l 248 348 447
60 min. ∆T=50°C l 356 488 612
90 min. ∆T=50°C l 465 627 777
120 min. ∆T=50°C l 574 767 992
Continuous ∆T=50°C l/h 218 330 351
Heating-up time ∆T=50°C min. 49 48 61
30 min. ∆T=55°C l 225 317 406
60 min. ∆T=55°C l 324 443 556
90 min. ∆T=55°C l 423 570 706
120 min. ∆T=55°C l 522 697 856
Continuous ∆T=55°C l/h 198 300 319
Heating-up time ∆T=55°C min. 54 53 67
Electrical data
Power consumption W 30
Power supply VAC/Hz 230(-15/+10%) / 50
General
Anodes - 1
Maximum working pressure bar 8
Maximum weight kg 266 382 499
Shipping data
Weight empty kg 93 122 149
Weight incl. packaging BTT / BTI kg 105 140 167
Width packaging mm 670 780 780
Height packaging mm 1690 1640 1830
Depth packaging mm 730 870 870
BTI 65 BTI 85 BTI 100
* Gas data on gross value ** Gas consumption at 15°C and 1013.25 mbar

BTI
Dimensions
A 1680 1585 1780
B 1510 1450 1640
D 520 645 675
E 655 770 775
G 100 130 130
K 340 340 340
M 1540 1505 1685
N 1540 1505 1685
R 295 285 285
S 1330 1280 1460
1 Cold water (external) 3/4-14 NPT 1-11.5 NPT 11/4-11.5 NPT
2 Hot water (external) 3/4-14 NPT 1-11.5 NPT 11/4-11.5 NPT
3 Gas control (internal) Rp1/2
4 Tank drain valve (internal) 3/4-14 NPT
5 T&P valve (internal) 3/4-14 NPT
Dimensions in mm. All BTI water heaters receive a three years
warranty on the tank and one year on parts.
BTI 65 BTI 85 BTI 100

3 T&P valve
4 Stop valve
5 Non-return valve
6 Circulation pump
9 Drain valve
10 Gas cock
11 Isolating valve
14 Hot water outlets
17 Three way valve
18 Water tank
19 Float valve
A Cold water
B Hot water
C Return circulation
D Gas supply
E Overflow pipe
H Expansion vent pipe
A BTI water heater should be installed in accordance with
local standards and ventilation requirements (category
B11BS).
Further installation and connection details can be found
in the Installation & Commissioning Manual.
BTI
Installation diagram
Vented

BTI
Installation diagram
Unvented
1 Pressure reducing valve
3 T&P valve
4 Stop valve
5 Non-return valve
6 Circulation pump
9 Drain valve
10 Gas cock
11 Isolating valve
14 Hot water outlets
15 Expansion relief valve
16 Expansion vessel
A Cold water
B Hot water
C Return circulation
D Gas supply
A.O. Smith unvented system kits utilise combination valves.
A water heater should be installed in accordance with
local standards and ventilation requirements (category B11BS).
Further installation and connection details can be found in
the Installation & Commissioning Manual.

www.aosmithinternational.com
Data subject to change INT/0808/BTI/01 Terms and conditions apply, please refer to our website.
BTI
Electrical diagram BTI
A Ignition controller
B ON/OFF switch
C Pilot burner
D Spark electrode
E Flame probe
F Transformer flame detection
(optional)
G Combustion products discharge
safety device
H Control thermostat
K Safety thermostat
L Timer (optonal)
M Remote button
N Terminal block
P Terminal block
R Earth terminals
S Connector to ignition controller
T Gas control valve
U Connection strip
V Tank earth
W Casing earth
X Control panel base plate earth
For the parts numbers of components
please refer to the “Maintenance and
accessories” chapter.