AAA Storage Sheds Folding Chair User manual

Folding Chair Assembly Instructions
Tools needed:
• Hex Key Wrench
(Enclosed in Bag)
• #2 Square Drive
Screwdriver or
Power Drill ∕ Driver
Package Contents
Hardware Package
1 - Screw Bit (I)
1 - Seat and Back Assembly (A)
1 - Right Arm Assembly (B)
1 - Le Arm Assembly (C)
1 - Front Leg Crosspiece (D)
(B)
(A)
(C)
2 - 2½"Bolts (G)
2 - 1½"Bolts (F)
4 - 1¾"Wood Screws (E)
1 - Hex Wrench (H)

Step 2
Open the chair to the position shown above.
Attach the arm to the center crosspiece on the
back using one (G) bolt on either side.
NOTE: The arm needs to be attached with the half
moon cutout facing in towards the seat. (Please see
photo of chair on the front page)
Step 3
Attach the front leg crosspiece to the legs using four
(E) wood screws.
NOTE: The legs have pre-drilled pilot holes.
Step 1
Long
Bolt (G)
Attach the front leg to the seat using one (F) bolt on
either side.
Short
Bolt (F)