A&L Technology LOUD SYSTEM User manual

Active Line Array system
USER’S MANUAL
LOUD
A&L Technology
A&L Technology Roterijstraat 130 B-8790 Waregem Belgium. ,Tel: [phone], [email protected]

Connections and Controls
Please refer to the following scheme and instructions:
1. INPUT: Balanced signal input (Combi) for connection of an external audio source (e.g., mixer).
2. LINK: Balanced signal output (XLR 3p) for connection of another LOUD active system.
4. PRESET LED:
5. PREST:
6. VOLUME: Master LEVEL system adjustment.
7. OUTPUT: Speaker output (NL4) for connection of the first LOUD205 array element. Min. load: 4Ohm. The other
3 array elements are signal linked from each other using the cables supplied.
8.
10. POWER ON: Illuminated on/off switch. Before switching the system on/off, always adjust the volume to zero.
11. FUSE: Fuse holder. Replace the fuse only with a fuse of the same type and rating. If the fuse blows repeatedly,
please contact an authorised service company.
3. USB: USB 2.0 port (type B) to connect the cable to establish communication between DSP and computer.
Preset LED indicator, from A to E, there are 5 storable and selectable presets.
Preset push button to select one of the 5 storable presets on the DSP, from A to E.
MAINS IN: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-in (blue).
9. MAINS OUT: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-out (white).
798
6
3
10
11
1 2 4 5
Active Line Array system
LOUD
S
U
E
F
CAUTION
RIS K O F E LECTR IC SHOCK . DO NOT OPE N.
To pr event electri cal sh ock d o n ot rem ove
the cov er. No use r s er vi cea ble pa rt s insi de .
Refer ser vi ce to qu al ifi ed per sonnel only.
BALANCED
PIN
SIGNAL SIGNAL
UNBALANCED
PIN
1 2 3 1 2 3
MAINS
85-264Vac
50HZ
OUTPUT
MID HI
PIN
SIGNAL
LOAD 4 Ohm min.
+1 -1 +2 -2
AC INPUT AC OUTPUT
POWER ON FUSE F 5A
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
Active line array system
Class D Amplifier
LOUD
Integrated DSP MID/HI 720W rms
720W rms
LOW
PRESET
-80dB 0dB
A B C D E
INPUT THROUGH
USB
SPEAKER OUT
A&L Technology
A&L Technology Roterijstraat 130 B-8790 Waregem Belgium. ,Tel: [phone], [email protected]

Connections and Controls
Dimensions
Please refer to the following scheme and instructions:
Active Line Array system
LOUD
INPUT LINK
Impedance - 16 Ohm
Power - 150W rms
+1 -1 +2 -2
OUTPUT MID HI
PIN
SIGNAL
205
LOUD
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
10. INPUT: Speakon compatible speaker connection. Bi-amp. setup (refer to the pinout printed in the connector
plate). Establish the connection between the subwoofer SPEAKER OUTPUT (6) and the first LOUD205 array
element.
11. LINK: Speakon compatible speaker link connection for connection of the next LOUD205 array element.
2
NOTE: the suited speaker cables (4x 1.5mm ) are supplied in the package.
10 11 INPUT LINK
Impedance - 16 Ohm
Power - 150W rms
+1 -1 +2 -2
OUTPUT MID HI
PIN
SIGNAL
205
LOUD
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
INPUT LINK
Impedance - 16 Ohm
Power - 150W rms
+1 -1 +2 -2
OUTPUT MID HI
PIN
SIGNAL
205
LOUD
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
INPUT LINK
Impedance - 16 Ohm
Power - 150W rms
+1 -1 +2 -2
OUTPUT MID HI
PIN
SIGNAL
205
LOUD
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
INPUT LINK
Impedance - 16 Ohm
Power - 150W rms
+1 -1 +2 -2
OUTPUT MID HI
PIN
SIGNAL
205
LOUD
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
492
492
450
170
500
340
Speakon out
from amplifier (6)
A&L Technology
A&L Technology Roterijstraat 130 B-8790 Waregem Belgium. ,Tel: [phone], [email protected]

Technical specifications
MODEL LOUD SYSTEM
TYPE Active Line Array system
ENCLOSURE DESIGN Bass reflex (LOUD15)
Trapezoidal array element (LOUD205)
POWER OUTPUT (RMS) 700W ( )LOUD15
400W ( )LOUD205
PROGRAM POWER 1600W
FREQUENCY RANGE 45Hz - 19kHz
NOMINAL IMPEDANCE Speaker OUT: 4ohm min.
TRANSDUCER TYPE 15" LF ( )LOUD15
2x 5" MF + 1" HF ( )LOUD205
DISPERSION Array length-splay dependent
CROSSOVER FREQUENCY Adjustable by integrated DSP
MAX. S.P.L. (PEAK) 129dB @ 1m ( )LOUD15
113dB @ 1m (LOUD205)
CONSTRUCTION 15mm birch plywood ( )LOUD15
15mm birch plywood ( )LOUD205
GRILLE Custom perforated metal grille
INSTALLATION, RIGGING, FLYING Integrated Al/Steel rigging system
DIMENSIONS (WxDxH)
490x340x170mm ( )LOUD205
490x495x430mm ( )LOUD15
WEIGHT 30Kg ( )LOUD15
7.5Kg ( )LOUD205
AMPLIFIER
POWER (RMS)
Class D - SMPS
720W + 720W
INDICATORS
OUTPUT/LINK
SPEAKER OUT
INPUT
Power, signal, preset in use
XLR 3p
XLR/Jack Combo connector
CONTROLS Master level, ON/OFF switch
PROTECTIONS
OPERATING VOLTAGE
Over current, short circuit, thermal, DC, HF
SMPS, 85-264Vac
Speakon® NL4
AC MAINS CONNECTOR NEUTRIK powerCON, Power-in / Power-out
Active Line Array system
LOUD
A&L Technology
A&L Technology Roterijstraat 130 B-8790 Waregem Belgium. ,Tel: [phone], [email protected]

FL-LOUD15 Flying frame for LOUD15
460 interior
280,8

471
FS-LOUD205 Stand support for LOUD205 stacking