Aaeon FWS-7810 User manual

Network Appliance
FWS-7810
FWS-7810
1U Rackmount
Network Appliance Platform
2 SATA 6.0 Gb/s, 2 USB3.0
1 PCI-E[x8] (Optional)
1 NIM (Optional)
FWS-7810 Manual 1st Ed.
December 2013

Network Appliance
FWS-7810
i
Copyright Notice
This document is copyrighted, 2013. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Network Appliance
FWS-7810
ii
Acknowledgments
All other products’name or trademarks are properties of their
respective owners.
AMI is a trademark of American Megatrends Inc.
CompactFlash™is a trademark of the Compact Flash
Association.
Intel®, Core®, and Xeon Quad Core, are trademarks of Intel®
Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ISoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.

Network Appliance
FWS-7810
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
1 FWS-7810
1 DVD-ROM for manual (in PDF format) and drivers
2 SATA HDD Cable
2 Serial ATA Cable
1 RJ-45 Console Cable
1 CPU Heatsink
1 Ear Bracket Module, Black
If any of these items should be missing or damaged, please contact
your distributor or sales representative immediately.

Network Appliance
FWS-7810
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Features .................................................................... 1-3
1.3 Specifications ............................................................ 1-4
1.4 General System Information ..................................... 1-7
Chapter 2 Quick Installation Guide
2.1 Safety Precautions.................................................... 2-2
2.2 Location of Connectors ............................................. 2-3
2.3 Mechanical Drawings of FWS-7810.......................... 2-5
2.4 List of Jumpers.......................................................... 2-6
2.5 List of Connectors ..................................................... 2-6
2.6 Setting Jumpers ........................................................ 2-8
2.7 Clear CMOS (CMOS)................................................2-9
2.8 Auto Power Button (JP2)...........................................2-9
2.9 Front Panel Connector (FP1)....................................2-9
2.10 Front Panel Connector (FP2)..................................2-9
2.11 USB3.0 Port PIN Header ........................................2-10
2.12 Installing the CPU and the Heat Sink ..................2-11
2.13 Installing the Two 2.5” Hard Disk Drive (HDD) .......2-17
2.14 Installing the Network Interface Module (NIM)........2-22
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization ................................... 3-2

Network Appliance
FWS-7810
v
3.2 AMI BIOS Setup........................................................3-3
Chapter 4 Driver Installation
4.1 Installation .................................................................4-3
Appendix A Programming the Watchdog Timer
A.1 Watchdog Timer Initial Program ............................A-2
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments...................................B-8
Appendix C Standard LAN Bypass Platform Setting
C.1 Status LED............................................................ C-2
C.2 LAN Bypass.......................................................... C-4
C.3 LCD Module.......................................................... C-9
C.4 Software Reset button (General Propose Input) C-12

Network Appliance
FWS-7810
Chapter 1 General Information 1- 1
General
Information
Chapter
1

Network Appliance
FWS-7810
Chapter 1 General Information 1- 2
1.1 Introduction
FWS-7810 adopts Intel® 4th generation Core™/ Xeon series
processor. The chipset is equipped with Intel®C226. In addition, the
system memory features four 240-pin ECC DDR3 1333/1600 MHz
DIMM up to 32GB and supports dual-channel. FWS-7810 deploys
eight Gigabit Ethernet ports (optional up to 2 pairs LAN bypass
function). The condensed appearance of FWS-7810 features 1U
form factor that fits nicely into a space-limited environment.
This compact FWS-7810 is equipped with two SATA6.0 Gb/s
(optional up to 3 SATA ports). In addition, it offers flexible
expansion with network products and features one optional
PCI-E[x8] slot and one optional Network Interface Module (NIM)
slot, two USB3.0 ports and one RJ-45 for console. The console
port deploys console re-direction that increases the network
security via remote control. Moreover, there is a front panel
support LCM with keypad control that allows for easy access and
operation. All of these designs provide for a more user-friendly
solution.

Network Appliance
FWS-7810
Chapter 1 General Information 1- 3
1.2 Features
1U Rackmount 8 LAN Ports Network Appliance
Intel®4th Generation Core™ /Xeon Processor
240-Pin Dual-Channel ECC DDR3 1333/1600MHz DIMM x 4
(Up To 32 GB)
Gigabit Ethernet x 8 with Optional 2-Pair LAN Bypass
Function
SATA 6.0 Gb/s x 2 (Optional 3 SATA Ports)
Internal 3.5”SATA HDD x 1 or 2.5”SATA HDD x 2
LCM with Keypad x 1
RJ-45 for Console x 1, USB3.0 x 2
250W AC Type Power Input
RAID 0,1 Support
VGA Header x 1

Network Appliance
FWS-7810
Chapter 1 General Information 1- 4
1.3 Specifications
System
Form Factor
1U 8-port Network Appliance
Processor
Intel® 4th generation Core™/ Xeon
System Memory
240-pin Dual-Channel ECC DDR3
1333/1600 DIMM Socket x 4, up to 32
GB
Chipset
Intel®C226
Ethernet (Optional)
Intel®82574L controller, Gigabit
Ethernet x 8 (optional up to 2 pairs
LAN bypass function)
BIOS
AMI BIOS ROM
Serial ATA
SATA 6.0 Gb/s x 2 (optional 3 SATA
ports)
Expansion Interface
Network Interface Module (NIM) x 1
(optional); PCI-E[x8] slot x 1 (optional)
Watchdog Timer
1~255 steps by software programming
RTC
Internal RTC
Storage
3.5”SATA HDD bay x 1 or 2.5”SATA
HDD bay x 2
System Fan
4 cm Ball Bearing Fan x 2
Front I/O Panel
Power LED x 1
Bypass LED (Optional up to 2)
Status LED x 1