A.O. Smith Series 100/101 User manual

HIGHEST RECOVERIES AND FIRST HOUR RATINGS
Capacity/input combinations up to 98 gallons/75,100 BTUs produce
recoveries up to 81 gallons per hour, with deliverable hot water up
to 150 gallons.
DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made from long-
lasting PEX cross-linked polymer.
GREEN CHOICE® GAS BURNER
Patented “Eco-Friendly” design reduces NOx emissions by up to 33% and complies with
less than 40 ng/j requirements for NOx emissions.
COREGARD™ ANODE ROD
A. O. Smith’s exclusive aluminum anode has a stainless steel core, protects tank
against corrosion longer versus ordinary anodes.
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
Standard on FVIR compliant models.
DURABLE, TAMPER-RESISTANT BRASS DRAIN VALVE
THICK, “ENVIRONMENTALLY-FRIENDLY” NON-CFC FOAM INSULATION
Improves efficiency.
BLUE DIAMOND®GLASS COATING
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
Top-mounted T&P Relief Valve available as option on FVIR compliant models.
CODE COMPLIANCE
DESIGN CERTIFIED BY CSA INTERNATIONAL
ANSI Z21.10.1 - CSA 4.1 Standards governing storage-type water heaters.
6-YEAR LIMITED TANK AND PARTS WARRANTY
For complete information, consult written warranty or A. O. Smith Water Products
Company.
FVIR COMPLIANT
See other side. ®
Residential Gas Water Heaters
Revised April 2011
Page 1 of 2
AOSRG45400
HEAT TRAP NIPPLES
Factory-installed on most models.
Series 100/101
FEATURES
®
UBC, CEC, SBCC, CABO, HUD and BOCA National codes. Meets the thermal efficiency and
standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA
90.1 and meets the Federal Energy Efficiency Standards effective January 20, 2004,
according to the National Appliance Energy Conservation Act (NAECA) of 1992.
Low Lead Content
Provides superior resistance compared to industry standard glass lining.
®

MODEL
NUMBER
FIRST
HOUR
RATING
GALLON
CAPACITY
RECOVERY
90°F RISE
PER HOUR
ENERGY
FACTOR
BTU INPUT
PER HOUR
NATURAL †
R
VALUE A B C D E F
APPROX.
SHIPPING
WEIGHT
HOT CONNECTION
COLD
CONNECTION
ANODE ROD*
E
*Location for optional top-mounted
T&P Valve if ordered from factory.
BA
F
D
1/2" GAS
CONNECTION
T&P VALVE
C
(FVIR models only)
FVIR design meets American National Standards Institute standards
(ANSI Z21.10.1 - CSA 4.1) that deal with the accidental or
unintended ignition of flammable vapors, such as those emitted by gasoline.
FVIR gas water heaters feature a sealed combustion chamber with air intake
screen and a fireproof Corderite flame arrestor built into the water heater base.
In addition, a thermal cutoff (TCO) device, integral with the thermocouple, is
designed to shut off gas flow to the burner and pilot if poor combustion is detected.
Flammable Vapor Ignition Resistant (FVIR)
Water Heaters
If flammable vapors
accidentally enter the
combustion chamber,
the Corderite flame
arrestor is designed
so flames burn off
the top surface and
cannot escape down
through the arrestor.
A. Easy-to-light
piezo ignitor
B. View port for easy
burner inspection
inside sealed
combustion chamber
Recovery capacity based on actual performance tests. Water Connections – 1" on 75-gallon model, 1-1/4" on 100-gallon model, 3⁄4" on all other models.
* Not equipped with FVIR Technology. 75 and 100-gallon models have factory-installed (non-heat trap) nipples, 75-gallon model has 80% efficiency,
998 BTU/hr. standby loss; 100-gallon model has 80% efficiency, 1146 BTU/hr. standby loss.
† Propane Gas – GCVT-40: 45,000 BTU input; GCVT-50: 45,000 BTU input; GCVX-50: 55,000 BTU input; GCV-65: 62,500 BTU input.
For 10-Year Tank and 6-Year Parts Warranty, change “G” to “X” in Model Number (example: XCVT-40), or change “F” to “P” in model number (example: PCG-75).
DIMENSIONS (INCHES)
DRAFT
HOOD
OUTLET
(LBS)
(GPH)
www.hotwater.com
For Technical Information and Automated Fax Service, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
Residential Gas Water Heaters
Revised April 2011 Page 2 of 2
AOSRG45400
The FVIR Series 100 models are certified from sea level to 7,700 ft. elevations. The FVIR Series 300 models are certified from sea level to 10,100 ft. elevations.
For high attitude versions of the 75 & 100-gallon models add SMR “S19”
®
GCVT-40 75 40 51 0.60 50,000 16 61-3/4 58-1/4 20 13-1/4 8 51-3/4 4138
300
SERIES
GCVT-50 90 48 51 0.58 50,000 8 60-7/8 56-1/2 20 13-3/8 8 50-3/8 4
GCVX-50 93 50 67 0.58 65,000 16 63-7/8 59-1/2 22 15-1/2 8 54-1/8 4
GCV-65 116 65 67 0.57
65,000 16
65 60 24 15-1/2 8 54-1/4 4
FCG-75* N/A 74 81 N/A 75,100 16 61 57 26-1/2 14-3/4 16 50-1/4 4
FCG-100* N/A 98 81 N/A 75,100 10 68-1/2 65 27-3/4 15-3/16 16 57-3/8 4
172
195
215
275
350
100
100
100
300
300